03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 03 -’07 Vortec Drive by Wire Standalone Wiring Harness. Application’03 -’07 Chevy, GMC, Cadillac, and Hummer Vortec Engines with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’03 -’07 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Note: If using an LS style car intake with EV1 fuel injectors please order HAR-1017. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 03 -’07 Vortec Engines require’03 -’07 Vortec (Blue & Green) PCM (Service Number 12586242), contact. Harness is designed to use Multec fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. Vortec Drive by Wire harnesses require 8 pin Throttle Body (GM P/N 12570800 or equivalent) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “03-07 VORTEC PSI STANDALONE WIRING HARNESS WithT56 DRIVE BY WIRE DBW 4.8 5.3 6.0″ is in sale since Saturday, April 14, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1015
  • Warranty: Yes
  • Part Brand: PSI

1947-59 Chevy Pickup Truck Wiper Kit w Wiring Harness cable drive hood hot rod

1947-59 Chevy Pickup Truck Wiper Kit w Wiring Harness cable drive hood hot rod

1947-59 Chevy Pickup Truck Wiper Kit w Wiring Harness cable drive hood hot rod

1947-59 Chevy Pickup Truck Wiper Kit w Wiring Harness cable drive hood hot rod

1947-59 Chevy Pickup Truck Wiper Kit w Wiring Harness cable drive hood hot rod

1947-59 Chevy Pickup Truck Wiper Kit w Wiring Harness cable drive hood hot rod

Feature :: 2 Speed Operation Feature :: Universal Design Feature :: Self Park Feature Feature :: Adjustable Coverage Feature :: Adjustable Rest Position Feature :: Heavy Duty Motor Feature :: Plug In Harness Feature :: Great for Hot Rods! For almost 40 years, Steves House Of Speed has been satisfying customers’ needs by providing them with the parts they need at the lowest prices. We house the most comprehensive collection of parts and accessories in the world. If your parts-shopping experience is a hit-or-miss or simply unsatisfactory, switch over to us. You won’t regret it! We offer the Right Part and the Perfect Fit!!! Other auto parts stores carry only a couple of thousand parts in stock. Sometimes, it can get very frustrating when you spend time, sweat, and gas only to be told that they don’t have what you need. Well, you’ll never experience that here at Steves House Of Speed! Our huge warehouse has over 1 million parts for over 25 million different vehicles. Add to that more than 100,000 accessories for over 6 million rides and what you get is the right part with the perfect fit. No more frustration, no more stalled restoration projects, no more having to wait to get back on the road! You’ll find what you want right here. We stock products that are just as good (or better) than those your ride came with. If you need your parts fast, then you’ll feel right at home here with Steves House Of Speed. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1947-59 Chevy Pickup Truck Wiper Kit w Wiring Harness cable drive hood hot rod” is in sale since Thursday, October 19, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Glass”. The seller is “steveshouseospeed” and is located in Patterson, New York. This item can be shipped worldwide.
  • Brand: Autoloc
  • Manufacturer Part Number: PLL172280

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 08 -’15 LS3 (6.2L) Drive by Wire Standalone Wiring Harness. Application’08 -’15 LS3 (6.2L) Engines with Electronic Throttle Body and T56, Manual, or Non-Electronic Transmissions (TH400, TH350, Powerglide) (Gray 58X Crank Reluctor Only). Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for 2008 – 2015 LS3 engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. Gen IV Engines require ” E38 ” ECM, contact. Harness is designed to use EV6 fuel injectors, and 58x Crank Sensor. Gen IV Drive by Wire harnesses are designed to use Corvette 6 Pin Accelerator Pedal , available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, 6L80E , 6L90E Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “2008-2015 LS3 (6.2L) PSI STANDALONE WIRING HARNESS WithT56 58X DRIVE BY WIRE DBW” is in sale since Monday, April 16, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Part Brand: PSI
  • Manufacturer Part Number: HAR-1037
  • Warranty: Yes

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6

Nick Williams Performance drive-by-wire throttle bodies are CNC precision-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX performance engines. The 102mm throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installedno need to disassemble your factory throttle body. Designed for LSXr intake manifolds with drive-by-wire throttle bodies only. The item “Nick Williams LSXr 102mm Drive By Wire Throttle Body with Adapter Harness LS1/LS6″ is in sale since Friday, January 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Throttle Body”. The seller is “hawksmotorsports” and is located in Easley, South Carolina. This item can be shipped worldwide.
  • Brand: Nick Williams
  • Manufacturer Part Number: SD102MMEL
  • Other Part Number: 108115

Incoming search terms:

  • new genuien Nick williams thorttlebody 102mm ebay

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 97 -’04 LS1/LS6 Drive by Wire Standalone Wiring Harness. With T56 or Non-Electronic Transmission. Application’97 -’04 Corvette / CTS-V LS1/LS6 Engines with Electronic Throttle Body and T56, TH400, Th350, 700R4, 200-4R or any Manual Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’97 -’04 LS1/LS6 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 97 -’98 LS1 Engines require’99 -’04 LS1 PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use EV1 fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. LS1/LS6 Drive by Wire harnesses require Corvette, Z06, CTS-V Throttle Body (GM P/N 17113669) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, 5 wire MAF, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS WithT56 (DRIVE BY WIRE) DBW” is in sale since Friday, March 02, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Toms River, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1017
  • Warranty: Yes
  • Part Brand: PSI

