03-07 LS Vortec Standalone Wiring Harness Drive By Cable 4L80E 4.8 5.3 6.0 DBC

03-07 LS Vortec Standalone Wiring Harness Drive By Cable 4L80E 4.8 5.3 6.0 DBC

03-07 LS Vortec Standalone Wiring Harness Drive By Cable 4L80E 4.8 5.3 6.0 DBC

03-07 LS Vortec Standalone Wiring Harness Drive By Cable 4L80E 4.8 5.3 6.0 DBC

03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY Cable W/4L60E 4.8 5.3 6.0 Multec. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. Harness allows use of the factory Vortec intake manifold and multec injectors with flex-fuel injectors (EV6) optional. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. The item “03-07 LS Vortec Standalone Wiring Harness Drive By Cable 4L80E 4.8 5.3 6.0 DBC” is in sale since Monday, August 10, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “jackspaniaracing” and is located in Brandon, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Brand: Unbranded
  • Type: Wiring Harness
  • Fitment Type: Performance/Custom
  • Manufacturer Part Number: 9101
  • Bundle Listing: Yes

LS Swap Standalone Wiring Harness 97-06 LS1 Drive-By-Cable with 4L60E 4L80E Trans

LS Swap Standalone Wiring Harness 97-06 LS1 Drive-By-Cable with 4L60E 4L80E Trans

LS Swap Standalone Wiring Harness 97-06 LS1 Drive-By-Cable with 4L60E 4L80E Trans

LS Swap Standalone Wiring Harness 97-06 LS1 Drive-By-Cable w/ 4L60E 4L80E Trans. Harness fits 97-06 Gen III LS Based engines. Set up for Drive by Cable throttle body, EV1 injectors, and rear mount camshaft position sensor. EV1 to EV6 injector adapters included. For 4L60E, 4L70E 4L75E Transmissions, (4L80E also supported with separate adapter harness). Uses LS1 style MAP sensor, for LS3 style sensor you will need our 81033 adapter harness. For use with GM 9354896 or 12200411 (Commonly known as 0411) PCM’s. Our central location in Des Moines, Iowa offers top quality products at affordable prices to all automotive enthusiasts in the continental United States. The showroom offers the unique experience for customers to touch and feel the performance products they are purchasing and learn more about the Chevrolet Performance line. Karl Kustoms is a division of Karl Chevrolet. Carl Moyer started Karl Chevrolet in a small showroom in Ankeny in 1978. Over the years the dealership became the number one dealership in Iowa, and eventually the Midwest. In 2006, Karl Chevrolet gained the recognition as #1 GM Certified Pre-Owned Dealer in the nation. Karl Chevrolet- Your dealer for life! Please see the “Compatibility” link at the top of the listing. Fitment information may not be available for all products and those without fitment will not have a Compatibility link. Please be sure to view the “Notes” option for important details if it is available. We are unable to guarantee a specific carrier. We are unable to send an order without an invoice. Our goal is to ensure our customers are taken care of. Please send us a message before ordering, if you are unsure an item will work for your application. Powered by SixBit’s eCommerce Solution. The item “LS Swap Standalone Wiring Harness 97-06 LS1 Drive-By-Cable with 4L60E 4L80E Trans” is in sale since Tuesday, February 9, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “karlkustomparts” and is located in Des Moines, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Brand: Karl Performance Parts
  • Manufacturer Part Number: WH1201
  • Interchange Part Number: Painless 60217
  • Other Part Number: Drive By Cable

