Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &

Mallory Mechanical Advance ELECTRONIC IGNITION Distributor. FITS: 1936 thru 1969 Big Twin Harley-Davidsons.. Mallory’s 12 volt ELECTRONIC IGNITION system features. Designed for dual fire applications with single or dual spark plug heads. Designed with built-in mechanical spark advance unit. Using Mallory’s time tested breaker-less ignition circuit, combined with modern surface mount Thermal-Clad. Construction, the kit can drive any ignition coil or combination of ignition coils with a total primary resistance of at least 2.0 OHMs. We recommend ignition coils with 2.3-3.0 OHMs for racing applications and ignition coils with 3.0-4.0 OHMs for street and highway use. Incorporates an infrared light beam and an optical interrupter to trigger the ignition. This type of trigger is extremely accurate and much more effective than hall effect (magnetic) type ignitions. Use with spiral core or carbon core suppression type spark plug wires. Billet aluminum ignition can easily be installed without removing the front cylinder head. Installation instructions are included.. + PLUS + WIRING Harness (male to female’easy’ plug-in included).. Stock distributors & other parts available… Contact Paul with what you need? The item “Harley 1936-1969 MALLORY ELECTRONIC IGNITION Distributor. WITH Wire Harness &” is in sale since Tuesday, October 1, 2013. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Other Electrical & Ignition”. The seller is “docrob50″ and is located in Lockport, Illinois. This item can be shipped worldwide.
  • Manufacturer Part Number: Mallory A556
  • Surface Finish: BRAND New, Aluminium Machine Finish
  • Part Brand: Mallory Electronic Distributor WITH Parts
  • Part Type: Electrical Components, Distributors
  • Part By Region: American … 100% MADE in-the-USA! ………..
  • Make: for Harley-Davidson Big Twins 1936 thru 1969
  • Model: EL, FL, FLH all Big Twin Harleys 1936 thru 1969
  • Brand: MALLORY DISTRIBUTOR

Fits Mazda RX-8 RX8 Smart IGNITION Coil 10mm Wires with Harness & Mounting Bracket

Fits Mazda RX-8 RX8 Smart IGNITION Coil 10mm Wires with Harness & Mounting Bracket

Fits Mazda RX-8 RX8 Smart IGNITION Coil 10mm Wires with Harness & Mounting Bracket

Fits Mazda RX-8 RX8 Smart IGNITION Coil 10mm Wires with Harness & Mounting Bracket

Rotary 1.3L Renesis. Ignition Coil Adapter Harness 36″ Conversion Kit “Plug and Play to adapt Performance Smart Coils to OEM RX8 Connector. Aluminum Bracket Assembly To Mount Hi Energy Smart Coils into Stock RX8 Location. High Performance Coil Wires Set 22 Long x 4 Pcs. 4 Bracket Spacers / Nuts / Bolts / Washers & Hardware to Mount. All in one kit! This Plug-n-Play Harness is used to connect any of the Coils listed below directly to your RX-8 wiring harness without having to cut and splice into your factory harness. 2004, 2005, 2006, 200, 2008, 2009, 2010, 2011 Mazda RX-8 / RX8 Wire harness conversion kit and 10mm ignition wires with (4) FOUR High Performance SMart Coil Heavy Duty IGNTION COIL PACKS. CHECK MY OTHER AUCTIONS FOR COMPLETE SET OF RX8 PERFORMANCE COIL REPLACMENTS & LS3 Coil Conversion Kits. Professional Installation is Highly Recommended (No Instructions Included). Cross Reference Part Numbers. NP-RX8SMRTIC, 30-2853, 302853, 556-112, 556112, IGN1, IGN-1A, IGN-1, IGN1A. The item “Fits Mazda RX-8 RX8 Smart IGNITION Coil 10mm Wires with Harness & Mounting Bracket” is in sale since Thursday, October 1, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Other”. The seller is “npboosted” and is located in Campbell River, British Columbia. This item can be shipped worldwide.
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Interchange Part Number: Mounting Bracket Included
  • OE Spec or Performance/Custom: Performance/Custom
  • Placement on Vehicle: Front
  • Surface Finish: RED & BLACK
  • Manufacturer Part Number: NP-RX8SMRTIC
  • Modification Description: Hi Energy Performance Coil Pack kit
  • Other Part Number: 19005218 410001 10457730 50016 6737101 UF262
  • Brand: NPBoosted
  • Fitment Type: Performance/Custom
  • Warranty: 1 Year
  • Bundle Description: Performance Coil Conversion Kit
  • Type: Ignition Coil

