BMW E30 wiring harness Adapter Install/Swap engine M50 M52 S50 S52 from E36/E34

BMW E30 wiring harness Adapter Install/Swap engine M50 M52 S50 S52 from E36/E34

BMW E30 wiring harness Adapter Install/Swap engine M50 M52 S50 S52 from E36/E34

BMW E30 wiring harness Adapter Install/Swap engine M50 M52 S50 S52 from E36/E34

BMW E30 wiring harness Adapter to Install/Swap engine M50/S50 from E36/E34. This wiring harness was developed to allow you to install / swap an E36 engine into a E30 car. The BMW E30 wiring has a 20 pin plug at the engine bay, while the E36 uses a 25 pin plug at the engine bay. With our adaptor cable you only need to connect it between the 20 pin and 25 pin connectors. This adapter was developed and tested to the following engines M50, M52, S50, S52 from E36 or E34. If your BMW E30 is before 7/1987 you must add 2 cables to the wiring harness with 2 single pins included. For the installation, you will have a guide to help and explain you what to do. We Speak English, Portuguese, French and German. Most items will be sent within 24 hours. Please check out our feedback! VAT invoice: all our items include a VAT invoice supplied with the goods. Please tell us your VAT number for correct invoice. The item “BMW E30 wiring harness Adapter Install/Swap engine M50 M52 S50 S52 from E36/E34″ is in sale since Wednesday, August 02, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning”. The seller is “bruno_steering” and is located in Leiria. This item can be shipped worldwide.
  • Brand: Unbranded
  • Manufacturer Part Number: BLA010

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine

CXRacing’s LQ9 Ignition Coil. Bracket + Wire Harness Kit For Toyota 2JZ-GTE Engine. LQ9 Ignition Coil Pack Upgrade Kit, Supports Bigger Power for 2JZ Comes with LQ9 Ignition Coils, Aluminum Bracket, with Spacer, and Wire Harness Heat-Shrink Wrapped with Protection Shield Harness, Two Ground Wires. This is CXRacing’s Newest Product for The Application Stated. All Products Are Developed from The Ground up in Our R&D Center Based in The USA. Our Parts Are Designed and Built for Improved Performance Gains, with Excellent Fitment and Ease of Installation. This Listing is for the Wire Harness Brackets and Ignition Coils ONLY, All Other Parts Shown are NOT INCLUDED. PR, Guam, VI, AK, APO, HI. CXRacing does NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition Any Modifications to your vehicle Are AT YOUR OWN RISK. CXRacing shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. CXRacing shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of serv ices, los s of business, loss or damage to exemplary damages, whether or not CXRacing is apprised of the possibility of such claims of damage. The item “CXR LQ9 Ignition Coil Packs Bracket Wire Harness Kit For 2JZ-GTE 2JZGTE Engine” is in sale since Monday, June 19, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “cxracing” and is located in Hacienda Heights, California. This item can be shipped worldwide.
  • Brand: CXRacing
  • Manufacturer Part Number: 1097207006439

