Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal

Summit Racing Part Number. Please hover mouse to enlarge image. Painless Performance Fuel Injection Harness 60101. Designed for engine swap vehicles equipped with 1982-93 TBI from a 5.7L or 5.0L throttle body injection. Painless Wiring 60124 Harness Distributor to Coil. Painless Wiring 60125 Harness Distributor to Tachometer. Lease see the “Compatibility” link at the top of the listing. Fitment information may not be available for all products and those without fitment will not have a Compatibility link. Please be sure to view the “Notes” option for more details if it is available. We are unable to guarantee a specific carrier. This means orders may arrive in multiple boxes or at different times. We are unable to send an order without an invoice. We offer a 90-day Handshake Guarantee. The item “Painless Wiring Wiring Harness Fuel Injection GM CFI/TBI Engine Swap Universal” is in sale since Tuesday, July 29, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “summitracing_sales” and is located in Tallmadge, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Other Part Number: Painless Performance 60101, PRF-60101
  • Brand: Painless Wiring
  • Manufacturer Part Number: 60101

Painless Wiring Harness Fuel Injection TPI Engine Swap Universal Kit 60102

Painless Wiring Harness Fuel Injection TPI Engine Swap Universal Kit 60102

Painless Wiring Harness Fuel Injection TPI Engine Swap Universal Kit 60102

Painless Wiring Harness Fuel Injection TPI Engine Swap Universal Kit 60102

Summit Racing Part Number. Please hover mouse to enlarge image. Painless Wiring 60102 Wiring Harness Fuel Injection GM. Designed for engine swap vehicles equipped with 1985-89 TPI from a 5.7L or 5.0L tuned port injection. Painless Wiring Classic Braid EFI Kit 70971. Summit Racing Embroidered Hat. Lease see the “Compatibility” link at the top of the listing. Fitment information may not be available for all products and those without fitment will not have a Compatibility link. Please be sure to view the “Notes” option for more details if it is available. We are unable to guarantee a specific carrier. This means orders may arrive in multiple boxes or at different times. We are unable to send an order without an invoice. We offer a 90-day Handshake Guarantee. The item “Painless Wiring Harness Fuel Injection TPI Engine Swap Universal Kit 60102″ is in sale since Wednesday, November 12, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “summitracing_sales” and is located in Tallmadge, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Other Part Number: Painless Performance 60102, PRF-60102
  • Brand: Painless Wiring
  • Manufacturer Part Number: 60102

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

Performance Fuel Injection Systems Stand Alone Fuel Injection System WIRE HARNESS & ECM (computer). This is a fuel injection system Wire harness. Upgrading your carburated Classic Car, Truck, Jeep, Mud Bogger, OFF Road Truck, or Hot Rod to Fuel Injection and using a TBI Engine from a Truck Van then Performance Fuel Injection Systems has a harness for your project. Fuel injection is becoming a very popular upgrade. Swaping in a TBI Engine is nothing new. Fuel Injection Wire Harness from Performance Fuel Injection Systems is Just what you need. We eliminate what you don’t need. Our custom Chips in the ECM (computer) have what you don’t need turned off, so you wont get a bad running engine or a CHECK ENGINE LIGHT. Stand alone means that the system only needs 12 volt ignition and 12 volt battery feed to make the system run. We only use the 5 sensors so this is a very simple system, and the best of all the fuel injection system installed on your vehicle runs completely closed loop once warmed up (14.7 air fuel ratio) just like the new vehicles, but with fewer sensors than a new car. The TBI system is based off the reliable 1987 to 1995 Chevy PU with Throttle Body Injection (TBI) this was a proven great system for years and there were and still are thousands of these vehicles out there. The ECM are remanufactured. The wiring harness is all made with TXL wire which is water oil and grease resistance, and all in convoluted loom (split loom) which makes for a good looking system when you open the hood. Comes With Complete Instructions for installation. THIS HARNESS IS FOR A CHEVY TBI ENGINE SWAP. Fuel Injection System Harness includes. Wiring Harness W/fuel pump relay and main power Relay. ECM (maybe re-manufactured) with custom calibrated EPROM chip (installed in ECM). PFI STICKER FOR YOUR WINDOW, FENDER, UNDER YOUR HOOD, OR TOOL BOX. Lifetime on harness against defects 90 days for ECM. The item “TBI Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP” is in sale since Tuesday, November 17, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “performancefuelinjectionsystems” and is located in Elsie, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Performance Fuel Injection Systems
  • Manufacturer Part Number: WH0001
  • Warranty: Yes
  • Country/Region of Manufacture: United States

