67-68 Mustang Classic Update American Autowire Wiring Harness Kit#510055

67-68 Mustang Classic Update American Autowire Wiring Harness Kit#510055

AMERICAN AUTO WIRE #510055. Complete Wiring Kit – 1967-68 Mustang For. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered Halogen headlights. Complete wiring for all running lights, brake lights and directional lights, and license lights and third brake lights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO Fusebox fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead and ground wires with proper focal length light sockets, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Color schematics and easy to understand installation instructions included. We are growing out inventory day by day. If you are placing and order for a part that we do not have in stock. If there are any issue with your item please contact me. The item “67-68 MUSTANG CLASSIC UPDATE AMERICAN AUTOWIRE WIRING HARNESS KIT#510055″ is in sale since Friday, July 14, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Other Parts”. The seller is “moxeemusclecars” and is located in Moxee, Washington. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: American AutoWire
  • Manufacturer Part Number: 510055

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA

1965 Mustang Complete under dash Harness. For all cars with 3 gauges and lights for oil and alternator warning. And a 3 speed heater motor. Will fit Coupe, Convertible and Fastback. Made in the USA. The item “1965 Ford Mustang Under Dash Complete Wire Harness Made in the USA” is in sale since Tuesday, June 21, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Accessories”. The seller is “marylandmg” and is located in Millersville, Maryland. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Manufacturer Part Number: 65-UD
  • Interchange Part Number: 65-UD-WL
  • Placement on Vehicle: Left
  • Surface Finish: Wire
  • Warranty: 1 Year
  • Country/Region of Manufacture: United States
  • Part Brand: Maryland Mustang
  • Brand: Maryland Mustang

1964 1970 FORD MUSTANG / COMET / FALCON Wire Harness Upgrade Kit fits painless

1964 1970 FORD MUSTANG / COMET / FALCON Wire Harness Upgrade Kit fits painless

This complete kit fits 1964 – 1970 FORD MUSTANG / COMET / FALCON All of our harnesses included extra long leads making them the ideal choice for longer vehicles such as trucks, wagons, and muscle cars! The extra long leads make it easy for wire tucking and routing when wiring your vehicle. Our kit offers an ultra small fuse block that can be mounted in ANY position including under the dash or seat! Ideal for hot rods, race cars, and custom installations. Ourfull wiring harness kit is compatible with most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, STEWART WARNER, VDO, and manyothers. It is easy to add switches to our harness. Please note headlight switch knob is not included. Wire your ride perfectly the 1st. For almost 40 years, Steves House Of Speed has been satisfying customers’ needs by providing them with the parts they need at the lowest prices. We house the most comprehensive collection of parts and accessories in the world. If your parts-shopping experience is a hit-or-miss or simply unsatisfactory, switch over to us. You won’t regret it! We offer the Right Part and the Perfect Fit!!! Other auto parts stores carry only a couple of thousand parts in stock. Sometimes, it can get very frustrating when you spend time, sweat, and gas only to be told that they don’t have what you need. Well, you’ll never experience that here at Steves House Of Speed! Our huge warehouse has over 1 million parts for over 25 million different vehicles. Add to that more than 100,000 accessories for over 6 million rides and what you get is the right part with the perfect fit. No more frustration, no more stalled restoration projects, no more having to wait to get back on the road! You’ll find what you want right here. We stock products that are just as good (or better) than those your ride came with. If you need your parts fast, then you’ll feel right at home here with Steves House Of Speed. 1964 – 1970 FORD MUSTANG / COMET / FALCON Wire Harness Upgrade Kit fits painless. Wire your ride perfectly the 1st time! Application :: 1964 – 1970 FORD MUSTANG / COMET / FALCON Fuses :: 15 Circuits :: 24 Prewired Terminals :: 118 Accessory Kit :: Yes Dimmer Switch :: Yes Headlight Switch :: Yes Ignition Switch :: Yes Turn Signal Flasher Harness :: Yes Engine Harness :: Yes Prewired Harness :: Yes Labeled Wire :: Yes Color Coded :: Yes Fuse Cover :: Yes Built in Relay :: Yes Extra Wire :: Yes – Plug n Play Technology High Quality KIC Wire Aftermarket gauge compatibility Designed In the USA. Stock photos may not be an exact representation of the item. Please read all product info, descriptions and terms before purchasing. All of your items fit in one box. The item “1964 1970 FORD MUSTANG / COMET / FALCON Wire Harness Upgrade Kit fits painless” is in sale since Monday, October 09, 2017. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Charging & Starting Systems”. The seller is “steveshouseospeed” and is located in Patterson, New York. This item can be shipped worldwide.
  • Brand: Keep It Clean
  • Manufacturer Part Number: 1230524

