03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec

PLEASE MESSAGE ME YOUR NEEDED FUEL INJECTOR CONNECTORS or message me a photo – EV1, EV6, MULTEC. This harness allows use of the factory VORTEC intake manifold and multec injectors with flex-fuel injectors (EV6 optional). This Standalone is Plug n’ Play design with FOUR wire hook-ups (switched power, constant power & ground connections required). Includes Detailed Installation Guide for Plug n’ Play Ease. All Engine & Transmission Sensor Connectors. ATO Style Fuse Block. Switched Power Ignition Relay. TCC / Switch Wiring. 2003, 2004, 2005, 2006, 2007 – Chevy, GMC, Cadillac & Hummer VORTEC engines with electronic throttle body &. T56 Manual or Non-Electronic (TH400, TH350, PowerGlide). These Standalones are designed with a sliding grommet seal & 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. The item “03-07 VORTEC StandAlone Wiring Harness with T56 Drive-by-Wire 4.8 5.3 6.0L Multec” is in sale since Tuesday, January 22, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped worldwide.
  • Superseded Part Number: T56 Manual or Non-Electronic transmission
  • Modified Item: Yes
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Interchange Part Number: 03-07LSVOR_DBW_T56
  • Type: StandAlone Wiring Harness
  • Manufacturer Part Number: HAR1015_03-07LSVR_DBW_T56
  • Other Part Number: 03-07LSVOR_DBW_T56
  • Brand: eMoto
  • Fitment Type: Performance/Custom
  • Warranty: Yes
  • Mounting Hardware Included: Yes

03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi

03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L80E 4.8 5.3 6.0 EV6. This has the adapter 4L80E that plugs into the 4L60E harness and you will have to pin 2 wires to the blue retainer. FREE ADAPTER Connectors TO CONVERT HarnessTO EV6 Injectors IF NEEDED. No one else includes the connectors. Please put in the buyers notes if you need Ev6 connectors. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality and better. All Harnesses are long enough for the PCM to be mounted under the dash (ADDED 36 FOR EASY COMPUTER MOUNTING). All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING). Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). MADE IN THE U. If you have any questions please ask. The item “03-07 LS Vortec Standalone Wire Harness Drive by wire 4L80E 4.8 5.3 6.0 Delphi” is in sale since Thursday, May 9, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Type: Wiring Harness
  • Manufacturer Part Number: 9101
  • Brand: HPI
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes

Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX

Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX

Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX

Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX

Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX

Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX

Kid’s & Video Games. Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX. Planet Audio / Best Kits. Planet Audio Touchscreen DVD MP3 Bluetooth Navigation Stereo Receiver. 6.2 Widescreen Touchscreen Digital TFT Monitor. Compatible with audio output of iPod/ iPhone/ Smartphone & MP3 Player. Built-in Bluetooth technology for hands-free talking and audio streaming. Works with most Bluetooth enabled cell phones (up to 32.8 feet). MP3 ID3 Tag Display (Title/Artist/Album). Peak: 80W x 4 channels. Rms: 22W x 4 channels. Playback and Audio features. Plays CD, CD-R/RW, DVD, DVD-R/RW, MP3 and WMA Playback. Switchable US & Europe Tuner Frequencies. 3.5mm Front Auxiliary Input. SD Card reader for audio and video playback. Outputs: 3 Sets of 2V preamp outputs (front, rear and subwoofer). Backup Camera Input: Used for universal rear view cameras with an RCA composite input. Single Double DIN Installation Dash Kit /ISO Radio. Specially designed side mount brackets. Designed to match factory dash contours. Showing a gapless fit between the dash and the kit. Painted to match factory dash color. High-grade & Heavy-duty ABS plastic structure. Car Radio Stereo General Motors OnStar Interface for Cadillac CTS/SRX. Plug and play interface that allows replacement of a factory stereo in the Cadillac CTS and SRX Vehicles. Maintains operation of the OnStar System and factory amplifier. Allows audio from the OnStar system to play through the two front factory speakers when OnStar is active, and mutes the new replacement radio. Supplies an accessory turn on wire and retains the RAP feature. Warning chimes are also fully retained. Class II circuitry will not disable vehicle data bus even if interface loses power. On Star active LED and Ignition on LED. Provides +12v switched accessory output. Mute output to either mute the aftermarket radio or to turn if off when On Star® is active. Vehicle Compatability Chart may vary depending on vehicle options, production dates, and install application. Retains Bose & Onstar (Does not retain Fade function). Not for vehicles with factory Navigation. Local pick-up is available by appointment only, please inquire for more information. We are not responsible for any excess charges. Return for replacement within: 14 days. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Planet Audio Car Radio Dash Kit OnStar Wire Harness for 03-07 Cadillac CTS SRX” is in sale since Monday, December 18, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “coast_national_sales” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Brand: Planet Audio / Best Kits
  • Manufacturer Part Number: PNV9674+GMK236+OS-2C-CTS+VW-A16L
  • Interchange Part Number: Bluetooth Navigation Car Stereo Receiver
  • Other Part Number: Rear Camera, Frt USB, 3.5mm, A/V Auxiliary, SD Card
  • Superseded Part Number: DK1114 Metra 99-2006
  • Alternate Dash Part: American International GM-K236
  • Other Dash Part: Scosche GM1586B
  • Interchange Harness Part: Metra GMOS-10
  • Alternate Harness Part: IF1064
  • Other Harness Part: Scosche GM20SR DCGM20SRB
  • Interchange Antenna Part: Metra 40-VW12
  • Alternate Antenna Part: American Intl VW6
  • Other Antenna Part: Scosche VWAB
  • Type: Installation dash kit Onstar Harness Antenna
  • Market Type: US Domestic Vehicles Only