4 HI Output Ignition Coils fits 4cyl Models Honda Civic S2K Acura Mazda RX8 RX7

4 HI Output Ignition Coils fits 4cyl Models Honda Civic S2K Acura Mazda RX8 RX7

4 HI Output Ignition Coils fits 4cyl Models Honda Civic S2K Acura Mazda RX8 RX7

New (4) Four Performance NPBoosted Ignition Coil Packs. With (4) Pigtail Harness Connector Looms 11 Long Wires / 5 Pin Plug. Custom Auto Applications when High Output Coil Needed. Turbocharged / Supercharged / High Compression. Mercury Marine / Mercruiser / Mariner Outboard. This coil fits Many Mercury engines from 2004 to present model. Mercury EFI 4-Stroke Models: 30/ 40/ 50/ 60 EFI. Mercury Optimax: 75/ 90/ 115/ 125/ 200/ 225/ 250. Mercury Optimax Pro XS: 115 Pro/ 175 Pro/ 200 Pro/ 225 Pro/ 250 Pro/. Mercury Optimax Racing: 225 XS/ 225 Sport XS/ 250XS/ 250 Sport XS/ 300XS. Mercury EFI 2-Stroke Models: 150 (2.5 EFI)/ 175 (2.5 EFI)/ 200 (2.5 EFI)/ 200 (3.0 EFI)/ 225 (3.0 EFI)/ 250 (3.0 EFI). Mercury Racing EFI 2-Stroke: 225X/ 300X. The item “4 HI Output Ignition Coils fits 4cyl Models Honda Civic S2K Acura Mazda RX8 RX7″ is in sale since Sunday, January 14, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “npboosted” and is located in Campbell River, British Columbia. This item can be shipped worldwide.
  • Brand: NPBoosted
  • Manufacturer Part Number: NP-77471
  • Interchange Part Number: Performance Aftermarket NPboosted Coils Packs
  • Surface Finish: Red Casing
  • Warranty: 2 Year
  • EAN: Does not apply
  • Ignition Part Type: Ignition Coil Packs
  • UPC: 789099085289
  • Other Part Number: ign1, IGN-1A, IGN-1, IGN1A
  • Fitment Type: Performance/Custom
  • Superseded Part Number: EFI Smart Coil
  • Type: Coil

4 Performance Ignition Coils Wire Harness for 08+ Lancer Evolution X EVO 10 2.0L

4 Performance Ignition Coils Wire Harness for 08+ Lancer Evolution X EVO 10 2.0L

4 Performance Ignition Coils Wire Harness for 08+ Lancer Evolution X EVO 10 2.0L

4 Pack Performance Ignition Coils + Connector Clip Plugs / Pigtails for 08-16 Lancer Evolution X MR GSR Ralliart EVO EVOX 10 MIVEC 2.0L 4B11. 4B11 2.0L MIVEC Turbocharged. All Turbo 2.0L Models – Ralliart, MR, GSR. JDM, USDM, CDM, European Models. 4 – Performance Ignition Coil Packs – Complete Set. 4 – Pigtail Connector Clips – Harness Repair Kit. (3 PIN) Connector Plug. Cross Reference Part Numbers. NP-EVO10IC, H6T11471, J025, 1831A042, 1832A042, H006T11471. The item “4 Performance Ignition Coils Wire Harness for 08+ Lancer Evolution X EVO 10 2.0L” is in sale since Wednesday, May 27, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “npboosted” and is located in Campbell River, British Columbia. This item can be shipped worldwide.
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Interchange Part Number: H6T11471, J025 Evolution, EVO 10, EVO X, CZ4A 4B11
  • Placement on Vehicle: Front – Engine Top
  • Surface Finish: RED / BLACK
  • Manufacturer Part Number: NP-EVO10IC
  • Modification Description: Hi Energy Performance Coil Packs x4 + Wire Connector Plugs
  • Other Part Number: H6T11471,J025, Evolution, EVO 10, EVO X, CZ4A 4B11
  • Brand: NPBoosted
  • Fitment Type: Direct Replacement
  • Warranty: 1 Year
  • Bundle Description: 4 Pack – Complete Ignition Coil Set w/ Wire Harness Repair Kit
  • Type: Coil