LS3 LS2 6.2L STANDALONE HARNESS 4L80E 58X DRIVE BY WIRE DBW truck corvette pedal

LS3 LS2 6.2L STANDALONE HARNESS 4L80E 58X DRIVE BY WIRE DBW truck corvette pedal

We sell alot of different standalone harnesses, If you need a different harness then check out the link below. You can message them and see for your self. We also sell thousands of fuel injectors every year too. LS3 LS2 6.2L HPI STANDALONE WIRING HARNESS 4L80E. 58X DRIVE BY WIRE. Super simple chassis connections – no OEM fuseboxes needed. Ignition, Fuel Pump & Gauges – a handful of labeled wires for you to connect. Fully finished harness – all loom secured and engine / transmission connectors attached. Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, LS3 5 wire MAF, LS3 Map Sensor and EV6, LS3 injector connectors, NON VVT. Corvette or truck throttle pedal. Truck requires switching 2 pins in the connector. We have the directions for that. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). FREE ADAPTER Connectors TO CONVERT Harness from EV6 to EV1 OR (DELPHI MULTI 4.8 5.3 or 6.0) Injectors IF NEEDED. No one else includes the connectors. Harness comes with a complete install instruction packet. MADE IN THE U. The item “LS3 LS2 6.2L STANDALONE HARNESS 4L80E 58X DRIVE BY WIRE DBW truck corvette pedal” is in sale since Wednesday, August 26, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Modified Item: No
  • Custom Bundle: No
  • Part Brand: HPI
  • Manufacturer Part Number: 1999-2007 LS3 LS2 stand alone harness
  • Brand: 1999-2007 LS3 LS2 stand alone harness
  • Non-Domestic Product: No
  • Warranty: 1 Year

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module

Stand alone 6.5 TD 4 speed 4l80e transmission harness and transmission control module. We have designed a plug and play solution to the daunting task of wiring your 4 speed 4l80 transmission into your humvee. Our customers have reported that they have been able to wire there Hmmwv’s start to finish in 30 minutes to 1 hr. We manufacture 3 different systems that will plug directly into you existing engine harness. We have one for a 6.5 turbo diesel full drive train swap, one for a 6.5 naturally aspirated full drive train swap or 4 speed retro fit , and one specially designed for a V belt set up if you are adding a 4 speed to an existing 3 speed v belt set up. Included in your kit is. Black Dog stand alone 6.5 TD wire harnesses. All hardware, fasteners, grommets. Detailed step by step installation instructions. We also have quite a few clients abandoning their factory OEM 4 speed TCM’s for our superior system on their M1043, M1045, M1097, and M1123′s. The factory OEM set up on these trucks is early 1990′s technology, compared to our modern technology with our US shift TCM there is no comparison. The item “HMMWV 6.5 TD 4 speed 4L80e stand alone wire harness, Transmission control module” is in sale since Sunday, March 31, 2019. This item is in the category “Collectibles\Militaria\Surplus\Other Military Surplus”. The seller is “blackdogcustoms” and is located in Madison, Georgia. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Panama, Jamaica, Brunei darussalam, Bolivia, Ecuador, Guadeloupe, Jordan, Cambodia, Luxembourg, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Bangladesh, Egypt, French guiana, Guernsey, Gibraltar, Iceland, Jersey, Liechtenstein, Monaco, Macao, Martinique, Nicaragua, Canada, South africa, Colombia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion.
  • Country/Region of Manufacture: United States
  • Type: Tranmission harness

1999-2006 DBW LS1 Standalone Wiring Harness With 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness With 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness With 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness With 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness With 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness With 4L80E Trans

We have been building high quality harnesses for over 10 years for our personal local customers and have had such great success, we have decided to sell them to the public. We make the electrical portion of your swap easy. 3 wires to hook up and your all set to turn the key! (Fans, Tach, Speedo, and other features ARE included but not necessary to start the vehicle). You have already figured out the engine mounting, exhaust, and fuel, let us do the wiring for you! If you can think it, we can wire it in for you! (additional charges may be required but we will work with you). We have done over 150 swaps and can help with any questions you might have. We are here to help! The item “1999-2006 DBW LS1 Standalone Wiring Harness With 4L80E Trans” is in sale since Wednesday, June 5, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “directautowire1″ and is located in Las Vegas, Nevada. This item can be shipped worldwide.
  • Manufacturer Part Number: LS9906DBW4L80E
  • Brand: DIRECT AUTO WIRE
  • Custom Bundle: No
  • Non-Domestic Product: No
  • Modified Item: No
  • Warranty: 60 Day
  • Country/Region of Manufacture: United States

