7.3L Powerstroke Valve Cover Gasket Kit Gaskets, UVC Harnesses, Pigtails 94-97

7.3L Powerstroke Valve Cover Gasket Kit Gaskets, UVC Harnesses, Pigtails 94-97

7.3L Powerstroke Valve Cover Gasket Kit. W/ UVC’s and Pigtails. Fits all 1994 – Early 1997 Powerstroke. This set includes (2) valve cover gaskets, (4) UVC Harnesses (these are the under valve cover harnesses that connect to the glow plugs and injectors), and (4) external pigtails. These parts are packaged as a set in order to repair the very common issue that occurs when poor connections at the valve cover gasket cause the connection to overheat and meltdown. Replacing only the melted connector often results in a repeat failure because the poor contact issue remains. Even a slight amount of oil leaking into the connection seems to precipitate failure due to the high voltage involved. The injectors are powered by 110 VDC. Updated design eliminates the connection inside the valve cover gasket eliminating the most common failure point. NOTE TO 1997 OWNERS: Early 1997 trucks use TWO connectors per valve cover. Later trucks only use a single connector per valve cover. This kit will ONLY fit the earlier trucks with TWO connectors per valve cover. NOTE: While you have the valve cover off is also a great time to replace the glow plugs. We carry premium American made glow plugs as well. Keep in mind that a partially shorted glow plug can also cause the connector meltdown issue. PLEASE READ. We value your patronage. If a delay occurs that is longer than would normally be considered commercially acceptable, we will attempt to contact you. Please take a moment to read it. Local auto parts stores will not pay your travel costs to return a part either. Applications We guarantee our parts to be as described by part number, picture, and verbiage. While we do our best, vehicle applications, however, simply cannot be guaranteed. In most cases, we do not generate application lists. It is the nature of the auto parts business that, in rare cases, a part will not be correct for a certain vehicle even though it “should” fit. This may occur because of errors on application lists, mid-year production changes, changes to the vehicle since it was built, the fact that a car was not built for the US market, etc. If a part does not fit your vehicle, this does not mean the part is not as described. If you have suggestions, please let us know – we do value your input. Problems can be solved much more readily when civility is kept intact. The item “7.3L Powerstroke Valve Cover Gasket Kit Gaskets, UVC Harnesses, Pigtails 94-97″ is in sale since Friday, August 09, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Gaskets\Cyl. Head & Valve Cover Gasket”. The seller is “accuratediesel” and is located in Bitely, Michigan. This item can be shipped worldwide.
  • Brand: A/M
  • Interchange Part Number: 94 95 96 97 1994 1995 1996 1997
  • Manufacturer Part Number: F250 F350 F-250 F-350 7.3
  • Other Part Number: Gasket Under valve cover wiring harnesses injector
  • Warranty: Yes

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire

HQ – HZ 1 Tonner Rear Wiring Harness. This is a COMPLETELY NEW wiring harness apart from the genuine 11 way connector, which plugs into the dash harness in the drivers kick panel. This is made by AAR to suit the 1 tonner models & has been made to original length with all correct terminals, connectors, fuel sender fitting, 4 way connectors, wiring harness rosebud clips, glue less harness tape & original style cloth tape fitted. This has been made as per original in two sections & an extra wire has been added for reverse lights. A short lead is also supplied which will need to be installed onto the under dash harness (installation instructions will be supplied with loom). Kit comes with extra 2 four way connectors & terminals to fit to your tail lights & keep neat. Interior light wiring available in separate listing. Please ask any questions prior to purchasing. The item “Holden HQ HJ HX HZ 1 Tonner Cab/Body Wiring Harness to Tail Light Loom Wire” is in sale since Friday, November 20, 2015. This item is in the category “Vehicle Parts & Accessories\Car, Truck Parts\Lights, Indicators\Interior Lights”. The seller is “allautorecreations1″ and is located in Melbourne, Victoria. This item can be shipped worldwide.