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP

Performance Fuel Injection Systems Stand Alone Fuel Injection System WIRE HARNESS & ECM (computer). This is a fuel injection system Wire harness. Upgrading your carburated Classic Car, Truck, Jeep, Mud Bogger, OFF Road Truck, or Hot Rod to Fuel Injection and using a TBI Engine from a Truck Van then Performance Fuel Injection Systems has a harness for your project. Fuel injection is becoming a very popular upgrade. Swaping in a TBI Engine is nothing new. Fuel Injection Wire Harness from Performance Fuel Injection Systems is Just what you need. We eliminate what you don’t need. Our custom Chips in the ECM (computer) have what you don’t need turned off, so you wont get a bad running engine or a CHECK ENGINE LIGHT. Stand alone means that the system only needs 12 volt ignition and 12 volt battery feed to make the system run. We only use the 5 sensors so this is a very simple system, and the best of all the fuel injection system installed on your vehicle runs completely closed loop once warmed up (14.7 air fuel ratio) just like the new vehicles, but with fewer sensors than a new car. The TBI system is based off the reliable 1987 to 1995 Chevy PU with Throttle Body Injection (TBI) this was a proven great system for years and there were and still are thousands of these vehicles out there. The ECM are remanufactured. The wiring harness is all made with TXL wire which is water oil and grease resistance, and all in convoluted loom (split loom) which makes for a good looking system when you open the hood. Comes With Complete Instructions for installation. THIS HARNESS IS FOR A CHEVY TBI ENGINE SWAP. Fuel Injection System Harness includes. Wiring Harness W/fuel pump relay and main power Relay. ECM (maybe re-manufactured) with custom calibrated EPROM chip (installed in ECM). PFI STICKER FOR YOUR WINDOW, FENDER, UNDER YOUR HOOD, OR TOOL BOX. Lifetime on harness against defects 90 days for ECM. The item “TBI Wiring Harness WithECM Fuel Injection Wire Harness SBC TBI ENGINE SWAP” is in sale since Tuesday, March 28, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “performancefuelinjectionsystems” and is located in Elsie, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Performance Fuel Injection Systems
  • Manufacturer Part Number: WH0002
  • Warranty: Yes
  • Country/Region of Manufacture: United States

FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg

FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg

FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg. JEGS High Performance 101 Jeg’s Place Delaware, Ohio 43015. The item “FAST 301972 XIM Fuel Injection Wiring Harness For LS1 Stand Alone 1/pkg” is in sale since Tuesday, May 24, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Injectors”. The seller is “jegsperformance” and is located in Delaware, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: FAST
  • Manufacturer Part Number: 301972
  • Warranty: Yes

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747

Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747

America’s Oldest Speed Shop®. Has connections for 700R4 transmission. Common aftermarket fuel pump and fan relays are included. These harnesses feature all of the connection points necessary to run the engine and transmission if applicable. The emission equipment has been eliminated and only the needed connections to run the engine and transmission are incorporated. Standard length harnesses are 54 from the back of the engine to the PCM connectors. Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Made from premium grade GXL jacketed automotive wire. Most wiring is larger gauge than stock application for durability. No splices to reduce points of failure. All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping. Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification. All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks. Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation. OBD1 diagnostic port for connection to scanners and tuning tools. Made in the USA. Exactly what I needed, without the useless extras. By Logan’s Dad on June 23, 2017. I, (Mostly my ten year old Son, but he lets me help some)put a freshened up 1991 TBI 454 in a Military Humvee. Like most, I’m on a budget. I had orignally intended to salvage the factory harness, but eventually came to my senses and shopped around for a new wiring harnes. I definitely got the most bang for my buck with this one. I wasn’t expecting anywhere near the quality that I received. Nor was I expecting everything to be so clearly labeled. If I ever put myself through another diesel to big block swap, this will be the first part I order. Easy To Set Up. Yes, I recommend this product. By JB on May 10, 2017. Wiring harness was easy to install and plugged in to all my sensors with no modification. I recently installed a sbc in my 95 jeep yj and needed a tbi wiring harness. I did a lot of research and came across this harness. I would recommend this to anyone doing a tbi install! By Dannybouy on February 16, 2017. I haven’t installed yet but Has a good set of instructions and wiring looks to be well done. By Steve 1964 on March 25, 2011. This product was top notch. This was my first fuel injection swap. If they all go this well there will be many more. Related Items / Suggested Parts. Speedway 1985-89 Tuned Port Mass Air Engine Harness. Please pay for all items at the same time. We cannot combine your order if you have already paid. Not sure this part will fit? Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 65 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. All exchanges need to have reshipping charges included. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Speedway 85-92 Chevy TBI Swap Fuel Injection EFI Engine Wiring Harness 7747 8747″ is in sale since Wednesday, April 08, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Speedway Motors
  • Manufacturer Part Number: 91008592
  • Interchange Part Number: 910-08592
  • Other Part Number: 91008592