18-19 Jeep Wrangler JL New Body 7 Way Trailer Tow Wiring Harness Factory Mopar

18-19 Jeep Wrangler JL New Body 7 Way Trailer Tow Wiring Harness Factory Mopar

18-19 Jeep Wrangler JL New Body 7 Way Trailer Tow Wiring Harness Factory Mopar

18-19 Jeep Wrangler JL New Body 7 Way Trailer Tow Wiring Harness Factory Mopar

New Mopar Hitch Receiver Wiring Harness. Fits 2018 to 2019 Jeep Wrangler JL. Kit includes harness, module, tie straps, connector, and loose in-line connector. Harness includes a seven/four-way connector to enable trailer stop, turn, reverse, park lights and brake circuit to IP and B+ circuit. This part is OEM and a Quality Fit!!! If you are unsure of compatibility, please send us your VIN to verify application!!! We have the lowest priced parts and accessories in America!!!! Simply supply us with your full physical address. Please be sure to check your spam mailbox. A physical street address is required!!!! Box addresses will not be accepted no exceptions!!! Before placing your order. MoparĀ® parts and Magneti Marelli offered by MoparĀ® parts installed by an authorized Chrysler Group LLC dealership or studio are warranted against defects in workmanship or materials for 24 months / unlimited miles for both parts and labor. Warranties are only valid in the U. If for any reason you are not satisfied with your part(s); i. Quality, fit, incorrect item, etc. , you can return the part(s) within 10 days of receipt. Electrical parts are non-returnable/non-refundable. Damaged Package/Part(s) In Transit. If your package/part has been damaged, you will need to fill out a claim report form from that Carrier in order to be reimbursed. Do not return the package/part to Steve White Motors. The item “18-19 Jeep Wrangler JL New Body 7 Way Trailer Tow Wiring Harness Factory Mopar” is in sale since Thursday, March 8, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Towing & Hauling”. The seller is “stevewhitemotors” and is located in Hickory, North Carolina. This item can be shipped worldwide.
  • Brand: Mopar
  • Manufacturer Part Number: 82215896
  • Warranty: 2 Year
  • Bundle Listing: No
  • California Prop 65 Warning: WARNING: Cancer and Reproductive Harm AVERTISSEMENT: Cancer et Troubles de l’appareil reprducteurADVERTENCIA: Cancer y Dano Redproductivowww.P65Warnings.ca.gov
  • Placement on Vehicle: Rear
  • Fitment Type: Direct Replacement
  • MODEL: 2018 WRANGLER JL NEW BODY STYLE ONLY
  • YEAR: 2018
  • MAKE: JEEP
  • Superseded Part Number: 82215398AB

Rear body tail light lamp wiring harness Chevy GMC pickup truck 73-78 stepside

Rear body tail light lamp wiring harness Chevy GMC pickup truck 73-78 stepside

This is a new rear body tail lamp light wiring harness for Chevy & GMC trucks. This goes from the rear frame connector to the rear light assemblies. This does not fit fleetside bed trucks. (Photo may not be of actual item, but to give graphic representation). EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original GM blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 copo yenko nickey ss rs rs/ss super sport ls6 l37 ls5 ls7 l78 350 327 383 400 402 396 427 454. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “Rear body tail light lamp wiring harness Chevy GMC pickup truck 73-78 stepside” is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Lighting & Lamps\Tail Lights”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.

