Repair wiring harness tailgate, Highly flexible cable right side for BMW E61

Repair wiring harness tailgate, Highly flexible cable right side for BMW E61

Repair wiring harness tailgate right side for BMW E61 only for station wagon right side 20 -adrig BMW cross number 31 11 9 231 820 31119231820 Highly flexible, specially insulated copper wires with pre-assembled connectors to the shock Cable ends are ready for installation in a tailor-made Bellows introduced. This unit replaces your defective harness where Damaged area. Very high quality material guarantees an extremely long, disturbance Use. The item “Repair wiring harness tailgate, Highly flexible cable right side for BMW E61″ is in sale since Friday, October 28, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Wires & Electrical Cabling”. The seller is “car-parts24.eu” and is located in Berlin. This item can be shipped to European Union member countries.
  • Reference OE/OEM Number: BMW 31119231820
  • Placement on Vehicle: right
  • Brand: HERTH+BUSS
  • Manufacturer Part Number: 51277143
  • EAN: 4026736391980
  • MPN: 51277143

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part

Brand New GM Restoration Parts Quartz Cl ock Kit 12pc for 1969 Camaro. Includes the c enter dash clo ck w ith reset knob, b ezel and lens , mounting screws, and lens upper screws, wiring harness, light bulb and mounting clips. You can also pick it up at our Warrenville warehouse. The item “Dash Quartz Clock 12pc Kit 69 Camaro withcenter bezel wiring clips GM Resto Part” is in sale since Wednesday, November 06, 2013. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Interior\Dash Parts”. The seller is “wwwdrclassiccom” and is located in Warrenville, Illinois. This item can be shipped worldwide.
  • Manufacturer Part Number: E00110-KIT
  • Interchange Part Number: carrier panel quartz movement knob lens harness
  • Brand: D&R Classic Automotive

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans

Looking for an OEM Quality, Long Lasting, Stand Alone EFI Engine Management Harness? Well Look No More! As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality TXL (Polyethylene Cross Linked). All Harnesses are long enough for the PCM to be mounted under the dash. All Harnesses have a High Quality DELPHI Grommet installed on the Harness. Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes Completely Labeled. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. Will Work With 24x LS2 Engines With EV1 Injectors and Appropriate Extensions and Adapters. T56, Non-Electric Automatic or Manual Transmission. 5 Wire Mass Air Flow. If you have questions feel free to ask! The item “1997-2006 DBC LS1 STANDALONE WIRING HARNESS With T56 or Non-Electric Trans” is in sale since Sunday, October 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “bpautomotivellc” and is located in Columbia, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: BP Automotive
  • Manufacturer Part Number: H301
  • Warranty: Yes
  • Country/Region of Manufacture: United States

2014-2016 GMC Sierra Chevrolet Silverado Trailer Tow Mirror Wiring Harnesses new

2014-2016 GMC Sierra Chevrolet Silverado Trailer Tow Mirror Wiring Harnesses new

2014-2016 GMC Sierra Chevrolet Silverado Trailer Tow Mirror Wiring Harnesses new

2014-2016 GMC Sierra Chevrolet Silverado Trailer Tow Mirror Wiring Harnesses new

2014-2016 GMC Sierra Chevrolet Silverado Trailer Tow Mirror Wiring Harnesses new

2014-2016 GMC Sierra Chevrolet Silverado Trailer Tow Mirror Wiring Harnesses new

Old part #: 23171564 & 23171567 &. Left Hand Driver Side and Right Hand Passenger Side Trailer Tow Mirror Wiring Harness. Crew Cab or Extended Cab. If you are unsure if this is correct for your vehicle. Please send us the last 8 digits of your VIN. With it we will be able to determine for certain if it is applicable. We sell original Factory parts not aftermarket imitations. O riginal E quipment M anufactured parts are the same parts that came on your vehicle unlike aftermarket replicas. Parts are made of Thick High Quality Materials and will fit your vehicle perfectly. Trust in our factory trained Parts Countermen to insure you get the proper parts for your vehicles. We have more than 15 years of OEM parts experience. Need Camper Mirror Harness Kit Part # 23387133? Does the BCM need to be recalibrated? Does the memory module need to be recalibrated? 2014 2015 w/o AVF. The item “2014-2016 GMC Sierra Chevrolet Silverado Trailer Tow Mirror Wiring Harnesses new” is in sale since Friday, January 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Mirrors”. The seller is “big-3-oem-auto-parts” and is located in Red Bud, Illinois. This item can be shipped worldwide.
  • Manufacturer Part Number: 84125571, 84125561
  • Brand: GM
  • Other Part Number: 23171564, 23171567
  • Placement on Vehicle: Left
  • Part Brand: Factory, OEM
  • Genuine OEM: Yes
  • Make: Chevrolet GMC
  • Model: Silverado Sierra 1500 2500 3500
  • Years: 2014 2015 2016
  • Superseded Part Number: 23342727