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module

Stand alone V belt existing 3 speed to 4 speed 4l80e transmission harness and transmission control module. We have designed a plug and play solution to the daunting task of wiring your 4 speed 4l80 transmission into your humvee. Our customers have reported that they have been able to wire there Hmmwv’s start to finish in 30 minutes to 1 hr. We manufacture 3 different systems that will plug directly into you existing engine harness. We have one for a 6.5 turbo diesel full drive train swap, one for a 6.5 naturally aspirated full drive train swap or 4 speed retro fit , and one specially designed for a V belt set up if you are adding a 4 speed to an existing 3 speed v belt set up. Included in your kit is. Black Dog stand alone V belt Modification wire harnesses. All hardware, fasteners, grommets. Detailed step by step installation instructions. We also have quite a few clients abandoning their factory OEM 4 speed TCM’s for our superior system on their M1043, M1045, M1097, and M1123′s. The factory OEM set up on these trucks is early 1990′s technology, compared to our modern technology with our US shift TCM there is no comparison. The item “HMMWV 4 speed 4L80e stand alone wire harness, v belt Transmission control module” is in sale since Sunday, March 31, 2019. This item is in the category “Collectibles\Militaria\Surplus\Other Military Surplus”. The seller is “blackdogcustoms” and is located in Madison, Georgia. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Panama, Jamaica, Brunei darussalam, Bolivia, Ecuador, Guadeloupe, Jordan, Cambodia, Luxembourg, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Bangladesh, Egypt, French guiana, Guernsey, Gibraltar, Iceland, Jersey, Liechtenstein, Monaco, Macao, Martinique, Nicaragua.
  • Country/Region of Manufacture: United States
  • Type: Tranmission harness

03-07 LS Vortec Stand alone Harness Drive by wire 4L80E 4.8 5.3 6.0 DBW BIG SALE

03-07 LS Vortec Stand alone Harness Drive by wire 4L80E 4.8 5.3 6.0 DBW BIG SALE

You can message them and see for your self. We also sell thousands of fuel injectors every year too. 03-07 LS VORTEC STANDALONE WIRING HARNESS DRIVE BY WIRE W/4L80E 4.8 5.3 6.0 EV6. FOR DRIVE BY WIRE THROTTLE BODY ONLY. You will have to pin 2 wires to the blue retainer for 2nd vss, Comes with instructions. FREE ADAPTER Connectors TO CONVERT HarnessTO EV6 Injectors IF NEEDED. No one else includes the connectors. Please put in the buyers notes if you need Ev6 connectors. APPLICATION: 2003 – 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E OR 4L80E TRANSMISSIONS. PARTS INCLUDED: Complete Engine and Transmission Harness, Instruction Manual. NOTES: These harnesses are designed for retrofitting’03 -’07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E or 4L80E transmissions into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 – 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. As you can imagine, there is a LOT that goes into making an engine harness. There is even MORE that goes into making a Quality Engine Harness! All of our harnesses are built with OEM Quality and better. All Harnesses are long enough for the PCM to be mounted under the dash (ADDED 36 FOR EASY COMPUTER MOUNTING). All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING). Many Companies Do NOT Use GM Color Codes. High Quality Reinforced Ring Terminals. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat. All Factory CPA (Connector Position Assurance Locks). 100% HANDMADE , right here in the U. Harness comes with a complete install instruction packet. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction Indicator, and a DLC Port. 36 ADDED LENGTH FOR EASY COMPUTER MOUNTING. UPGRADED WIRE FOR RUNNING THOSE BIG INJECTORS (will run any size injector without issues). MADE IN THE U. If you have any questions please ask. The item “03-07 LS Vortec Stand alone Harness Drive by wire 4L80E 4.8 5.3 6.0 DBW BIG SALE” is in sale since Sunday, March 15, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “highperformanceinjectors219″ and is located in Hobart, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Type: Wiring Harness
  • Manufacturer Part Number: 9101
  • Brand: HPI
  • Fitment Type: Performance/Custom
  • Bundle Listing: Yes