JDM Ignition Coil On Plug Conversion Kit for Lancer Evolution EVO 4 5 6 7 8 MR

JDM Ignition Coil On Plug Conversion Kit for Lancer Evolution EVO 4 5 6 7 8 MR

JDM Ignition Coil On Plug Conversion Kit for Lancer Evolution EVO 4 5 6 7 8 MR

4G63 Turbo 2.0L I4 Engine. EVO 4 5 6 7 8. EVO IV V VI VII VIII IX. JDM / USDM / CDM / EUROPEAN. Left & Right Hand Drive Models. (4) Aftermarket Ignition Coils Packs. (1) Wire Harness Conversion Kit. (1) Carbon Fiber Coil Pack Bracket. Stainless Nuts, Bolts, Washers. (4 PIN) To Coil Plug. (3 PIN) To Main Wire Harness. Professional Installation is Highly Recommended (No Instructions Included). Cross Reference Part Numbers. 1788330, 50118, UF523, 5C1424, C1431, NP-EVO48IC. The item “JDM Ignition Coil On Plug Conversion Kit for Lancer Evolution EVO 4 5 6 7 8 MR” is in sale since Saturday, August 15, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “npboosted” and is located in Campbell River, British Columbia. This item can be shipped worldwide.
  • Superseded Part Number: 1788330 50118 UF523 5C1424 C1431
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Interchange Part Number: 1788330, 50118, UF523, 5C1424, C1431
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: Performance/Custom
  • Surface Finish: Black / Yellow / Blue
  • Manufacturer Part Number: NP-EVO48IC
  • Modification Description: Hi Performance Coils
  • Brand: NPBoosted
  • Fitment Type: Performance/Custom
  • Warranty: 1 Year
  • Bundle Description: Performance Coil Pack Conversion Kit

FuelTech SparkPRO-3 Wiring Harness 6.5ft energy inductive ignition performance

FuelTech SparkPRO-3 Wiring Harness 6.5ft energy inductive ignition performance

FuelTech SparkPRO-3 Wiring Harness 6.5ft energy inductive ignition performance

FuelTech SparkPRO-3 Wiring Harness 6.5ft energy inductive ignition performance

FuelTech SparkPRO-3 high energy inductive ignition – performance. FUELTECH SPARKPRO-3 2 METER WHIP. The Fueltech SparkPRO is a high energy inductive ignition module, with the latest technology available in spark ignition and spark plug power systems, thus generating better combustion and consequently increased power. Fueltech SparkPRO should be used on vehicles that have an internal ignitionless coil in conjunction with Fueltech programmable injections. What is Fueltech SparkPRO for? An engine’s ignition system is comprised of equipment that controls the ignition point and a module that is responsible for spark energy, but an accurate and detailed ignition point mapping system without a powerful and efficient spark is not enough. So that combustion occurs correctly and with the maximum power possible. SparkPRO is a high energy inductive ignition module with the latest technology available in ignition power systems. It allows high voltage electrical arcing by applying up to 400V to the ignition coil primary, which represents 40,000V on the spark plug (with a 1: 100 coil), allowing for greater electrode openness compared to common ignition systems. (eg carbureted engine ignition modules). This equipment has high current capacity and can work with low impedance coils, allowing sparks with greater energy and duration. SparkPRO is also suitable for electromagnetic interference problems that cause ignition control system failures as it is a very robust system with high efficiency filters. There are options for this equipment to drive one to six coils. Comparisons between the SparkPRO module, an inductive ignition module, and capacitive ignition modules are frequent. One of the advantages of inductive ignition over capacitive is the longer spark duration. Quality capacitive ignitions utilize the multiple spark feature at low revs, where it must be present for up to 20 degrees of the rev period. For example, the MSD 6A fires approximately 7 short sparks at idle to be able to stay 20 degrees in ignition, while a high energy inductive ignition can generate the required 20 degrees of residence with just one spark. Another advantage of inductive ignition is the lower electromagnetic noise generated over the engine’s electrical and electronic system, dramatically reducing interference problems, which often damage sound systems to electronic injection systems. It is important to note that quality capacitive ignitions usually provide sparks with more energy than inductive ignition systems, but this does not necessarily represent a power gain, especially in engines powered by electronic injection systems where the fuel air mixture is very well dosed. Requiring less of the ignition system. SparkPRO module available models. SparkPRO-1 (1 coil): 3 wires. SparkPRO-2 (2 coils): 6 wires. SparkPRO-3 (3 coils): 8 wires. SparkPRO-4 (4 coils): 10 wires. SparkPRO-5 (5 coils): 12 wires. SparkPRO-6 (6 coils): 14 wires. SparkPRO-8 (8 coils): 18 wires. 01 Fueltech SparkPro-3 Ignition Module. 01 Whip of 2 meters for installation. 01 Installation and operation manual. PLAYERS MP3 / MP5. The item “FuelTech SparkPRO-3 Wiring Harness 6.5ft energy inductive ignition performance” is in sale since Thursday, September 5, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Computer, Chip, Cruise Control\Engine Computers”. The seller is “lm_corporation” and is located in SP, . This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: Brazil
  • Custom Bundle: No
  • Manufacturer Part Number: sparkpro-3
  • Brand: Fueltech
  • Fitment Type: Performance/Custom

