Land Rover Defender 90 110 130 Puma heated seat wiring kit switch loom harness

Land Rover Defender 90 110 130 Puma heated seat wiring kit switch loom harness

2 x Genuine YUF 500150LNF heated front seat switches to suit Land Rover Defenders made from 2007 until 2016. This is the Tdci or “Puma” engine Defender with either the 2.2 or 2.4 engine complete with a pre made wiring loom with one end to plug into the switch and the opposite end will plug into any genuine Land Rover Defender heated seat. The power in and out cables are approx 3.0m long so can reach easily to the battery box and to each seat. At the seat end the cable is fitted with the Land Rover OE heated seat connector so plugs directly into the seat harness. The illumination and negative cables from the switch are 0.5m long so are suitable for splicing into an existing adjacent switch, the power in and power out cables are 3200mm long. When factory fitted heated seats run from fuse position 33, this is not normally wired so a connection to an ignition live would be required in order to operate the seats. To save time and make the installation easier we offer a kit with a small box which is connected directly to the battery and when the engine is running allows power through to the seats to save connecting into any existing circuits. The cables are colour coded to match the OEM Defender wiring. The switches are genuine Land Rover but supplied in our packaging. If you have a Land Rover Defender Td5 made between 2002 and 2006 go here. As this requires different switches. The item “Land Rover Defender 90 110 130 Puma heated seat wiring kit switch loom harness” is in sale since Tuesday, October 4, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Switches”. The seller is “mobilecentre” and is located in Evesham. This item can be shipped worldwide.
  • Model/ Series: All Models
  • Manufacturer Part Number: 11DTD4HSK6
  • Brand: Mobile Centre

Land Rover Defender 90 110 130 Td4 heated seat wiring kit switch loom harness

Land Rover Defender 90 110 130 Td4 heated seat wiring kit switch loom harness

2 x Genuine YUF 500150LNF heated front seat switches to suit Land Rover Defenders made from 2007 until 2016. This is the Tdci or “Puma” engine Defender with either the 2.2 or 2.4 engine complete with a pre made wiring loom with one end to plug into the switch and the opposite end will plug into any genuine Land Rover Defender heated seat. The power in and out cables are approx 3.0m long so can reach easily to the battery box and to each seat. At the seat end the cable is fitted with the Land Rover OE heated seat connector so plugs directly into the seat harness. The illumination and negative cables from the switch are 0.5m long so are suitable for splicing into an existing adjacent switch, the power in and power out cables are 3200mm long. When factory fitted heated seats run from fuse position 33, this is not normally wired so a connection to an ignition live would be required in order to operate the seats. To save time and make the installation easier we offer a kit with a small box which is connected directly to the battery and when the engine is running allows power through to the seats to save connecting into any existing circuits. The cables are colour coded to match the OEM Defender wiring. The switches are genuine Land Rover but supplied in our packaging. If you have a Land Rover Defender Td5 made between 2002 and 2006 go here. As this requires different switches. The item “Land Rover Defender 90 110 130 Td4 heated seat wiring kit switch loom harness” is in sale since Saturday, July 25, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Switches”. The seller is “mobilecentre” and is located in Evesham. This item can be shipped worldwide.
  • Model/ Series: All Models
  • Manufacturer Part Number: 11DTD4HSK6
  • Brand: Mobile Centre

