99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

METRA 99-3010S-LC AFTERMARKET DOUBLE OR SINGLE DIN RADIO INSTALL KIT FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO STRIPPED DOWN WITH JUST THE BASICS (RAP RETENTION & ACCESSORY POWER). This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. This Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. If you would like a complete set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING for this kit. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). AFTERMARKET RADIO INSTALLATION KIT. PAINTED SILVER TO MATCH FACTORY COLOR AND TEXTURE. TURBO2 RADIO INSTALL DASH KIT. DIN Head Unit Provision with Pocket. ISO DIN Head Unit Provision with Pocket. Double DIN Head Unit Provision. ISO Stacked Head Unit Provision. Stripped Down Version with just the Basics Retains R. P and Accessory Power. Comprehensive Instruction Manual, Including Step-By-Step Disassembly and Assembly. (1) 99-3010S Metra Radio Trim Panel. (1) ISO Trim Plate. (2) Double DIN Brackets. (1) Double DIN Trim Plate. (1) 20-Pin GM Harness. This ITEM ships FREE in the (48 States) Contiguous U. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro” is in sale since Wednesday, November 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam.
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Supported Radio Sizes: Double Din, 2 ISO Din Radios, ISO Din with Pocket
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Interchange Part Number: ISO Din Aftermarket Trim Plate & Wiring Harness
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!
  • Color: Painted Silver to Match Factory Color & Finish
  • Manufacturer Part Number: Metra 99-3010S-LC
  • Placement on Vehicle: Front
  • Other Part Number: 2-Din Installation Mounting Panel & Wire Interface
  • Brand: Metra 99-3010S-LC CD Player DVD Adapter Bezel

1970 1971 1972 1973 Camaro Wiring Harness Classic Update Kit SS

1970 1971 1972 1973 Camaro Wiring Harness Classic Update Kit SS

1970 1971 1972 1973 Camaro Wiring Harness Classic Update Kit SS

Manufactured in the USA by American Auto Wire. This wiring harness kit has everything to wire your Camaro front to rear. Most complete wiring harness kit on the market. Here are some details about the Classic Update Wiring Harness Kit. Replacement headlight switch with internal 30 amp circuit breaker included. Retention collar nut, adjustable length shaft, and custom knob are also included. Standard turn signal flasher, hazard flasher, and horn relay mounted on fuse panel. Fuse box designed to fit in original location. All required hardware supplied. New ATO fuse allows easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all aftermarket accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most aftermarket steering columns as well as 70-73 and later GM columns which utilize stock GM turn signal switches The original column can also be wired by using the supplied mating connector and terminals. Along with wiring for your original dome/interior lighting, we have included separate underdash light sockets. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. All original terminals, connectors (exclusively from American Autowire), and light sockets are also supplied for original cluster gauges. However, the best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, COVAN CLASSICS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly is designed to plug into the main harness in the original connector bodies. Flexibility in harness design allows for original or custom routing. Rear body wiring includes backup light wires and mating connectors for backup light leads. License plate lead, connectors, and terminals included. Fuel tank sender wire and terminal included. You will find all the original style light socket pigtails packed into every aspect of this system making it the most complete system of its type in the industry! New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch. Original bulkhead connector for the engine and front light wiring is included and ready for installation. Original routing of the new harness without any body modifications! Engine wiring includes connectors for original points type as well as H. Power and tach connectors supplied for GM H. Alternator connectors are supplied for GM SI series internally regulated alternators. GM CS series alternator adapter is available separately. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, and directional light connectors and terminals are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Color schematics and easy to understand installation instructions included. Be sure to add me to your favorites list! Thanks for visiting and hope to have your business. The item “1970 1971 1972 1973 Camaro Wiring Harness Classic Update Kit SS” is in sale since Sunday, March 21, 2010. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • California Prop 65 Warning: This product can expose you to a chemical known to the state of California to cause cancer or reproductive harm
  • Surface Finish: Wiring Harness
  • Manufacturer Part Number: 510034
  • Brand: AAW
  • Warranty: Yes

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS KIT

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS KIT

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS KIT

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS KIT

You will recieve both the engine and front light wiring harness. These wiring harness’s are made in the USA by American Auto Wire. These are for stock replacement of your brittle old wiring. Please indicate the Year, V-8 or 6 Cyl Engine and if your Camaro has Warning Lights or Factory Gauges. If you are using a HEI Ignition with a Modern Internal Regulated Alternator please see our other listing for these upgrades. We are an authorized. Dealer and can supply all your Camaro wiring needs. The item “1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS KIT” is in sale since Thursday, June 30, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Other”. The seller is “wellingtonclassics1″ and is located in Wellington, CO. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Part Brand: American Autowire
  • Brand: American Autowire
  • Manufacturer Part Number: CA85054