67-68 Mustang Classic Update Series Complete Body & Interior Wiring Harness Kit

67-68 Mustang Classic Update Series Complete Body & Interior Wiring Harness Kit

67-68 Mustang Classic Update Series Complete Body & Interior Wiring Harness Kit

Classic Update Wiring Harness Kit. Brand New Reproduction Wiring Harness Kit. The “Classic Update” wiring kits are made for the restoration enthusiast who wants some modern amenities in their classic vehicle. These kits include everything you need to modernize your classic vehicle: Headlight, Dimmer, and Ignition Switches; Boots, Tubes, and Grommets; Relays, and Flashers; Original Connectors, Terminals, and Disconnects. These kits are specifically made for the listed application and are not a universal designed kit! Manufactured by American Auto Wire. These kits are recommended for MODIFIED original vehicles, not OEM restoration projects. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered Halogen headlights. Complete wiring for all running lights, brake lights and directional lights, and license lights and third brake lights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO Fusebox fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead and ground wires with proper focal length light sockets, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Color schematics and easy to understand installation instructions included. Please note: Classic Update Kits do not support Ammeters. Fits the following models. 1967 – 1968 Mustang. T o Understand Why we have Pre-Sell Listings. The item “67-68 Mustang Classic Update Series Complete Body & Interior Wiring Harness Kit” is in sale since Tuesday, July 05, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Body Kits”. The seller is “tamraz” and is located in Naperville, Illinois. This item can be shipped worldwide.
  • Brand: American Autowire
  • Manufacturer Part Number: 510055
  • Placement on Vehicle: Front
  • Warranty: Yes
  • Country/Region of Manufacture: United States

65-73 Ford Mustang 21 Circuit Universal Wiring Harness Wire Kit XL WIRES

65-73 Ford Mustang 21 Circuit Universal Wiring Harness Wire Kit XL WIRES

65-73 Ford Mustang 21 Circuit Universal Wiring Harness Wire Kit XL WIRES

65-73 Ford Mustang 21 Circuit Universal Wiring Harness Wire Kit XL WIRES

New 65-73 Ford Mustang 21 Circuit Universal Wiring Harness Wire Kit XL WIRES. Brand new A-TEAM PERFORMANCE 21 circuit wire kit. This is a complete Bumper to Bumper wire kit, it will have more than enough wire for your project. Wires are marked every 12 to help with. This kit has circuits for Radio, Coil, Dome Light, ACC 1, Headlights, Door Locks, Cigarette Lighter, Wipers, ACC 2, Stop Lights, Fuel Pump, Gauges, Hazard, Power Windows, A/C Heater, Electric Fan, Backup/Cruise, Radio and Turn signal. This Wiring Kit Contains the Following. 1 Pre-Wired Fuse Panel w/ 17 Fuses and 1 Breaker. 2 Signal Flashers and 1 Pre-Wired Relay Connector w/ Horn Relay. 2 Pre-Wired Headlight Plugs. 1 Pre-Wired Late GM Alternator Plug. 2 GM Turn signal connectors for the Pre-Terminated Wires. 30+ Insulated Terminals and Small Cable Ties. 2 Loose Wires (Neutral Safety Switch Wire and Panel Light Wire). This wiring kit features a thick coating over the copper wire. The gauge of the wiring ranges from 10 gauge to 18 gauge depending on what the wire is for. The wires are GM color coded and, labeled. This complete wiring harness is perfect for almost any car or truck project. It includes detailed installation instructions. It is Great for most Street Rods, Classic Cars and, Hot Rods. The item “65-73 Ford Mustang 21 Circuit Universal Wiring Harness Wire Kit XL WIRES” is in sale since Saturday, December 24, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Engines & Components\Other”. The seller is “southwestperformancepartsllc” and is located in Sun City, Arizona. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
  • Manufacturer Part Number: 21 CIRCUIT KIT
  • Part Brand: A-TEAM PERFORMANCE