New Oem Main Engine Wiring Harness Ford Excursion F250 F350 F450 F550 Sd 7.3l

New Oem Main Engine Wiring Harness Ford Excursion F250 F350 F450 F550 Sd 7.3l

New Oem Main Engine Wiring Harness Ford Excursion F250 F350 F450 F550 Sd 7.3l

New Oem Main Engine Wiring Harness Ford Excursion F250 F350 F450 F550 Sd 7.3l

New Oem Main Engine Wiring Harness Ford Excursion F250 F350 F450 F550 Sd 7.3l

New Oem Main Engine Wiring Harness Ford Excursion F250 F350 F450 F550 Sd 7.3l

SPECIALS & SALE ITEMS. Air Conditioning & Heat. Charging & Starting System. Computer, Chip, Cruise Control. Gauges & Related Parts. Traxxas RC Cars & Accessories. Wheels, Tires & Parts. NEW OEM MAIN ENGINE WIRING HARNESS FORD EXCURSION F250 F350 F450 F550 SD 7.3L. # Identified in Schematic (If applicable). Brand New OEM Main Engine Wiring Harness that is a direct factory replacement for the vehicles listed in the fitment guide below. These charges are the buyers responsibility. Need to return an item? Just follow the easy return procedure as outlined on this page. Get Your Return Authorization (RA) # & Form. Return Your Items in Original Packaging. Fill out the Return Authorization (RA) form and include it along with the item(s) you want to return in the original, unmarked, and undamaged packaging. Tasca Automotive Group 1300 Pontiac Ave. The Tasca Family has been in the automotive industry for over 65 years. In fact, he wrote the book, “You Will Be Satisfied” based on his passion for satisfying the customer. Over his many years, he has developed a business of best in class sales and service. Tasca Automotive Group has won every Ford Motor Company award dating back to 1958, including 10 Chairman’s Awards, President’s Awards, and most recently in 2010, Ford’s highest award, the Triple Crown. The Tasca Family has also led the nation in both Ford and Lincoln Mercury sales during our history. Currently, the Tasca Automotive Group dealerships are being run by the second and third generations. We all started learning the business from the ground up. There is always a member of the Tasca family to meet with a customer. We are proud to be carrying on our family’s tradition that, You Will Be Satisfied. The item “NEW OEM MAIN ENGINE WIRING HARNESS FORD EXCURSION F250 F350 F450 F550 SD 7.3L” is in sale since Saturday, August 26, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Other”. The seller is “tasca_tpc” and is located in Cranston, Rhode Island. This item can be shipped worldwide.
  • Brand: Ford
  • Manufacturer Part Number: F81Z12B637FA
  • Fitment Type: Direct Replacement
  • Genuine OEM: Yes
  • Part Brand: Ford
  • Placement on Vehicle: Front