1982 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new

1982 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new

1982 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new

1982 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new

1982 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new

1982 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new

1982 – 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal Flasher Harness –> Yes Engine Harness –> Yes Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicle’s performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. 1982 – 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1982 1992 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse new” is in sale since Wednesday, June 5, 2019. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Charging & Starting Systems”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.
  • Brand: TOP END WIRING
  • Manufacturer Part Number: ZTP1709266
  • eBayMpn: ZTP1709266

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport

Hello, This listing is for one new 1968 Chevrolet Camaro RS Coupe/HT Rear Body Light Wiring Harness with under dash courtesy lights. This is the main wire harness for the rear of car. Connects under dash on driver side runs down driver side door sill to rear of rear. Has connections for the under dash connector, dome light lead, tail light sockets, back up light connectors, etc…. Has all the correct colors, connectors, lengths, clips, vinyl and cloth wrapping as original. Highest quality on the market. Made in the USA! Fits: 1968 Camaro RS Coupe/HT Rally Sport with under dash courtesy lights. Thanks and hope to have your business. The item “1968 Camaro Coupe RS Rear Body Tail Light Wiring Harness Rally Sport” is in sale since Friday, November 27, 2015. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Surface Finish: Wiring Harness
  • Manufacturer Part Number: CA80069
  • Placement on Vehicle: Rear
  • Brand: American Auto Wire
  • Non-Domestic Product: No
  • Warranty: Yes

Incoming search terms:

  • Midwaymusclecar@aol com

2014 2015 Chevrolet Camaro Fog Light Lamp Wiring Harness new OEM 23207193

2014 2015 Chevrolet Camaro Fog Light Lamp Wiring Harness new OEM 23207193

Fog Light Lamp Wiring Harness. If you are unsure if this is correct for your vehicle. Please send us the last 8 digits of your VIN. With it we will be able to determine for certain if it is applicable. We sell original Factory parts not aftermarket imitations. O riginal E quipment M anufactured parts are the same parts that came on your vehicle unlike aftermarket replicas. Parts are made of Thick High Quality Materials and will fit your vehicle perfectly. Trust in our factory trained Parts Countermen to insure you get the proper parts for your vehicles. We have more than 15 years of OEM parts experience. The item “2014 2015 Chevrolet Camaro Fog Light Lamp Wiring Harness new OEM 23207193″ is in sale since Tuesday, November 29, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Fog/Driving Lights”. The seller is “big-3-oem-auto-parts” and is located in Red Bud, Illinois. This item can be shipped worldwide.
  • Model: Camaro
  • Manufacturer Part Number: 23207193
  • Placement on Vehicle: Front
  • Brand: GM
  • Genuine OEM: Yes
  • Part Brand: Factory, OEM

1967 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block

1967 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block

1967 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block

1967 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block

1967 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block

1967 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block

1967 – 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block Fuses –> 15 Circuits –> 24 Prewired Terminals –> 118 Accessory Kit –> Yes Dimmer Switch –> NO Headlight Switch –> NO Ignition Switch –> NO Turn Signal Flasher Harness –> Yes Engine Harness –> Yes Prewired Harness –> Yes Labeled Wire –> Yes Color Coded –> Yes Fuse Cover –> Yes Built in Relay –> Yes Extra Wire –> Yes Feature –> Plug n Play Technology Feature –> High Quality KIC Wire This harness is not OEM and has been selected to be a suitable replacement for your vehicle. All wire is color-coded and labeled to make installation and future wiring easier. Top End Speed was founded on 3 principals. Weve worked hard to take care of our customers and treat you the way that we ourselves want to be treated, and that has led to much of our success and Top End Reputation! Over the years we have grown to become one of the industry leaders in Hot Rod, Street Rod, Muscle Car, Vintage Truck, Track & Strip Car, Pro Touring and even Late Model parts and accessories for just about anything you can think of to upgrade your vehicle’s performance. As we look towards the future, we are always researching & adding new technology and advanced products & services to our already loaded parts and accessories inventory! So keep us at the TOP of your list as your one stop performance parts & accessories shop and we will show you why we are at the TOP in the business by offering you TOP END products at the best prices with unmatched TOP END service. 1967 – 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1967 1969 Camaro or Firebird Wire Harness Upgrade Kit fits painless fuse block” is in sale since Saturday, April 20, 2019. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Charging & Starting Systems”. The seller is “topendspeed” and is located in Tampa, Florida. This item can be shipped worldwide.
  • Brand: TOP END WIRING
  • Manufacturer Part Number: ZTP-1709117
  • eBayMpn: ZTP-1709117