Jeep Willys M170 Main Body Wiring Harness G758 NOS

Jeep Willys M170 Main Body Wiring Harness G758 NOS

Jeep Willys M170 Main Body Wiring Harness G758 NOS

Jeep Willys M170 Main Body Wiring Harness G758 NOS

Jeep Willys M170 Main Body Wiring Harness G758 NOS

Jeep Willys M170 Main Body Wiring Harness G758 NOS

It will NOT fit on the M38A1. These are no longer in original packaging, and are covered in dust, but are gorgeous, as you can tell by the photos. This is a great price for this NOS harness, but I only have a limited supply. The item “Jeep Willys M170 Main Body Wiring Harness G758 NOS” is in sale since Thursday, November 3, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Gauges”. The seller is “armytankguy” and is located in College Station, Texas. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Type: Willys

2018 2019 Jeep Wrangler Jl New Body 7 Way Trailer Tow Wiring Harness Oem Mopar

2018 2019 Jeep Wrangler Jl New Body 7 Way Trailer Tow Wiring Harness Oem Mopar

Fits 2018 2019 Jeep Wrangler (JL). Harness includes a seven/four-way connector to enable trailer stop, turn, reverse, park lights and brake circuit to IP and B+ circuit. Kit includes harness, module, tie straps, connector, and loose in-line connector. The item “2018 2019 JEEP WRANGLER JL NEW BODY 7 WAY TRAILER TOW WIRING HARNESS OEM MOPAR” is in sale since Friday, February 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Towing & Hauling”. The seller is “coppus” and is located in Tiffin, Ohio. This item can be shipped worldwide.
  • Bundle Listing: No
  • MAKE: JEEP
  • MODEL: 2018 WRANGLER JL NEW BODY STYLE ONLY
  • YEAR: 2018
  • Manufacturer Part Number: 82215398AB
  • Placement on Vehicle: Rear
  • Brand: MOPAR
  • Fitment Type: Direct Replacement
  • Warranty: 2 Year

Rear body tail light wiring harness 69 Pontiac GTO 1969 coupe judge ram air

Rear body tail light wiring harness 69 Pontiac GTO 1969 coupe judge ram air

This is a new 69 rear body tail light wiring harness. This fits 1969 Pontiac GTO coupe only not convertible or lemans tempest (although we do have in other listings). (Photo may not be of actual item, but to give graphic representation). EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original GM blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 ram air I II 1 2 3 4 III IV V 5judge 326 350 389 400 428 455 muncie saginaw pontiac gto lemans tempest gp g/p grand prix firebird executive catalina ventura bonneville judge. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “Rear body tail light wiring harness 69 Pontiac GTO 1969 coupe judge ram air” is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Lighting & Lamps\Tail Lights”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.

New 1941 1942 1946 1947 Dodge Truck WC Headlight and Body Wiring Harness Repro

New 1941 1942 1946 1947 Dodge Truck WC Headlight and Body Wiring Harness Repro

New 1941 1942 1946 1947 Dodge Truck WC Headlight and Body Wiring Harness Repro

This is a NEW reproduction wiring harness for 1941 through 1947 Dodge 1/2 Ton WC series trucks. It powers the headlights and body. Please note that it does not connect to the dash or engine. This harness uses original style wires and connectors and is MADE IN THE USA! It comes with a color code chart for ease of installation. Replaces Mopar # 914396. Check out my other items. Be sure to add me to your favorites list. The item “New 1941 1942 1946 1947 Dodge Truck WC Headlight and Body Wiring Harness Repro” is in sale since Wednesday, May 31, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Lighting & Lamps\Other”. The seller is “fmmpar” and is located in Fairmount, Georgia. This item can be shipped worldwide.
  • Manufacturer Part Number: 914396
  • Placement on Vehicle: Front
  • Country/Region of Manufacture: United States

BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio

BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio

BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio

BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio

BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio

BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio

BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio

1989 F reg BMW E30 325i convertible body wiring loom, this has been removed correctly and no factory wires were cut to remove it. The car had’check control’, ABS and full electric windows/central locking. The car had a working Clifford alarm system which is in amongst the loom so you can remove this if necessary or use it – I did have to cut a few wires to get the Clifford ECU out of the car so these will need reconnecting if you want to keep the Clifford… The car also has some extra stereo wiring so this may need removing too. Call me on 07501 306792 to arrange a viewing or with any question’s. Lot’s of BMW spare’s available, feel free to ask if you need anything or why not take a look at my other listing’s. The item “BMW E30 325i Convertible body loom wiring harness fuse box chassis 320i cabrio” is in sale since Thursday, January 10, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Wiring Looms”. The seller is “bridge-motor-works” and is located in Bristol. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: BMW
  • Type: Wiring Harness