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application

Looking for the best in aesthetics, weight savings and reliability out of your harness? Our Pro Series harness completely replaces your old OEM harness so you can forget about those electrical gremlins. This Wiring Specialties PRO Series harness was designed from the ground-up to exceed OEM specifications for wire quality, power/ground routing. With our optimized and’tucked’ approach the end result will be a clean and worry free installation with a guaranteed start up. This harness is specifically engineered for. Race / Track cars, cars running a stripped interior / switch panel, or classic pre-EFI cars. With the 2JZGTE VVTi engine swap. It was developed in house on an actual 2JZGTE VVTi engine to ensure a perfect fit to all engine connections. Wiring Specialties offers a number of options for common performance upgrades for this product. Build your perfect harness by selecting from the available options to the right, and as always – if you have any questions, please reach out to us. ENGINE: JZS161 and JZA80 2JZGTE VVTi. Oval Alternator, New Style Starter, and Plastic Coolant & Oil pressure connector supplied by default. If you need different connectors for these please leave a Note / Comment when checking out. Standard VVTi batched ignition (chip and coils) are supplied, but sequential NON VVTi ignition is available as an option. For GM/LQ9 coils upgrade should be used with an aftermarket ECU and run sequentially. OEM ECUs require IGF signal produced by the ignition chip. When the chip is removed for LQ9 coil installation, an aftermarket ECU or IGF simulator box is required. Race / Track cars, Cars running a stripped interior / switch panel, Classic & Pre-EFI cars, sand rails, dune buggies. Our Universal PRO harnesses are a perfect solution for the engine, and can come with an optional self-contained pre-wired fuse/relay block for ignition, cooling fans and fuel pump. If you plan on using your own relays and a switch panel, you do not need the fuse block. You just have to hook up start signal, fuel pump wires and a few other wires for tach and speedo, alternator warning light etc. Speedo and / or tach may need to have the signal adjusted using a frequency modulator (see Options to the right). You may have to run aftermarket gauges. Not compatible with mechanical cable driven speedometers. PRO-SERIES HARNESS TECHNICAL SPECS. Plug and Play simple and efficient. NO CORE HARNESS or additional wiring required. OEM wire colors used, where applicable. All sensor signal connection use EM shielded wires. Fireproof fiberglass sleeving used in high-temp sections near the manifold & turbo (-40°C/-40°F to +450°C/+845°F operating temperature). Point-to-Point continuity tested on every wire. Constructed using exact OEM connectors and seals. Made with high temp TXL wire with adhesive shrink tubing (-40°C/-40°F to +125°C/+257°F operating temperature). Wrapped in lightweight nylon loom (-94°C/-137°F to +125°C/+257°F operating temperature). Includes a charge harness and improved grounds. Fully tested after production for an easy plug-and-play installation. Main Engine and Transmission one-piece tucked harness. 2x Knock sensor connectors. Boost solenoid wiring (with AEM/Haltech or aftermarket computers). 10-pin igniter chip connector (relocated to inside the car). 2x CAM sensor connector. Idle air motor connector. OEM Oxygen sensor connectors (wideband wiring is not part of the EFI harness, except AEM Infinity 6/8). 2 x Ground ring terminal. ECT sensor connector and cluster coolant temp switch connector. Reverse lights sensor connector. OEM oil pressure 1-pin connector. Speed and Tach signal converter connector. ECU Diagnostics mode connector. No traction Control wiring supplied. Printable install instructions with pictures. Turn Key ENGINE START Guarantee. If you are running an aftermarket ECU, we can customize your PRO harness to fit your exact build requirements. To download and submit the ECU / Build details form with your order, or we will contact you once the order is placed to collect the needed details. AEM Infinity, Link and ECU Masters products (and some other standalone ECUs) are able to process a wideband signal input wired DIRECTLY to the ECU. The LSU 4.2 Version of the WB O2 Sensor SHOULD be used, as per AEM and ECU Masters. Select the Oval or Rectangular connector style in the options to match your WB O2 connector. All ECUs that are unable to process a wideband signal directly, will be wired for a FACTORY O2 sensor and a labeled flying lead will be provided to connect the ECU to the Wideband controller. For ECUs that do not process a raw wideband signal, a controller must be used. Controllers like an AEM UEGO Gauge Kit or the Haltech CAN wideband unit should be used. AEM Infinity, Motec, Link and ECU Masters harnesses are pre-wired for Oil Pressure, Fuel pressure, Oil Temp, IAT and MAP sensor wiring directly to the ECU. Flex Fuel support is available if desired. ECU control of a Boost Control Solenoid is also available on most harnesses. Apexi PFC conversions ONLY include the IAT sensor in the main harness. The MAP sensor is wired separately, from the PFC box directly to the sensor. FAQ & OTHER DETAILS. Alternator Charge Cable – This item ties the starter/battery directly to the Alternator output, which allows the improved power routing on our harness to eliminate the wire running from the alternator to the fusebox and/or battery while still charging the battery normally. ECU Patch Harness – This optional item eliminates the need to cut into your engine harness for accessories. Use the length of wire provided between the wiring harness plug and the ECU itself to install accessories such as air-fuel meters & controllers, electric boost controllers, rev/speed meters and more. Grounding Kit – Our Kit ties a number if engine components to the body of the car and ensures that you will not have issues resulting from poor grounds. The Grounding Kit utilizes Ultra High temp fiberglass sleeving to allow installation under or around exhaust components. Very flexible mounting options allow you to connect the block, head, battery tray, alternator case and chassis to completely eliminate all grounding issues. Speedo / Tach Signal Conditioning – The Dakota Digital SGI-5 unit for Speed and the SGI-8 unit for Tach can’condition’ the signal to compensate for cross-platform swaps and/or changes to the number of cylinders. If the Option exists to ADD either unit on the harness page for your swap, then you need them for proper speedo & tach operation. Please note that some transmissions (350z, BMW ZF and S15 Silvia for example) do not have a speed sensor and will require a non-harness based solution like a GPS speedo. Most Nissan to Nissan swaps can simply adjust the tachometer to compensate. Plug-n-Play vs Universal – Plug-n-Play harnesses connect to your car’s underhood fuse box for power and to connectors under the dash for gauges etc. Universal harnesses do not need an underhood fusebox to connect to and the wiring for gauges and warning lights is provided as a’flying lead’ which are bare wires labeled with their function. Right Hand Drive (RHD) Conversions – If you used ALL the stock LHD chassis connectors for your RHD swap, order the LHD version of the harness. If you used ALL the clip/swap RHD chassis connectors, order the RHD version of the harness. Don’t See It? Chances are we can do it! Battery Cables / Battery Relocation – The battery must be connected to the starter, so you need a battery cable from the positive battery terminal to the starter main power lug. Typically this positive battery cable also powers up the main under hood fusebox, which runs many of the non-engine items on your car like interior lights, dash power and headlights/taillights. Please make sure you have prepared for this as each install is different. LS2/LQ9 GM V8 Coil Pack Conversions – We offer an upgrade to the GM V8 LS2/LQ9 Smart Coils on most of our harnesses. This will eliminate the ignitor chip completely (when present), and allow you to use the high performance LS2/LQ9 Coil Packs which are easy to find. Install on JZ or RB engines keeps the coilpacks in their original location over the spark plug with the use of a mounting kit from MOJO Performance. The kits include brackets, mounting hardware, rubber boots and contact springs and can be added to your order by selecting them from the Options list to the right. NOTE: OEM Toyota JZ ECUs require an IGF signal produced by the ignitor chip. When the chip is removed for LS2/LQ9 coil upgrade, an aftermarket ECU or IGF simulator box is required (not included with our harness), and the coils will be fired sequentially. The item “Wiring Specialties Engine Tranny Harness 2JZGTE VVTI into Universal Application” is in sale since Friday, February 27, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Charging & Starting Systems\Other”. The seller is “autocat51″ and is located in West Covina, California. This item can be shipped worldwide.
  • Manufacturer Part Number: WRS-PRO2JVVTI-UNI
  • Brand: WSP