Land Rover Defender 90 110 130 heated seat wiring loom harness Td5 2002 2006

Land Rover Defender 90 110 130 heated seat wiring loom harness Td5 2002 2006

SEATS ARE NOT SUPPLIED THIS IS THE WIRING LOOM ONLY. Land Rover Defender Td5 made from 2002 until 2006 wiring loom with IGNSENS to suit YUG 102430 & YUG 102440 heated front seat switches fitted with OEM Land Rover heated seat connectors. The illumination and negative cables are 500mm long so are suitable for splicing into an existing switch. The power in and out cables are 3200mm long so can reach easily to the battery box and to each seat. When seats are fitted in the factory fuse position 33 is used and normally not wired unless seats were fitted so this kit is supplied with out 23IGNGEN02. To make the install easier we supply a small box which is wired directly to the battery and provides outputs for the left and right seat which are only live when the engine is running. The cables are colour coded to match the OEM Defender wiring and will plug straight into the original Land Rover heated seats as fitted from 2002 and will only require a suitable earth connection for the black wire. This listing is for TWO harnesses and switches. If you have a Td4 Tdci Defender made between 2007 and 2016 go here. The item “Land Rover Defender 90 110 130 heated seat wiring loom harness Td5 2002 2006″ is in sale since Tuesday, September 18, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Switches”. The seller is “mobilecentre” and is located in Evesham. This item can be shipped worldwide.
  • Country/Region of Manufacture: United Kingdom
  • Model/ Series: All Models
  • Manufacturer Part Number: 11DTD5HSK7
  • Brand: Mobile Centre

Defender Heated Wind Screen Wiring Harness Relay With Switch PRE 2002

Defender Heated Wind Screen Wiring Harness Relay With Switch PRE 2002

LAND ROVER DEFENDER HEATED WINDSCREEN. Heated front screen wiring kit complete with OEM Land Rover switch to suit vehicles UPTO2002. Fitted with the OEM style heated screens with two tabs or wires – one in each corner. Kit requires minimal connections such as positive & negative power, ignition live and illumination live. The kit is rated at 20A with an on time of around ten minutes suitable for use with heated screen part number CMB000411 or equivalent. Power cable is 500mm from relay set to battery terminated with M8 rings. Heated screen supply cable is 3000mm long from relay to screen terminated in an insulated female spade. Screen earth cable 500mm long supplied terminated with a female spade and M8 ring terminal. Any item which has failed will be subject to their inspection. All warranties exclude fair wear and tear, abuse or incorrect fitment. Images are used for illustration purposes, actual items may differ slightly due to specification changes etc. Refer to item description for exact specification and vehicle fitment. You will be contacted if this is the case. The item “Defender Heated Wind Screen Wiring Harness Relay With Switch PRE 2002″ is in sale since Friday, November 20, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Wiring Looms”. The seller is “lrsoffroad” and is located in Doncaster, South Yorkshire. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile, United States.
  • Brand: Unbranded
  • Manufacturer Part Number: da1400