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L60E 4.8 5.3 6.0 EV6. FREE ADAPTER Connectors TO CONVERT HarnessTO EV6 Injectors IF NEEDED. No one else includes the connectors. Please put in the buyers notes if you need Ev6 connectors. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality and better. All Harnesses are long enough for the PCM to be mounted under the dash (ADDED 36 FOR EASY COMPUTER MOUNTING). All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING). Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). MADE IN THE U. If you have any questions please ask. The item “03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L60E 4.8 5.3 6.0 Multec” is in sale since Monday, May 6, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Type: Wiring Harness
  • Manufacturer Part Number: 9101
  • Brand: HPI
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec

Harness allows use of the factory VORTEC intake manifold and multec injectors with flex-fuel injectors (EV6) optional. This standalone is completely plug & play with four wire hookup (switched power, constant power & ground connections required). Harnesses are designed with a sliding grommet seal and 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Please Note: Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. Complete engine & transmission wiring harness including all engine & transmission sensor connectors, ALDL connector, ATO Style fuse block, fuel pump relay, switched power ignition relay, performance shift mode wiring, MIL light wiring, P/N Wiring, TCC/Switch wiring, tach wiring, complete detailed instructions. The item “03-07 VORTEC StandAlone Wiring Harness with4L60E Drive-By-Wire 4.8 5.3 6.0 Multec” is in sale since Saturday, February 23, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped worldwide.
  • Superseded Part Number: 0307VORTEC_DBW_60E
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Interchange Part Number: 03-07LSVORTEC_DBW_60E
  • Manufacturer Part Number: 03-07LSVOR_DBW_60E
  • Other Part Number: 0307VORTEC_DBW_60E
  • PSI: Custom StandAlone Conversion Harness
  • Brand: eMoto
  • Fitment Type: Performance/Custom
  • Warranty: Yes
  • Mounting Hardware Included: Yes

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L80E 4.8 5.3 6.0 Multec

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L80E 4.8 5.3 6.0 Multec

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L80E 4.8 5.3 6.0 Multec

03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L80E 4.8 5.3 6.0 Multec

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L60E 4.8 5.3 6.0 EV6. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and multec injectors with flex-fuel injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. The item “03-07 LS Vortec Standalone Wiring Harness Drivebywire With4L80E 4.8 5.3 6.0 Multec” is in sale since Monday, January 7, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “maddogperformance” and is located in Brandon, Florida. This item can be shipped worldwide.
  • Manufacturer Part Number: 9101
  • Brand: CNCH
  • Fitment Type: Performance/Custom
  • Type: Wiring Harness
  • Bundle Listing: Yes