LS1 LT1 LS7 Camaro MegaSquirt MS3-Pro Standalone ECU with 8′ Wiring Harness

LS1 LT1 LS7 Camaro MegaSquirt MS3-Pro Standalone ECU with 8' Wiring Harness

LS1 LT1 LS7 Camaro MegaSquirt MS3-Pro Standalone ECU with 8' Wiring Harness

LS1 LT1 LS7 Camaro MegaSquirt MS3-Pro Standalone ECU with 8' Wiring Harness

“LS1 LT1 LS7 Camaro MegaSquirt MS3-Pro Standalone ECU with 8′ Wiring Harness Compatible”. The MS3-Pro combines the features of the DIY MegaSquirt-3 with all available’expansions’ built right into a single circuit board in a sealed case. The o-ringed case is splashproof and, if you want continuous immersion resistance (the MS3-Pro displayed at PRI was at the bottom of a fish tank), it’s easy to add a bead of silicone for extra protection. Furthermore we’ve updated the power supply design to use a switching power supply to minimize energy consumption and maximize stability of operation down to as little as 6v! We also included the new intelligent knock sensor capability allowing for advanced knock windowing and noise threshold configuration, integrated internal SDCard datalogging with time stamping of all datalogs, USB and RS232 Serial tuning interfaces, individual cylinder tuning for fuel AND ignition timing to allow you to compensate for differentiation in flow characteristics to different cylinders and truly maximize engine output, and more! The MS3-Pro is ready to support a wide variety of engines out of the box, with the ability to anything with one to eight cylinders with sequential fuel injection and sequential’coil on plug’ ignition, a V12 with sequential fuel and wasted spark ignition, or a four rotor Wankel with separate leading and trailing ignition outputs. Over 50 different ignition modes are supported, from mainstream applications like the GM LS1, Bosch Motronic, and Chrysler Gen III Hemis to unusual modes like Renix Jeeps and the Suzuki Swift GTI. The MS3-Pro’s packaging is also a departure from most previous MegaSquirt EFI Systems. Instead of the industrial looking split aluminum case and D-sub connectors, the MS3-Pro uses a sealed high temperature nylon case for light weight and compact size, and heavy duty AMPSEAL connectors. This provides a compact and sealed enclosure protecting the sensitive internals from the elements. The MS3-Pro’s design keeps the heat generated to a minimum, allowing it to use a lighter plastic case instead of a metal heat sink. This package includes the MS3-Pro, all tuning cables, software and manual CD, and 8′ wiring harnesses. Here is a complete list of the MS3-Pro’s features. Freescale MC9S12X 16 bit, 50 MHz asymmetrical dual core processor. 10 saturated injector drivers. 8 logic level ignition outputs. 3 high current (5 amp) general purpose outputs – 2 can be reconfigured as additional injector drivers. 3 medium current (3 amp), high frequency general purpose outputs. All unused injector and ignition outputs can be used as SPARE outputs. This ECU has a LOT of I/O! 1 stepper H-bridge driver. Camshaft and crankshaft differential inputs – supports VR, Hall effect, and optical input. 12 volt tach output. 8 analog inputs (5 dedicated sensor inputs, 3 spare/general purpose). 4 spare digital on/off inputs. 3 spare digital frequency inputs. 2 knock sensor inputs. RS232, USB 2.0, and CAN communication. Onboard 8 gigabyte SD card for internal data logging. Internal ECU temperature sensor. Temperature range: -30 to +80 degrees C (-40 to +85 without battery for real time clock). Supports speed density, alpha-N, or MAF based fuel and spark tables. 1 microsecond injector pulse width resolution. Tables for nonlinear injector behavior at small pulse widths. Allows blending multiple load types, including specialized mode for independent throttle bodies. Supports a wide variety of OEM cam and crank position sensors. Individual cylinder trim tables for fuel and ignition. Accelerator pump or model based acceleration enrichment. Closed or open loop idle speed control. Closed or open loop boost control with gear or speed based tuning options. On/off or closed loop continuously variable valve timing control – supports up to 4 channels. On/off or progressive nitrous control. Rotary support – can run up to 4 rotor engines with separate leading and trailing spark tables. 16 x 16 fuel and spark tables – can be reconfigured to function as 30 x 16 or 16 x 30 by switching tables based on RPM or load. 2 or 3 step rev limiter with no-lift shifting. Wideband AFR target tables. Flex fuel sensor input. Allows repurposing injector or ignition outputs as general purpose outputs, or high current outputs as injector drivers for 12 cylinder sequential applications. Real time barometric correction. A/C and cooling fan control with idle compensation. Safety shutdown based on AFR or EGT input. Sequential shift cut and air shifter control. 6 General purpose on/off or PWM inputs. We custom build 2JZGTE engines and manufacture many custom parts for the Toyota 2JZ. We want our customers 100% satisfied. The item “LS1 LT1 LS7 Camaro MegaSquirt MS3-Pro Standalone ECU with 8′ Wiring Harness” is in sale since Sunday, September 25, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Performance Chips”. The seller is “brangersracing9352″ and is located in Elizabethtown, Kentucky. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Colombia, Panama, Jamaica.
  • Warranty: Yes
  • Brand: DIY AutoTune
  • Manufacturer Part Number: MS3Pro-PKG1