EK D16Y8 96 97 98 HONDA CIVIC EX 5 spd ENGINE WIRING HARNESS VTEC wire manual

EK D16Y8 96 97 98 HONDA CIVIC EX 5 spd ENGINE WIRING HARNESS VTEC wire manual

EK D16Y8 96 97 98 HONDA CIVIC EX 5 spd ENGINE WIRING HARNESS VTEC wire manual

EK D16Y8 96 97 98 HONDA CIVIC EX 5 spd ENGINE WIRING HARNESS VTEC wire manual

EK D16Y8 96 97 98 HONDA CIVIC EX 5 spd ENGINE WIRING HARNESS VTEC wire manual

EK D16Y8 96 97 98 HONDA CIVIC EX 5 spd ENGINE WIRING HARNESS VTEC wire manual

This will fit perfectly with your civic 96 to 98…. This came form a stick shift 5 speed D16Y8 engine swap that came in a civic year model 97 Ex manual transmission. It can also be a great choice for those of you with a civic 96 to 98 that are looking to convert over to B series Vtec or non Vtec. This item has zero damage. I installed a JDM B20 year 2000 engine block with a Gsr head. For the B series Vtec swap, you need to stretch the Vtec plug and the Vtec oil pressure switch plug just a bit, based on the Bseries Vtec solenoid location on the head versus the Vtec solenoid location on the single can Vtec type heads. I have had it this way for over 2 years and I have had no problems. Professional installation is always recommended. Since I commute all around Southern California on a weekly basis, there is strong possibilities that we can meet close to your home or half way. I encourage you to contact me ahead of time so that we can make arrangements. Pacific standard time then your chances of having your product go out on the same day are very strong. Feel free to look at my feedback…. I try to make my customers very happy. I can not be held responsible for mistakes made on your end. The item “EK D16Y8 96 97 98 HONDA CIVIC EX 5 spd ENGINE WIRING HARNESS VTEC wire manual” is in sale since Friday, January 27, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car Electronics\Other Car Audio\Other”. The seller is “si_honda” and is located in Simi Valley, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia.