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07

JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07. Honda Emblem Not Included – Reuse Factory Emblem. Precision injection molded – Direct replacement bumper. Upgrade your Honda’s appearance with our JDM Style front bumper cover with fog lights and grille conversion. Our bumpers are made from durable polypropylene which retains it’s shape better when compared to polyurethane components. Comes unpainted so that you can color match it to your vehicle’s OEM paint. Fog Lights are designed with better optics to further enhance night time visibility by maximizing light output. JDM Style Front Bumper Cover -Precision Injection Molded. Impact resistant and flexible. Direct install with no modification necessary. JDM Style Fog Lamps -JDM Style replacement fog lamps with upgraded optic and lenses. Computer designed reflectors offers excellent beam control while maximizing output. Lenses made of UV treated Polycarbonate JDM Style Front Grille -Simple Bolt-on Design. Stylish Chrome / Black Finish. What’s in the box. 1 x JDM Style Front Bumper Cover 1 x JDM Style Front Grille 1 x JDM Style Clear Fog Lights 1 x Wiring Harness 1 x OE Style On/Off switch. Front Bumper Cover – Polypropylene. Front Grille – ABS Plastic. Fog Light Lens – Polycarbonate. What you might need for installation. Installation hardware not included – Reuse OE Hardware. Installation Instruction Not included. Front Bumper Cover – Black. Fog Lights Lens – Clear. We compare prices for you. 63068C17835 JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07. The item “JDM Front Bumper Cover Conversion Foglight Clear Pair Grille For Accord 4D 03-07″ is in sale since Friday, November 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “carpartsconnection.inc” and is located in Rowland Heights, California. This item can be shipped worldwide.
  • Brand: CPC
  • Other Part Number: 71121-SDA-A00 08V31-SDA-101 08V31-SDA-102 Wire Harness Fog Lamp
  • Warranty: 90 DAY
  • Interchange Part Number: 2003 04711-SDA-A90ZZ 04711-SDL-A90ZZ Foglights Grille Grill Trim
  • Color: Black, Chrome
  • Manufacturer Part Number: Replacement Conversion Upgrade 03 04 05 06 07 2007 2006 2005 2004
  • MPN: 193799
  • Material: Polypropylene, ABS Plastic
  • Surface Finish: Unpainted
  • Installation Instruction: Not included

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVEBYWIRE With4L60E 4.8 5.3 6.0 Multec

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVEBYWIRE With4L60E 4.8 5.3 6.0 Multec

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVEBYWIRE With4L60E 4.8 5.3 6.0 Multec

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVEBYWIRE With4L60E 4.8 5.3 6.0 Multec

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L60E 4.8 5.3 6.0 EV6. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and multec injectors with flex-fuel injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. The item “03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVEBYWIRE With4L60E 4.8 5.3 6.0 Multec” is in sale since Friday, May 25, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “maddogperformance” and is located in Brandon, Florida. This item can be shipped worldwide.
  • Bundle Listing: Yes
  • Type: Wiring Harness
  • Manufacturer Part Number: 9101
  • Brand: CNCH
  • Fitment Type: Performance/Custom