1968-70 Mopar-B Body Classic Update Wiring Harness Complete Kit 510634

1968-70 Mopar-B Body Classic Update Wiring Harness Complete Kit 510634

1968-70 Mopar B-Body Classic Update Kit For. Plymouth Road Runner 1968. Plymouth Road Runner 1969. Plymouth Road Runner 1970. Dodge Super Bee 1968. Dodge Super Bee 1969. Dodge Super Bee 1970. Per California Law (Prop 65) we are required to put the following warning on all our listings. Please verify that the description contains your specific vehicle. While eBays compatibility system does a good job, it sometimes lists sub-models that may or may not be compatible with the part being offered. We have a 70,000 square ware house; so chances are we do have your item in stock and ready to go. Sorry for any inconvenience. This excludes special order items and electrical items. Powered by SixBit’s eCommerce Solution. The item “1968-70 Mopar-B Body Classic Update Wiring Harness Complete Kit 510634″ is in sale since Wednesday, April 26, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “thepartsplaceinc” and is located in DeKalb, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bahamas, Viet nam.
  • Brand: The Parts Place Inc.
  • Manufacturer Part Number: 510634?
  • Other Part Number: 510634?
  • Quantity: 1

67-72 Ford Truck Classic Update Series Complete Body Interior Wiring Harness Kit

67-72 Ford Truck Classic Update Series Complete Body Interior Wiring Harness Kit

67-72 Ford Truck Classic Update Series Complete Body Interior Wiring Harness Kit

Classic Update Wiring Harness Kit. Brand New Reproduction Wiring Harness Kit. The “Classic Update” wiring kits are made for the restoration enthusiast who wants some modern amenities in their classic vehicle. These kits include everything you need to modernize your classic vehicle: Headlight, Dimmer, and Ignition Switches; Boots, Tubes, and Grommets; Relays, and Flashers; Original Connectors, Terminals, and Disconnects. These kits are specifically made for the listed application and are not a universal designed kit! Manufactured by American Auto Wire. These kits are recommended for MODIFIED original vehicles, not OEM restoration projects. A replacement headlight switch with internal 25-amp circuit breaker, adjustable length shaft, and custom knob. Standard turn signal flasher, hazard flasher, and horn relay mounted on harness. Fuse box designed to fit in original location with no mods to the firewall. All required hardware supplied. New ATO fuse panel allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all after market accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Many original switch connector bodies – an American Autowire exclusive feature. Steering column connectors can plug directly into most aftermarket steering columns or stock. 1967-72 Ford columns using the adapter and terminals included in the kit. Separate under dash courtesy lamp assemblies are also included for use along with your original dome/interior lighting feeds. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. Original terminals, lamp sockets, and connectors that will plug into the original cluster (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as DAKOTA DIGITAL, CLASSIC INSTRUMENTS, AUTOMETER, VDO, and others. Rear body harness assembly plugs into the main harness at the left kick panel location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes backup light lead wires and connectors along with stop and tail light lead wires and connectors. New tag lamp and fuel tank sender lead connection is also included. New floor dimmer switch is provided for ease of installation. Wire length and connection accommodate original floor mount dimmer switch. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, electric choke, and electric speedometer (if needed). A heavy gauge alternator feed and fusible link are also included for any typical high output 1 wire or internally regulated alternator. Connectors supplied for power and tach leads for GM style H. Distributors along with various oil and temp senders. A Ford Gen III series alternator adapter is available separately. Front lighting includes extra long leads that can be routed for stock or optional appearances. All head light, parking light, and directional light leads, along with a switched trigger wire for an electric fan relay (usually recommended with AC) are provided. Mating terminals and connectors are also provided for you to complete your custom installation. New ignition switch with indexed connector included. New windshield wiper switch with indexed connector and motor leads included which must be mated to your stock motor (mating connector and terminals included). New door jamb switch pigtails and switches are also included. Please note: Classic Update Kits do not support Ammeters. Fits the following models. 1967 – 1972 Ford Truck. T o Understand Why we have Pre-Sell Listings. The item “67-72 Ford Truck Classic Update Series Complete Body Interior Wiring Harness Kit” is in sale since Saturday, November 18, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “tamraz” and is located in Naperville, Illinois. This item can be shipped worldwide.
  • PRE-SELL ITEM: Most often made per order
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: 510368
  • Placement on Vehicle: Front
  • Brand: American Autowire
  • Warranty: 90 Day
  • California Prop 65 Warning: Per California Law (Prop 65) WARNING: This product can expose you to chemicals, including lead, which is known to the state of California to cause cancer, birth defects, or other reproductive harm. For more info see p65warnings.ca.gov/ Prop 65 is an approved initiative that addresses concerns about exposure to chemicals known to cause cancer, birth defects, or other reproductive harm. To comply with Prop 65, businesses are required to display a warning for listed chemicals unless exposure is low enough to pose no significant risk of cancer or is significantly below levels observed to cause birth defects or other reproductive harm. Tamraz has chosen to display the Prop 65 warning based on the possible presence of one or more listed chemicals, without evaluating the level of exposure