Chevrolet Camaro 2010-2015 2 DIN CAR STEREO INSTALL DASH KIT with WIRE HARNESS

Chevrolet Camaro 2010-2015 2 DIN CAR STEREO INSTALL DASH KIT with WIRE HARNESS

2 DIN CAR STEREO INSTALL DASH KIT w/ WIRE HARNESS. The large sweeping panel is designed with a factory look and painted silver to match the. Illuminated climate control display and soft touch buttons are designed to retain full functionality of the Camaros climate system. The kits control layout also retains heated seats hazard lights and lock and unlock controls. Includes navigation output wires (reverse parking brake vehicle speed sense). Works both amplified and non amplified systems. Retains OnStar warning chimes and audible turn signals. Retains factory installed Bluetooth. Retains balance and fade. UNIVERSAL CAR PANEL REMOVAL TOOL SET INCLUDED! The set of pry tool is used for safely removing and installing car audio, exterior and interior trim, dash, door panel. The tool could efficiently reduce the concave and protruding scars left by using the screw knife to remove. Slim curved tip can get into tight gap for removing interior light cover, dashboard panel, door panel and for LED lighting or stereo installation. You can refit car audio quickly and easily by using this product. Easily remove trim, molding, door panels and dashboards. Great for automotive snap on trim panel and molding removal. The tools are designed to universally fit any car model. Plastic tool construction prevents scratching and damaging vehicles paint, leather, chrome and other surfaces. Works on interior and exterior trim, wide edge remover, narrow edge remover, pull-type remover, handle remover and upholstery clip remover. Size: Length about 14.5cm/16cm/18.6cm/22.5cm. Tracking will be uploaded and Emailed to you. E bay return guidelines do apply. 2019-10-13 05:04:50. Came in awesome pack just what the picher is work grat and we will shop agen. 2019-10-13 02:46:20. Description correct came as described and on time. 2019-10-13 02:20:14. Good to deal with. 2019-10-13 02:16:26. 2019-10-13 02:16:11. 2019-10-13 01:35:25. 2019-10-13 01:34:44. Very pleased wry pleased. 2019-10-13 00:30:13. 2019-10-12 23:19:45. 2019-10-12 23:19:20. 2019-10-12 23:18:42. 2019-10-12 23:18:16. 2019-10-12 23:17:05. Received fast and was a great deal. 2019-10-12 23:03:00. Excellent quality coax cable… 2019-10-12 21:57:26. 2019-10-12 21:06:27. Made well will use for standard antenna setups. 2019-10-12 21:04:15. 2019-10-12 19:30:16. 2019-10-12 19:12:23. 2019-10-12 17:56:59. The item “Chevrolet Camaro 2010-2015 2 DIN CAR STEREO INSTALL DASH KIT with WIRE HARNESS” is in sale since Thursday, August 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “effinghamradiorepair” and is located in South Bend, Indiana. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation.
  • Brand: Metra
  • Other Part Number: RADIO DIN DASH KIT
  • Placement on Vehicle: Front
  • Surface Finish: silver
  • Manufacturer Part Number: 99-3010S eu55
  • Warranty: No Warranty
  • Bundle Listing: Yes

1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport

1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport

1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport

1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport

1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport

1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport

1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport

Hello, This listing is for one new 1968 Chevrolet Camaro Rally Sport Forward Light Wiring Harness RS V8 with Gauges. Harness has all the required connections for the forward light harness which I will list some. Bulk head connector, wiper motor, alternator, headlight lights, parking lights, horn relay, horns, voltage regulator etc…….. This wiring harness connects at the fire wall in bulkhead connector on the fuse box. Has the correct colors, connectors, lengths, clips, vinyl and cloth wrapping as original. Highest quality on the market. Made in the USA! Fits: 1968 Camaro RS All V8′s 307 327 350 396 with gauges. Thanks and hope to have your business. The item “1968 Camaro RS Forward Front Light Wiring Harness with Gauges V8 Rally Sport” is in sale since Thursday, November 26, 2015. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “24kaccents” and is located in Niagara Falls, New York. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Surface Finish: Wiring Harness
  • Manufacturer Part Number: CA85101
  • Brand: American Auto Wire
  • Warranty: Yes

Rear Lamp Wiring Harness 69 Camaro Rally Sport Made in USA tail light loom RS

Rear Lamp Wiring Harness 69 Camaro Rally Sport Made in USA tail light loom RS

Rear Lamp Wiring Harness 69 Camaro Rally Sport Made in USA tail light loom RS

Brand New Rear Lamp Wiring Harness for 1969 Camaro Rally Sport, with the back up lamps below the bumper. (Not correct for the standard rear backup lamps) This wiring is a correct reproduction including factory replacement plugs, connectors, sockets and clips. Made in the USA! You can also pick it up at our Warrenville warehouse. As per updated California Law (Prop 65) they ask sellers to put the following warning on listings. The item “Rear Lamp Wiring Harness 69 Camaro Rally Sport Made in USA tail light loom RS” is in sale since Saturday, March 11, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Lighting & Lamps\Other”. The seller is “drclassicauto” and is located in Warrenville, Illinois. This item can be shipped worldwide.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: wire loom light tail taillamp taillight backup
  • Manufacturer Part Number: WR14350
  • Other Part Number: back up license plate socket
  • Brand: D&R Classic Automotive