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans

1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans

StandAlone Swap Harness designed for. Engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory VORTEC intake manifold and Multec injectors. This Standalone is a Plug n’ Play design with 3-wire hook-ups (switched power, constant power & ground connections minimum required to start engine). Includes Detailed Installation Guide for Plug n’ Play Ease. All Engine & Transmission Sensor Connectors. ATO Style Fuse Block. Switched Power Ignition Relay. TCC / Switch Wiring. Chevy, GMC, Cadillac & Hummer VORTEC engines with electronic throttle body & 4L80E transmissions. These Standalones are designed with a sliding grommet seal & 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. The item “1999-2006 DBW LS1 Standalone Wiring Harness Swap 4L80E Trans” is in sale since Wednesday, December 18, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “ampmotorsport” and is located in Altamonte Springs, Florida. This item can be shipped worldwide.
  • Superseded Part Number: LS_4L80E_999DBW-SWAP
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Manufacturer Part Number: AmpLS_4L80E_999DBW
  • Other Part Number: LS_4L80E_999DBW
  • Brand: AmpMoto
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Warranty: 60 Day

2008-15 LS3 (6.2L) Standalone Wiring Harness with 4L80E 58X Drive-By-Wire DBW

2008-15 LS3 (6.2L) Standalone Wiring Harness with 4L80E 58X Drive-By-Wire DBW

2008-15 LS3 (6.2L) Standalone Wiring Harness with 4L80E 58X Drive-By-Wire DBW

2008-15 LS3 (6.2L) Standalone Wiring Harness with 4L80E 58X Drive-By-Wire DBW

Free adapter connectors TO CONVERT Harness TO EV6 or EV1 Injectors (only if needed). Please message us in Buyers notes if you need EV6 or EV1 connectors. Otherwise, if left blank, Delphi Multec connectors will be sent by default. Standalone_4L 8 0E_6.2LS3. 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015. 4 (6.2L) Engines w/ Electronic Throttle Body w/ 4L80E Transmission (Gray 58X Crank Reluctor Only). AmpMoto StandAlone Functions Include. Complete Engine & Transmission Wiring Harness including all engine & transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. AmpMoto harnesses are designed for 2008 – 2015 LS3 engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. This AmpMoto Standalone is a complete plug n’ play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Our AmpMoto harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. This harness is non-emissions equipped vehicles and do not include air pump or EGR provisions. The item “2008-15 LS3 (6.2L) Standalone Wiring Harness with 4L80E 58X Drive-By-Wire DBW” is in sale since Sunday, June 9, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “ampmotorsport” and is located in Altamonte Springs, Florida. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Type: Fuel Injector & Transmission Standalone Harness
  • Manufacturer Part Number: 4L80e_LS3
  • Other Part Number: 6.2LS3-4L80e
  • Brand: AmpMoto
  • Fitment Type: Performance/Custom
  • Non-Domestic Product: No
  • Warranty: Yes

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec

2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec

This harness allows use of the factory VORTEC intake manifold and multec injectors. This Standalone is a Plug n’ Play design with FOUR wire hook-ups (switched power, constant power & ground connections required). Includes Detailed Installation Guide for Plug n’ Play Ease. All Engine & Transmission Sensor Connectors. ATO Style Fuse Block. Switched Power Ignition Relay. TCC / Switch Wiring. 2003, 2004, 2005, 2006, 2007 – Chevy, GMC, Cadillac & Hummer VORTEC engines with electronic throttle body & 4L80E transmissions. These Standalones are designed with a sliding grommet seal & 4-5 ft. Of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation. Harnesses are for non-emissions equipped vehicles & do not include air pump or EGR provisions. The item “2003-2007 LS STANDALONE WIRING HARNESS 4L80E VORTEC Drive By Wire Multec” is in sale since Thursday, April 18, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “euroecycles” and is located in Maitland, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Superseded Part Number: 0307VORTEC_DBW_80E
  • Modified Item: Yes
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Interchange Part Number: 0307VORTEC_DBW_80E
  • Type: Standalone Fuel injection & Transmission Harness
  • Manufacturer Part Number: 03-07LSVOR_DBW_80E
  • Other Part Number: 0307VORTEC_DBW_80E
  • Brand: eMoto
  • Fitment Type: Performance/Custom
  • Warranty: Yes
  • Mounting Hardware Included: Yes