Suzuki Ignition Wire Harness Assembly Complete Lt450r Ltr450 Quad Racer 450

Suzuki Ignition Wire Harness Assembly Complete Lt450r Ltr450 Quad Racer 450

Suzuki Ignition Wire Harness Assembly Complete Lt450r Ltr450 Quad Racer 450

Suzuki Ignition Wire Harness Assembly Complete Lt450r Ltr450 Quad Racer 450

Suzuki Ignition Wire Harness Assembly Complete Lt450r Ltr450 Quad Racer 450

Suzuki Ignition Wire Harness Assembly Complete Lt450r Ltr450 Quad Racer 450

Suzuki Ignition Wire Harness Assembly Complete Lt450r Ltr450 Quad Racer 450

SUZUKI IGNITION WIRE HARNESS ASSEMBLY COMPLETE. Item Is Brand New In Original Suzuki Packaging. Fits the following Vehicles. 2006 QuadRacer (LT-R450) – WIRING HARNESS. 2006 QuadRacer (LT-R450Z) – WIRING HARNESS. 2007 QuadRacer (LT-R450) – WIRING HARNESS. 2007 QuadRacer (LT-R450Z) – WIRING HARNESS. 2008 QuadRacer (LT-R450) – WIRING HARNESS. 2008 QuadRacer (LT-R450Z) – WIRING HARNESS. This is to ensure your package gets to you as quickly and as well packaged as possible. Our inventory is constantly updating and changing, we do our best to keep it as accurate as possible. However, in some instances seasonal items sell very fast and can be subject to temporary delays. In the event of a prolonged delay we will make our best effort to contact and notify you of such delays. We will do our best to work with you to get you your item as fast as possible. Electrical parts are NOT returnable. The item “SUZUKI IGNITION WIRE HARNESS ASSEMBLY COMPLETE LT450R LTR450 QUAD RACER 450″ is in sale since Thursday, February 18, 2021. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Electrical & Ignition\Wires & Electrical Cabling”. The seller is “ocp-parts-warehouse” and is located in Toms River, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Manufacturer Part Number: 36610-45G00
  • Brand: Suzuki