Hybrid Racing K-Swap Engine Conversion Wiring Harness (99-00 Honda Civic) EK K20

Hybrid Racing K-Swap Engine Conversion Wiring Harness (99-00 Honda Civic) EK K20

Hybrid Racing K-Swap Engine Conversion Wiring Harness (99-00 Honda Civic) EK K20

Hybrid Racing K-Swap Engine Conversion Wiring Harness (99-00 Honda Civic) EK K20

Hybrid Racing completed their first K-swap over five years ago and pioneered a lot of the products that you currently see on K swapped vehicles. One of those products is the conversion harness. This harness interfaces with the factory dash harness, your OEM K series engine harness and your K series ECU to greatly simplify the swap wiring. What’s new about the Version 3 Hybrid Racing Harness? The new Hybrid Racing Conversion harness incorporates updated wiring to make for an even easier install, updated install guide that includes more pictures and less text and the integration of the oxygen sensor connector making it super easy to install. No more fumbling with your stock O2 sensor connector and cutting and connecting etc. What type of connectors and pins do you use? When we construct a Hybrid Racing harness we utilize brand new connectors and pins sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that your getting all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. The item “Hybrid Racing K-Swap Engine Conversion Wiring Harness (99-00 Honda Civic) EK K20″ is in sale since Tuesday, August 23, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “aftermarket_parts” and is located in New Braunfels, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Hybrid Racing
  • Manufacturer Part Number: HYB-CWH-01-19

New Oem Main Engine Wiring Harness 2005-2006 Ford F250 F350 F450 F550 Sd 5.4l

New Oem Main Engine Wiring Harness 2005-2006 Ford F250 F350 F450 F550 Sd 5.4l

New Oem Main Engine Wiring Harness 2005-2006 Ford F250 F350 F450 F550 Sd 5.4l

New Oem Main Engine Wiring Harness 2005-2006 Ford F250 F350 F450 F550 Sd 5.4l

New Oem Main Engine Wiring Harness 2005-2006 Ford F250 F350 F450 F550 Sd 5.4l

New Oem Main Engine Wiring Harness 2005-2006 Ford F250 F350 F450 F550 Sd 5.4l

SPECIALS & SALE ITEMS. Air Conditioning & Heat. Charging & Starting System. Computer, Chip, Cruise Control. Gauges & Related Parts. Traxxas RC Cars & Accessories. Wheels, Tires & Parts. # Identified in Schematic (If applicable). Brand New OEM Main Engine Wiring Harness that is a direct factory replacement for the vehicles listed in the fitment guide below. These charges are the buyers responsibility. Need to return an item? Just follow the easy return procedure as outlined on this page. Get Your Return Authorization (RA) # & Form. Return Your Items in Original Packaging. Fill out the Return Authorization (RA) form and include it along with the item(s) you want to return in the original, unmarked, and undamaged packaging. Tasca Automotive Group 1300 Pontiac Ave. The Tasca Family has been in the automotive industry for over 65 years. In fact, he wrote the book, “You Will Be Satisfied” based on his passion for satisfying the customer. Over his many years, he has developed a business of best in class sales and service. Tasca Automotive Group has won every Ford Motor Company award dating back to 1958, including 10 Chairman’s Awards, President’s Awards, and most recently in 2010, Ford’s highest award, the Triple Crown. The Tasca Family has also led the nation in both Ford and Lincoln Mercury sales during our history. Currently, the Tasca Automotive Group dealerships are being run by the second and third generations. We all started learning the business from the ground up. There is always a member of the Tasca family to meet with a customer. We are proud to be carrying on our family’s tradition that, You Will Be Satisfied. The item “NEW OEM MAIN ENGINE WIRING HARNESS 2005-2006 FORD F250 F350 F450 F550 SD 5.4L” is in sale since Friday, October 21, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “tasca_tpc” and is located in Cranston, Rhode Island. This item can be shipped worldwide.
  • Brand: Ford
  • Manufacturer Part Number: 5C3Z9D930AA
  • Fitment Type: Direct Replacement
  • Genuine OEM: Yes
  • Part Brand: Ford
  • Placement on Vehicle: Front