Defender Heated Wind Screen Wiring Harness Relay and OEM TD5 TDCi Switch Kit

Defender Heated Wind Screen Wiring Harness Relay and OEM TD5 TDCi Switch Kit

Independant Land Rover Specialist Since 1974. Durite Auto Electrical Parts. NAS rear step bumper. Rock / tree sliders. Pipes & Servo’s. Plasma rope & Cables. Bike racks / Roof bars / boxes. Wheel adaptors & Spacers. Wheel & Tyre packages. Swingaway spare wheel carriers. Spare wheel mounts mount. Land Rover Gifts & Accessories. Snorkels / raised air intakes. Side, Rear steps & Runners. Repair & Service parts. Shocks / Steering Dampers. Exhaust Components / Kits. Fuel & Emission Systems. KBX Vents & Grille Kits. Replacement Heavy Duty Universal Joint UJ For Wide Angle Propshafts – DA6356. Land Rover Defender (’87-’98) Galvanized Fuel Filler Neck Tube – NTC2676. Defender Heated Wind Screen Wiring Harness Relay and OEM TD5 TDCi Switch Kit. Defender Heated Windscreen Wiring Kit This wiring kit allows you to retro fit a heated windscreen into any Defender with ease. Heated windscreens make waiting for the heater to dither into life to clear the screen a thing of the past. Fitting the screen is straight forward, the wiring usually isn’t. This harness will work with OEM style heated screens with two tabs or wires at the base of the screen, one in each corner. This kit is supplied with an OEM Land Rover switch to suit 2002 to 2016. This will fit the later styles of dash found after 2002. Features Kit requires minimal connections such as positive and negative power, ignition like and illumination live. The kit is rated at 20A with an “on” time of around 10 minutes Suitable for OEM windscreen CMB000411 or equivalent. Power cable is 500mm from relay set to battery, terminated with M8 rings. Heated screen supply cable is 3000mm long from the relay to the screen terminated in an insulated female spade. Screen earth cable is 500mm long supplied terminated with a female spade and M8 ring terminal. This is suitable for the following vehicles: Land Rover Defender – 2002 to 2016 unless the later style TD5 or Puma dash is fitted to an earlier vehicle Please see our other items for thousands more Land Rover parts and accessories. Channel Islands, Isle of Man, Isle of Wight, Scottish Highlands & Islands, Northern Ireland, including the following post codes. AB37-38, AB40-56, FK17-21, BT, HS, IV1-28, IV30-37, IV40-56, IV63, KA27-28, KW1-17, PA20-49, PA60-80, PH15-26, PH30-44, PH49-50, ZE, JE, GY. PLEASE CHECK YOUR POST CODE CORRECTLY. (Please note, in some cases images used are library photos and can differ slightly from actual product). RST Online are trusted suppliers of Britpart, Bearmach, Allmakes, Durite, DDS and genuine Land Rover parts. We can supply Genuine, OEM and aftermarket Land Rover parts and accessories for all models. First established in 1974 RST Landrovers are one of East Anglia’s leading independent Land Rover specialists. With our experienced workshop and busy parts store we are able to offer everything you need for your Land Rover. We pride ourselves on our customer service, with many returning customers and brilliant feedback. Please get in touch and we’ll be happy to help. Our aim is to make sure your order is delivered on time. We will endeavor to process all orders made before 3pm Monday to Friday the same day. If you require the item urgently please get in touch and we can ensure that it is dispatched in the most suitable method as soon as possible. Our couriers may not always be able to provide a next day service depending on weather, tides and ferry timetables. Channel Islands, Isle of Man, Isle of Wight, Northern Ireland and the Scottish Highlands with the following postcodes. We cannot accept cheque or postal orders. VAT Registration No: GB 104 490 639. Company Registration No: 7367427. Additional information may be required in the case of vehicle components, about the vehicle, the date and mileage of when parts were fitted and failed. In some cases stock photos are used. Our suppliers reserve the right to alter products without notice. We will however try to inform you of any alterations in the stock we receive from them. All efforts are made to ensure that the items are advertised correctly. We can only accept the return of opened items if they are faulty. We cannot accept items over 30 days unless they are faulty. You will be responsible for the costs of returning the items to us unless we delivered the item to you in error, or if the item is damaged, faulty or defective. When returning any item, make sure you include a copy of the invoice or invoice number and a note explaining the reason for return. Our return address is. If you would like to cancel your order, please let us know in good time so that it is not packed and dispatched. We apologise for any inconvenience caused. Our office hours are. Defender & Range Rover Classic Door Lock Button, Escutcheon & Housing – DA2499. Land Rover Defender Front Windscreen Washer Jet Twin Nozzle – LR061677. Mintex Cera-Tec Brake Pad Anti Squeal Lubricant Grease Compound 75ml – DA2389. Bearmach Land Rover Defender 90 110 127 130 Front Windscreen Rubber Glazing Seal. Land Rover 90 110 130 Defender Wheels Arch Spat Clip Rivets x10 – AFU1075. Land Rover Defender Replacement Door Lock Barrel & Key Set x3 – MTC6504. Bearmach Land Rover Defender Front Windscreen Washer Jet Twin Nozzle – LR061677. Land Rover Discovery 3 Steel Space Saver Spare Wheel 175/80 R19 5.5J – DA1217. Defender & Discovery 2 TD5 Exhaust Manifold To Turbo Gasket OEM Elring – ERR6768. Land Rover Defender 90 300 Tdi Performance Straight Through Exhaust Pipe Kit. Land Rover Defender Front Driver & Passenger Outer Seat Base – Vinyl Twill. Land Rover Defender’97 on Windscreen Wash & Wiper Stalk Switch – AMR6106. Range Rover P38 Mk2 – 1995 to 2002 Pollen Cabin Filters BTR8037 x2. Really happy with service. Land Rover Defender Discovery 2 TD5 Terrafirma Performance Foam Air Filter TF382. This is a short description about my company, lorem ipsum.. The item “Defender Heated Wind Screen Wiring Harness Relay and OEM TD5 TDCi Switch Kit” is in sale since Wednesday, November 11, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Wiring Looms”. The seller is “rstlandrovers” and is located in GB. This item can be shipped to United Kingdom.
  • Brand: Aftermarket
  • Manufacturer Part Number: DA1401
  • MPN: DA1401
  • Type: Wiring Kit
  • Subtype: Heated Screen