Ignition Coil on Plug Kit for Mitsubishi Evolution Lancer EVO 4 5 6 7 8 4G63 2.0

Ignition Coil on Plug Kit for Mitsubishi Evolution Lancer EVO 4 5 6 7 8 4G63 2.0

Ignition Coil on Plug Kit for Mitsubishi Evolution Lancer EVO 4 5 6 7 8 4G63 2.0

4G63 Turbo 2.0L I4 Engine. EVO 4 5 6 7 8. EVO IV V VI VII VIII IX. JDM / USDM / CDM / EUROPEAN. Left & Right Hand Drive Models. (4) Aftermarket Ignition Coils Packs. (1) Wire Harness Conversion Kit. (1) Carbon Fiber Coil Pack Bracket. Stainless Nuts, Bolts, Washers. (4 PIN) To Coil Plug. (3 PIN) To Main Wire Harness. Professional Installation is Highly Recommended (No Instructions Included). Cross Reference Part Numbers. 1788330, 50118, UF523, 5C1424, C1431, NP-EVO48IC. The item “Ignition Coil on Plug Kit for Mitsubishi Evolution Lancer EVO 4 5 6 7 8 4G63 2.0″ is in sale since Saturday, August 15, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “npboosted” and is located in Campbell River, British Columbia. This item can be shipped worldwide.
  • Superseded Part Number: 1788330 50118 UF523 5C1424 C1431
  • Modified Item: Yes
  • Custom Bundle: Yes
  • Interchange Part Number: 1788330, 50118, UF523, 5C1424, C1431
  • Placement on Vehicle: Front
  • OE Spec or Performance/Custom: Performance/Custom
  • Surface Finish: Black / Yellow / Blue
  • Manufacturer Part Number: NP-EVO48IC
  • Modification Description: Hi Performance Coils
  • Brand: NPBoosted
  • Fitment Type: Performance/Custom
  • Warranty: 1 Year
  • Bundle Description: Performance Coil Pack Conversion Kit

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

4pack Hyundai Kia Genuine Coil Ignition Engine + Wire Wiring Extension Harness

NEW GENUINE 4PACK HYUNDAI KIA GENUINE COIL IGNITION ENGINE + WIRE WIRING EXTENSION HARNESS. The item “4PACK HYUNDAI KIA GENUINE COIL IGNITION ENGINE + WIRE WIRING EXTENSION HARNESS” is in sale since Wednesday, November 6, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Ignition Systems\Coils, Modules & Pick-Ups”. The seller is “abctrading86″ and is located in Riverside, California. This item can be shipped worldwide.
  • Country/Region of Manufacture: Korea, Republic of
  • Interchange Part Number: 27301-2B010 27301 2B010
  • Manufacturer Part Number: 273012B010 27301-2B010
  • Other Part Number: HYUNDAI & KIA OEM ORIGINAL GENUINE
  • Brand: Hyundai & KIA

KTM CDI Box Wiring Harness Electrical OEM 250 400 450 520 525 560 ECU Ignition

KTM CDI Box Wiring Harness Electrical OEM 250 400 450 520 525 560 ECU Ignition

NEW Wiring Upgrade for 4 stoke KTM models (a complete electrical kit to replace unobtainable older parts) Complete Factory KTM Part- Fits All in Ebays Compatibility- please message us with your exact year and model after ordering. Also have rectifier plug in options as well if modifying for lighting. If Vieing On A Mobile Device See More Info In Their Desktop View On Your Computer. Our Pictures Above Is Exactly What You Will Receive. All Parts Are Insured For Free. International Buyers Please Note. If You Are Not Sure On Specific Dirt Bike Fitment, Please Check With Us First Before Purchasing! Thank You for Shopping At. Oem Dirtbike Parts Shall Not Be Liable For Any Special Or Consequential Damages That Result From The Use Of, Or The Inability To Use, The Materials On This Site Or The Performance Of The Products. All Of The Products Take Know How Which Requires A Professional Installer Must Mechanically Inclined Which Is Due To The Installer Being Fully Responsible And Liable So That The Machine And Is User Are Not Harmed. The End User Is 100% Responsible To Make Sure That The Product Is To Be Used As Intended. Using Products At Extreme Levels Of Stress Can Cause Serious Injury Which Is A Normal Occurrence In The Motocross Sport. Please Do Not Order From Oem Dirtbike Parts If Its Not Clear That You The Customer And/or The Installer Are100% Liable For Any Damages Or Injuries That Occur In Result Of Using Any Product In This Store. Personal Note-please Make Sure To Double Check Your Machine After Installing Any New Part From Any Supplier Or Manufacture For A Safe Ride Every Time. The item “KTM CDI Box Wiring Harness Electrical OEM 250 400 450 520 525 560 ECU Ignition” is in sale since Monday, April 23, 2018. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts”. The seller is “oemdirtbikeparts” and is located in Temecula, California. This item can be shipped worldwide.
  • drz400sm mods: Genuine wiring harness ktm kit
  • oem upgrade for -59039031400: 59039031100 , 59039031200
  • Type: NEW KTM CDI Box
  • Manufacturer Part Number: 59039031100
  • Brand: KTM