Rear body tail light trunk wiring harness 67 68 Chevy Camaro rally sport z/28 SS

Rear body tail light trunk wiring harness 67 68 Chevy Camaro rally sport z/28 SS

This is a new 1967 or 1968 Chevy Camaro rear body tail light wiring harness. This goes from the dash to the rear body panel. Do you have a 1967 or 1968? Do you have a rally sport Camaro? Do you have a coupe or convertible? If you have a coupe, do you have under dash courtesy lights? (Photo may not be of actual item, but to give graphic representation). EXACT REPRODUCTION WIRING HARNESS. Exact reproduction wiring harness made to factory specifications using the factory blueprints. Our wiring harnesses are correct in every detail. Wiring harnesses connect to different electrical components in various locations throughout the vehicle. Often cars have wiring harnesses that have been “hacked” up and are missing correct connectors to plug into factory components, have corrosion or deterioration damage. These are manufactrued to the original blueprint NOS specifications. In order to satisfy the most discriminating enthusiast/restorer, we offer these authentic reproduction wiring harnesses. These harnesses will provide the finishing touch for any original or restored vehicle. They are built using original GM blue prints, cut to the exact lengths to provide a tailored look, and contain the correct type and color wire as well as the correct terminals. For those of you concerned about having your car judged, our reproduction wiring harnesses will pass all judging standards. These harnesses are ready to use just “plug in and go”. These harnesses are for owners who want a properly restored concourse quality vehicle, for owners to want to update old existing wiring, or for those who want to add factory installed options. They will look, fit and perform exactly as original. If you dont see it listed just ask as we are always expanded our inventory for the highest in customer service. 60 61 62 63 64 65 66 67 68 69 70 71 72 1964 1965 1966 1967 1968 1969 1970 1971 1972 copo yenko nickey ss rs rs/ss super sport ls6 l37 ls5 ls7 l78 z/28 z-28 z28. Per California Law (Prop 65) we are required to put the following warning on all our listings. The item “Rear body tail light trunk wiring harness 67 68 Chevy Camaro rally sport z/28 SS” is in sale since Thursday, July 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Lighting & Lamps\Tail Lights”. The seller is “midwaymusclecar” and is located in La Grange, Illinois. This item can be shipped worldwide.

Incoming search terms:

  • original 67 camaro rear wiring harness