82-88 Camaro/Firebird TBI/TPI/Carb Engine Wiring Harness Used OEM

82-88 Camaro/Firebird TBI/TPI/Carb Engine Wiring Harness Used OEM

The picture is just for reference and you will not receive what is pictures but you will receive a good used engine harness. The item “82-88 Camaro/Firebird TBI/TPI/Carb Engine Wiring Harness Used OEM” is in sale since Friday, January 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “hawksmotorsports” and is located in Easley, South Carolina. This item can be shipped worldwide.
  • Brand: GM

21 Circuit EZ Wiring harness Chevy Mopar Ford hotrods Universal X-long wires

21 Circuit EZ Wiring harness Chevy Mopar Ford hotrods Universal X-long wires

This product is NEW and NEVER INSTALLED. COMPLETE NOSE TO TAIL GM WIRING HARNESS 12v fuse panel ignition headlight switch Keep It Clean’s Pro series of ultra small wire systems feature an easy to install design and allow for expandability for future growth. Keep It Clean Wiring Systems use only the highest quality wire and parts resulting in the ultimate wiring kit. To make installation a snap all Keep It Clean kits included detailed instructions, color-coded and labeled wire, and plug n play connectors. In addition to that you have access to certified toll free tech support to assist you with your installation and future wiring needs. 21 Circuit EZ Wiring harness Chevy Mopar Ford hotrods Universal X-long wires. All Pro series harness included extra long leads making them the idea choice for longer vehicles such as trucks, wagons, and muscle cars! Keep It Clean’s Pro series offers an ultra small fuse block that can be mounted in any position including under the dash or seat! Ideal for hot rods, race cars, and custom installations. Please note headlight switch knob is not included. (part number HDLSWKP) Wire your ride right the 1st time, wire your ride w/ Keep It Clean! The item “21 Circuit EZ Wiring harness Chevy Mopar Ford hotrods Universal X-long wires” is in sale since Monday, November 13, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “temcollc011″ and is located in Mustang, Oklahoma. This item can be shipped worldwide.
  • Brand: Eazy Wire
  • Manufacturer Part Number: EZ 21

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad

DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad. This is a DJI Phantom 3 4K Camera for the DJI Phantom 3 4K Edition. Includes 4K Camera with Brushless Gimbal, Camera Mount, wire harnesses, vibration grommets, anti-drop clips, and 16GB MicroSD card. This is a direct replacement for the DJI Phantom 3 4K Edition only. This is not compatible with Phantom 3 Advanced, Professional or Standard. Please make sure your aircraft has this tag on it this will assure you that this part will work with your unit. This is a new genuine DJI item from a DJI Phantom 3 4K Edition aircraft that is tested but never flown. The item “DJI Phantom 3 4K Edition Camera Part 119 Brushless Gimbal Wire Harness Quad” is in sale since Thursday, August 24, 2017. This item is in the category “Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Other RC Parts & Accs”. The seller is “midcityhobby” and is located in Waukesha, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion.
  • Manufacturer Part Number: Part 119
  • Brand: DJI
  • For Vehicle Brand: DJI
  • UPC: N/A
  • MPN: CP.PT.000321
  • Model: Phantom 3 4K