Ls Throttle Body Drive By Wire Vs Drive By Cable

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)

1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 97 -’04 LS1/LS6 Drive by Wire Standalone Wiring Harness. Application’97 -’04 Corvette / CTS-V LS1/LS6 Engines with Electronic Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, 7 ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Cruise Control Wiring, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’97 -’04 LS1/LS6 retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 97 -’98 LS1 Engines require’99 -’04 LS1 PCM (Service Number 9354896 or 12200411), contact. Harness is designed to use EV1 fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. LS1/LS6 Drive by Wire harnesses require Corvette, Z06, CTS-V Throttle Body (GM P/N 17113669) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, 5 wire MAF, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “1997-2004 LS1/LS6 PSI STANDALONE WIRING HARNESS With4L60E (DRIVE BY WIRE)” is in sale since Friday, March 02, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Toms River, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: HAR-1016
  • Warranty: Yes
  • Part Brand: PSI

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0

HIGH QUALITY, ECONOMICAL, COMPLETE STANDALONE WIRING HARNESSES. EASY TO INSTALL 4 WIRE CONNECTION! 03 -’07 Vortec Drive by Wire Standalone Wiring Harness. Application’03 -’07 Chevy, GMC, Cadillac, and Hummer Vortec Engines with Electronic Throttle Body and 4L60E Transmissions. Parts Included Complete Engine and Transmission Wiring Harness including all engine and transmission sensor connectors, ALDL Connector, ATO Style Fuse Block, Fuel Pump Relay, Switched Power Ignition Relay, Performance Shift Mode Wiring, MIL Light Wiring, P/N Wiring, TCC/Switch Wiring, Tach Wiring, Complete Detailed Instructions. Description These harnesses are designed for’03 -’07 Vortec engine retrofits into older muscle cars and street rods or newer non-emissions controlled vehicles. This harness allows use of the factory Vortec intake manifold and Multec injectors. They are completely plug and play with switched power, constant power and ground connections required. Harnesses allow for installing the PCM underneath the dash of your vehicle with a sliding grommet seal for that professional leak proof look. Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. Note that harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions. All harnesses require PCM VATs removal, available through PSI. Note: If using an LS style car intake with EV1 fuel injectors please order HAR-1016. Performance Systems Integration PSI. LT1/LT4 , LS1/LS6 , VORTEC 4.8/5.3/6.0/6. 2 , LS2 , LS3 , LS7 HARNESSES OR THE REST OF THE PARTS TO COMPLETE YOUR SWAP. All harnesses are made with pride in the U. All harnesses require PCM VATs removal, available through. 03 -’07 Vortec Engines require’03 -’07 Vortec (Blue & Green) PCM (Service Number 12586242), contact. Harness is designed to use Multec fuel injectors, 5 wire MAF sensor, and 24x Crank Sensor. Vortec Drive by Wire harnesses require 8 pin Throttle Body (GM P/N 12570800 or equivalent) Contact. For throttle body adapter for DBC, 90mm, LS2 etc. Drive by Wire harnesses require mating Pedal and TAC module, and Tac Module Harness, available through. Harnesses are available for 4L60E electronic automatic, 4L80E electronic automatic, Manual, and Non-electronic automatic transmissions. Harnesses are available for LS1/LS6, LS2/3/7, and 4.8/5.3/6.0/6.2 Vortec Engines. For harness modification including 4L80E transmission, Throttle Body, or Fuel Injector Modifications. Occasionally your order will be split if all items are not in-stock. Providing a contact telephone number at checkout makes it easier to reach you should there be any questions regarding your order. Has over 25 years of EFI experience, we specialize in LT1 and LSX Conversion Harnesses. Has a growing reputation for outstanding customer service. Our Customer Service department can be reached 24 hours a day, 7 days a week. Most emails are answered within 24 hours, not including weekends or holidays. Harnesses are built with the highest regard to quality control and all products are 100% quality inspected. Before contacting us, please double check all connections and perform normal basic trouble shooting fuel pressure, timing, ignition system, etc. Are warranted to the original purchaser to be free from defects in material and workmanship under normal use. ELECTRICAL, SENSOR, OPTI, SPARK, DISTRIBUTOR, EFI, REPAIR, MOTOR, VALVE, PAINLESS. The free listing tool. The item “03-07 VORTEC PSI STANDALONE WIRING HARNESS With4L60E DRIVE BY WIRE DBW 4.8 5.3 6.0″ is in sale since Saturday, April 14, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “psiconversion” and is located in Lakewood, New Jersey. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand.
  • Manufacturer Part Number: HAR-1014
  • Warranty: Yes
  • Part Brand: PSI

Ls3 (6.2l) Speartech Standalone Wiring Harness 58x Drive By Wire Manual Trans

Ls3 (6.2l) Speartech Standalone Wiring Harness 58x Drive By Wire Manual Trans

Ls3 (6.2l) Speartech Standalone Wiring Harness 58x Drive By Wire Manual Trans

Acquired with a project car, but never used. Speartech standalone wiring harness with labeled connectors and hook-up wires. The item “LS3 (6.2L) SPEARTECH STANDALONE WIRING HARNESS 58X DRIVE BY WIRE MANUAL TRANS” is in sale since Thursday, March 23, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “2015usreimc” and is located in Carson City, Nevada. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: N/A
  • Part Brand: SPEARTECH