Defender Heated Wind Screen Wiring Harness Relay and Carling Contura Switch Kit

Defender Heated Wind Screen Wiring Harness Relay and Carling Contura Switch Kit

Independant Land Rover Specialist Since 1974. Durite Auto Electrical Parts. NAS rear step bumper. Rock / tree sliders. Pipes & Servo’s. Plasma rope & Cables. Bike racks / Roof bars / boxes. Wheel adaptors & Spacers. Wheel & Tyre packages. Swingaway spare wheel carriers. Spare wheel mounts mount. Land Rover Gifts & Accessories. Snorkels / raised air intakes. Side, Rear steps & Runners. Repair & Service parts. Shocks / Steering Dampers. Exhaust Components / Kits. Fuel & Emission Systems. KBX Vents & Grille Kits. Land Rover Discovery 3 Trico Rear Window Wiper Blade – DKB500680. Land Rover Discovery 2 & Range Rover P38 OEM Lower Steering Ball Joint FTC3571G. Defender Heated Wind Screen Wiring Harness Relay and Carling Contura Switch Kit. Defender Heated Windscreen Wiring Kit This wiring kit allows you to retro fit a heated windscreen into any Defender with ease. Heated windscreens make waiting for the heater to dither into life to clear the screen a thing of the past. Fitting the screen is straight forward, the wiring usually isn’t. This harness will work with OEM style heated screens with two tabs or wires at the base of the screen, one in each corner. This kit has a Carling switch which will require mounting. Features Kit requires minimal connections such as positive and negative power, ignition like and illumination live. The kit is rated at 20A with an “on” time of around 10 minutes Suitable for OEM windscreen CMB000411 or equivalent. Power cable is 500mm from relay set to battery, terminated with M8 rings. Heated screen supply cable is 3000mm long from the relay to the screen terminated in an insulated female spade. Screen earth cable is 500mm long supplied terminated with a female spade and M8 ring terminal. This is suitable for the following vehicles: Land Rover Ninety/One Ten Land Rover Defender Please see our other items for thousands more Land Rover parts and accessories. Channel Islands, Isle of Man, Isle of Wight, Scottish Highlands & Islands, Northern Ireland, including the following post codes. AB37-38, AB40-56, FK17-21, BT, HS, IV1-28, IV30-37, IV40-56, IV63, KA27-28, KW1-17, PA20-49, PA60-80, PH15-26, PH30-44, PH49-50, ZE, JE, GY. PLEASE CHECK YOUR POST CODE CORRECTLY. (Please note, in some cases images used are library photos and can differ slightly from actual product). RST Online are trusted suppliers of Britpart, Bearmach, Allmakes, Durite, DDS and genuine Land Rover parts. We can supply Genuine, OEM and aftermarket Land Rover parts and accessories for all models. First established in 1974 RST Landrovers are one of East Anglia’s leading independent Land Rover specialists. With our experienced workshop and busy parts store we are able to offer everything you need for your Land Rover. We pride ourselves on our customer service, with many returning customers and brilliant feedback. Please get in touch and we’ll be happy to help. Our aim is to make sure your order is delivered on time. We will endeavor to process all orders made before 3pm Monday to Friday the same day. If you require the item urgently please get in touch and we can ensure that it is dispatched in the most suitable method as soon as possible. Our couriers may not always be able to provide a next day service depending on weather, tides and ferry timetables. Channel Islands, Isle of Man, Isle of Wight, Northern Ireland and the Scottish Highlands with the following postcodes. We cannot accept cheque or postal orders. VAT Registration No: GB 104 490 639. Company Registration No: 7367427. Additional information may be required in the case of vehicle components, about the vehicle, the date and mileage of when parts were fitted and failed. In some cases stock photos are used. Our suppliers reserve the right to alter products without notice. We will however try to inform you of any alterations in the stock we receive from them. All efforts are made to ensure that the items are advertised correctly. We can only accept the return of opened items if they are faulty. We cannot accept items over 30 days unless they are faulty. You will be responsible for the costs of returning the items to us unless we delivered the item to you in error, or if the item is damaged, faulty or defective. When returning any item, make sure you include a copy of the invoice or invoice number and a note explaining the reason for return. Our return address is. If you would like to cancel your order, please let us know in good time so that it is not packed and dispatched. We apologise for any inconvenience caused. Our office hours are. Defender & Range Rover Classic Door Lock Button, Escutcheon & Housing – DA2499. Land Rover Defender Front Windscreen Washer Jet Twin Nozzle – LR061677. Mintex Cera-Tec Brake Pad Anti Squeal Lubricant Grease Compound 75ml – DA2389. Bearmach Land Rover Defender 90 110 127 130 Front Windscreen Rubber Glazing Seal. Land Rover 90 110 130 Defender Wheels Arch Spat Clip Rivets x10 – AFU1075. Land Rover Defender Replacement Door Lock Barrel & Key Set x3 – MTC6504. Land Rover Defender TD5 ELRING Oil Cooler Gasket. Defender Heated Wind Screen Wiring Harness Relay and OEM TD5 TDCi Switch Kit. Very pleased thanks pal. Land Rover Series & Defender Side, Stop Tail & Indicator Light Set – DA1077. Land Rover Defender 200 Tdi Viscous Fan Coupling – ETC7238. Land Rover 90 110 127 (To’88) 2.5TD Turbo Diesel Exhaust Down Pipe – NTC4426. Back Lit Double Incline Pitch and Roll Land Meter to Suit All Off Road Vehicles. Bearmach Land Rover Defender 90 110 Clear XS Front Indicator Lamp MA on (’94) x2. This is a short description about my company, lorem ipsum.. The item “Defender Heated Wind Screen Wiring Harness Relay and Carling Contura Switch Kit” is in sale since Wednesday, November 11, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Wiring Looms”. The seller is “rstlandrovers” and is located in GB. This item can be shipped to United Kingdom.
  • Brand: Aftermarket
  • Manufacturer Part Number: DA1400
  • MPN: DA1400
  • Type: Wiring Kit
  • Subtype: Heated Screen