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35

Its FINALLY here fully functional interior in your 350z with a 2JZ engine swap. The Wiring Specialties CANbus harness does the trick – Tach, engine temp and no fault lights for traction control and stability control. Have a properly running car again, with the power of a 2JZ engine. All of these features come with NO CORES needed. Our Pro-Series is ideal for those looking for the best aesthetics, weight savings and reliability. This harness completely replaces the 350z original engine harness with a PRO series JZ harness with proper fitment. The harness is designed’Tucked’ for a clean installation. The harnesses are built to exceed OEM spec for wire quality and power/ground routing. Wiring Specialties has developed the CANBUS converted device to allow full gauge functionality, fan control and all of this in a plug and play package. No CORE needed, Plug and Play, startup guaranteed. Engine: JZS147 and JZA80. Any non-VVTI 2JZGTE from MKIV Supra. Chassis: LHD USDM Z33 350z. Retains factory FANS, Speedometer, tachometer, engine temperature gauge, oil pressure gauge, alternator charge light, reverse lights and wipers. The Wiring Specialties harness provides proper 350z gauge cluster functionality for the JZ engine swap. ECU output functions such as Tach, Engine coolant temp, CEL, Speedometer, fuel gauge and illumination are all supported by the proprietary CANbus controller, included in this kit. Fans functionality the factory Z has very capable fans and controllers. We suggest keeping them for the swap, when possible. The Wiring Specialties CANbus Controller retains the factory fan functionality, with pre-set engine temp turn ON and OFF points. We also provide an override for FULL ON fan function by engaging the DSC button. Plug and play features of this harness require the OEM 350Z body harness, body control module and fuse boxes to be UNMODIFIED. The harness utilizes a number of relays and controllers that OEM 350z, so they need to remain on the chassis fuse box, in stock form. For proper ECT gauge functionality the. Supplied GM ECT sensor must be installed into the coolant elbow on the JZ. This is the 2-wire sending unit. Harness connection will be provided at the exact temp sender location. For proper Oil Pressure Gauge function, the 350z OEM oil pressure sending unit needs to be used (located behind the JZ AC compressor). In most cases a relocation line needs to be used in order to use the Nissan sensor with the swap. Harness connection will be provided to reach the passenger side shock tower for sensor relocation (optional). A/C option is available as a custom feature. Please inquire with our sales team about pricing. AEM Infinity and ECU Masters ECUs (and other standalone ECUs) are able to process a wideband signal and are wired DIRECTLY to the ECU. The LSU 4.2 Version of the Wideband SHOULD be used, as per AEM and ECU Masters. Select the Oval or Rectangular connector style in the options. All ECUs that are unable to process a wideband signal directly, will be wired for a FACTORY o2 sensor and a flying lead will be provided to connect the ECU to the Wideband controller (not supplied with the kit). For ECUs that do not process a raw wideband signal, a controller must be used. Controllers like a EUGO or the Haltech CAN wideband should be used. AEM Infinity and ECU Masters are pre-wired for Oil Pressure, Fuel pressure, Oil Temp, IAT and MAP sensor wiring directly to the ECU. INCLUDED WITH THIS PRO-SERIES HARNESS. Main Engine and Transmission one-piece tucked harness. 2x knock sensor connections. 4x VSV twin Turbo control connectors (Twin Turbo option only). ECT connector (ECU input). Coolant gauge connector (for canbus controller). Boost solenoid wiring (with AEM/Haltech or aftermarket computers). 12-pin and 4-pin igniter chip connectors (relocated to inside the car). 2x Cam sensor connector. Idle air motor connector. OEM Oxygen sensor connectors (wideband wiring is not part of the EFI harness, except AEM Infinity 6/8 or Haltech Elite). 2x ground ring terminals. Reverse lights sensor connector. 350Z Oil pressure connector (optional). ECU Diagnostics mode connector. No traction Control wiring supplied. Turn Key ENGINE START Guarantee. Tech support for our customers 7 days a week. The item “Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35″ is in sale since Sunday, October 16, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Charging & Starting Systems\Other”. The seller is “autocat51″ and is located in West Covina, California. This item can be shipped worldwide.
  • Brand: WSP
  • Manufacturer Part Number: WRS-PRO2J-350Z

Incoming search terms:

  • 2JZ G35 wiring harnes

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 03 -’07 Vortec Drive by Wire Standalone Wiring Harness. Application’03 -’07 Chevy, GMC, Cadillac, and Hummer Vortec Engines with Electronic Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’03 -’07 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Note: If using an LS style car intake with EV1 fuel injectors please order HAR-1016. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 03 -’07 Vortec Engines require’03 -’07 Vortec (Blue & Green) PCM (Service Number 12586242), contact. Harness is designed to use Multec fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. Vortec Drive by Wire harnesses require 8 pin Throttle Body (GM P/N 12570800 or equivalent) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0″ is in sale since Wednesday, December 06, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand.
  • Manufacturer Part Number: HAR-1014
  • Warranty: Yes
  • Brand: PSI