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150

Add Coast National Sales to your favorite stores and receive our exclusive emails about new items and special promotions! Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150. Planet Audio + Best Kits. Planet Audio Touchscreen DVD MP3 Bluetooth Navigation Stereo Receiver. 6.2 Widescreen Touchscreen Digital TFT Monitor. Compatible with audio output of iPod/ iPhone/ Smartphone & MP3 Player. Built-in Bluetooth technology for hands-free talking and audio streaming. Works with most Bluetooth enabled cell phones (up to 32.8 feet). MP3 ID3 Tag Display (Title/Artist/Album). Peak: 80W x 4 channels. Rms: 22W x 4 channels. Playback and Audio features. Plays CD, CD-R/RW, DVD, DVD-R/RW, MP3 and WMA Playback. Switchable US & Europe Tuner Frequencies. 3.5mm Front Auxiliary Input. SD Card reader for audio and video playback. Outputs: 3 Sets of 2V preamp outputs (front, rear and subwoofer). Backup Camera Input: Used for universal rear view cameras with an RCA composite input. Double DIN Install Dash Kit/ ISO Radio. Comes with oversized under radio storage pocket. Specially designed patent pending side mount brackets. Designed and contoured to match factory dashboard. Showing a gapless fit between the dash and the kit. Painted to match factory dash color. High-grade ABS plastic structure. Factory style texture design. All Necessary hardware included. Radio Housing Trim Plate. PAC Car Stereo Radio Replacement Interface. Enables factory features THXII amp when the factory radio is replaced. Data controlled RAP accessory output wire. Data controlled parking brake wire. Data controlled reverse trigger wire. Data controlled vehicle speed sense wire. Data controlled illumination output wire. Retains factory-installed amplified audio system. Retains rear seat entertainment and dual zone audio. Does not retain SYNC. Does not retain any of the radio related Ford “MyKey” features found in the 2011 vehicles. Vehicle Compatibility Chart may vary depending on vehicle options, production dates, and install application. It will not fit the base model, models with the factory navigation or Platinum models. Will not fit vehicles with Driver Info Button on radio panel. Return for replacement within: 14 days. We are not responsible for any excess charges. Local pick-up is available by appointment only, please inquire for more information. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Planet Audio Radio Stereo Dash Kit Wire Harness Interface for 09-12 Ford F-150″ is in sale since Tuesday, February 14, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “coast_national_sales” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Brand: Planet Audio + Best Kits
  • Manufacturer Part Number: PNV9674+FMK526+C2R-FRD1+CHR-A16
  • Interchange Part Number: Bluetooth Navigation Car Stereo Receiver
  • Other Part Number: Touchscreen/ USB/ SD Card input
  • Superseded Part Number: Metra 99-5820 95-5820B
  • Alternate Dash Part: Best Kits BKFMK526 BKFMK527
  • Other Dash Part: Scosche FD1438B
  • Interchange Harness Part: IF1026 PAC MS-FRD1
  • Other Harness Part: Scosche FDSR
  • Interchange Antenna Part: Metra 40-CR10
  • Alternate Antenna Part: Best Kits CR-6
  • Other Antenna Part: Scosche CRAB
  • Type: Installation dash kit Harness Antenna
  • Market Type: US Domestic Vehicles Only

Painless Wiring 60217 99-05 GM Vortec LS Swap Engine Harness, 4.8L 5.3L 6.0L

Painless Wiring 60217 99-05 GM Vortec LS Swap Engine Harness, 4.8L 5.3L 6.0L

America’s Oldest Speed Shop®. All new fuel injection harness with OEM fitment connectors and harness breakouts. OBDII connector, mounting bracket and check engine light. Crimp-on terminals, rubber grommet. Take advantage of GMs electronic engine management system with this Painless Wiring Harness. Complete stand alone harness allows you to install late model GM Truck 4.8, 5.3, or 6.0 Vortec fuel injected engines with mechanical throttle body, and correct computer into almost any chassis. Besides the obvious economy and driveability benefits, check out these other great features that make it easy and painless to install. ALDL (diagnostic) OBD II plug. Computer controlled fuel pump provision. The standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the dash or in the glove box. Number of Circuits: 10. Fuses with Ignition, Fuel Pump & Air Pump Relays. ECM, TPS, IAC, CTS, IAT, MAF, MAP, Injectors, Coils, CMP, CKP, Knock, VSS, ISS, 4L60E & 4L80E Transmissions, Front Bank 1 & 2 O2 Sensors. Emissions connections included in harness include: Secondary air pump, Secondary air solenoid, EGR, Canister vent and Canister purge. Printed Wire Tags on all Connectors and Open Ended Wires. Harness does not support Flex Fuel USCAR Injectors. 4 Feet Between Engine and ECM. For installations of 1999 – 2006, mechanical throttle body, Gen3 (4.8L – 5.3L – 6.0L) engines using ECMs with service #12200411 or #9354896. This harness does NOT support Flex Fuel USCAR Injectors. Year: 1999 – 2006. Model: C & K Truck. Engine: 4.8L, 5.3L, 6.0L w/ Mechanical Throttle Body. 8 Fuses with Ignition, Fuel Pump & Air Pump Relays. Includes wiring harnesses, all connectors, brackets, relays, and zip ties. By Hooty on February 27, 2017. Used to do 6.0l swap in my 98 Jeep wrangler. Easy To Set Up. Yes, I recommend this product. Related Items / Suggested Parts. Please pay for all items at the same time. We cannot combine your order if you have already paid. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 65 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. All exchanges need to have reshipping charges included. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Painless Wiring 60217 99-05 GM Vortec LS Swap Engine Harness, 4.8L 5.3L 6.0L” is in sale since Wednesday, April 08, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Other”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Painless Wiring
  • Manufacturer Part Number: 60217