Defender Heated Wind Screen Wiring Harness Relay With Switch it for TD5 TDCi

Defender Heated Wind Screen Wiring Harness Relay With Switch it for TD5 TDCi

LAND ROVER DEFENDER HEATED WINDSCREEN. Heated front screen wiring kit complete with OEM Land Rover switch to suit vehicles between 2002 and 2015. FOR td5 AND tdcI / PUMA DASHES. Fitted with the OEM style heated screens with two tabs or wires – one in each corner. Kit requires minimal connections such as positive & negative power, ignition live and illumination live. The kit is rated at 20A with an on time of around ten minutes suitable for use with heated screen part number CMB000411 or equivalent. Power cable is 500mm from relay set to battery terminated with M8 rings. Heated screen supply cable is 3000mm long from relay to screen terminated in an insulated female spade. Screen earth cable 500mm long supplied terminated with a female spade and M8 ring terminal. Any item which has failed will be subject to their inspection. All warranties exclude fair wear and tear, abuse or incorrect fitment. Images are used for illustration purposes, actual items may differ slightly due to specification changes etc. Refer to item description for exact specification and vehicle fitment. You will be contacted if this is the case. The item “Defender Heated Wind Screen Wiring Harness Relay With Switch it for TD5 TDCi” is in sale since Friday, November 20, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Wiring Looms”. The seller is “lrsoffroad” and is located in Doncaster. This item can be shipped worldwide.
  • Brand: Unbranded
  • Manufacturer Part Number: da1401