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS HEI IGNITION KIT

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS HEI IGNITION KIT

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS HEI IGNITION KIT

1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS HEI IGNITION KIT

These harness’s are made for an HEI Ignition and a Internal Regulated Alternator. You will recieve both the Engine and Front Light wiring harness. These wiring harness’s are made in the USA by American Auto Wire. Please indicate the Year, V-8 or 6 Cyl Engine and if your Camaro has Warning Lights or Factory Gauges. We will also need to know if your Alternator is mounted on the Drivers or Passenger Side of the Engine Compartment. Will not work with the 1967 Rally Sport, please see our other listing if you have the 1967 Rally Sport Camaro. We are an authorized. Dealer and can supply all your Camaro wiring needs. The item “1967 1968 1969 CAMARO ENGINE and FRONT LIGHT WIRING HARNESS HEI IGNITION KIT” is in sale since Friday, October 11, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Lighting & Lamps\Other”. The seller is “wellingtonclassics1″ and is located in Wellington, CO. This item can be shipped worldwide.
  • Brand: American Autowire
  • Country/Region of Manufacture: United States
  • Part Brand: American Autowire
  • Manufacturer Part Number: CA85265H

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD

03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD. This is a brand new OEM Genuine Ford Parts engine wiring harness assembly. For all 2003 & 2004 Ford Super Duty with the 6.0L Diesel Engine with BUILD DATE of 1/30/03 thru 9/29/03 ONLY. Fairway, It’s Not Just A Name. That’s The Way We Do Business! Please keep this in mind when attempting to contact me. This is a new OEM Genuine Ford Brand Factory Part designed, engineered, and built specifically for your Ford. Ford has made every effort that their Genuine Parts are top quality in terms of fit, finish and ease of installation! We Go The Extra Mile For Our Customers! The item “03-04 Super Duty OEM Ford Engine Wiring Harness 6.0L 1/30/03 thru 9/29/03 BUILD” is in sale since Thursday, September 07, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other”. The seller is “fairfome” and is located in Canfield, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Ford Motor Company
  • Manufacturer Part Number: 3C3Z-12B637-BA
  • Warranty: 2 Year
  • Fitment Type: Direct Replacement
  • UPC: Does Not Apply

Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Summit Racing Part Number. Please hover mouse to enlarge image. Painless Performance Fuel Injection Harness 60101. Designed for engine swap vehicles equipped with 1982-93 TBI from a 5.7L or 5.0L throttle body injection. Painless Wiring 60124 Harness Distributor to Coil. Painless Wiring 60125 Harness Distributor to Tachometer. Lease see the “Compatibility” link at the top of the listing. Fitment information may not be available for all products and those without fitment will not have a Compatibility link. Please be sure to view the “Notes” option for more details if it is available. We are unable to guarantee a specific carrier. This means orders may arrive in multiple boxes or at different times. We are unable to send an order without an invoice. We offer a 90-day Handshake Guarantee. The item “Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal” is in sale since Tuesday, July 29, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “summitracing_sales” and is located in Tallmadge, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Other Part Number: Painless Performance 60101, PRF-60101
  • Brand: Painless Wiring
  • Manufacturer Part Number: 60101