Incoming search terms:

  • mangpro wiring harness

Ford Performance Mustang 5.0l 302 351w Multiport Efi Wire Harness M-12071-a50

Ford Performance Mustang 5.0l 302 351w Multiport Efi Wire Harness M-12071-a50

302/351W MULTIPORT EFI WIRING HARNESS. Can be easily adapted to many other Ford V8 pushrod engines. Easy installation; Uses a single connector for all required connections. Kit consists of a single harness with integral connections for injectors and O2 sensors. Fully loomed, from PCM to all sensors and injectors, to save time on installation. Typical installation takes less than 1 hour. Compatible with engines using both H. Provisions for electric fan control output. Kit includes compact fuse and relay box, “Check Engine” light, and all necessary grommets. The item “FORD PERFORMANCE MUSTANG 5.0L 302 351W MULTIPORT EFI WIRE HARNESS M-12071-A50″ is in sale since Wednesday, February 19, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “rbracingford” and is located in Salem, Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: FORD PERFORMANCE
  • Manufacturer Part Number: M-12071-A50
  • Warranty: No
  • Country/Region of Manufacture: United States
  • Country of Manufacture: United States
  • Part Brand: FORD RACING
  • OE Spec or Performance/Custom: Performance/Custom
  • Fitment Type: Performance/Custom

1966 Ford Mustang NOS Under Dash Wire Harness C6ZZ-14401-F Shelby 289 K Code 66

1966 Ford Mustang NOS Under Dash Wire Harness C6ZZ-14401-F Shelby 289 K Code 66

1966 Ford Mustang NOS Under Dash Wire Harness C6ZZ-14401-F Shelby 289 K Code 66

1966 Ford Mustang NOS Under Dash Wire Harness C6ZZ-14401-F Shelby 289 K Code 66

1966 Ford Mustang NOS Under Dash Wire Harness C6ZZ-14401-F Shelby 289 K Code 66

NOS 1966 Ford Mustang under dash wire harness for all 6 and 8 cylinders including Shelby and K code Mustangs. Original Ford box included. I don’t see any defects at all. It’s a very rare part and in beautiful condition. Check out my other auctions for other rare 65-66 Mustang parts. The item “1966 Ford Mustang NOS Under Dash Wire Harness C6ZZ-14401-F Shelby 289 K Code 66″ is in sale since Saturday, October 15, 2016. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Accessories”. The seller is “21.04″ and is located in Layton, Utah. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.

1964-66 Ford Mustang American Autowire Wiring Harness

1964-66 Ford Mustang American Autowire Wiring Harness

1964-66 Ford Mustang American Autowire Wiring Harness

As the owner of a classic, you know adding amenities is very limited with OE wiring. These kits include all you need to modernize and upgrade your classic vehicle and are made in the USA specific for your year, make and model. Now you can easily add power accessories such as windows, fuel injection, air conditioning and more easily. Order your kit today. This kit will not support the use of factory AC or tach. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered Halogen headlights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO Fusebox fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument Cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead wires with proper molded light socket connections, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Made in the U S A! The item “1964-66 Ford Mustang American Autowire Wiring Harness” is in sale since Tuesday, August 11, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “pstbay” and is located in Boonton, New Jersey. This item can be shipped worldwide.
  • Manufacturer Part Number: 510125
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Brand: American Autowire

1969 Ford Mustang American Autowire Wiring Harness

1969 Ford Mustang American Autowire Wiring Harness

1969 Ford Mustang American Autowire Wiring Harness

As the owner of a classic, you know adding amenities is very limited with OE wiring. These kits include all you need to modernize and upgrade your classic vehicle and are made in the USA specific for your year, make and model. Now you can easily add power accessories such as windows, fuel injection, air conditioning and more easily. Order your kit today. Keys not included in this kit. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered halogen headlights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO fuse box fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for adapting a stock 1969 Ford Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead and ground wires with proper focal length light sockets, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. All required hardware supplied. Made in the U S A! The item “1969 Ford Mustang American Autowire Wiring Harness” is in sale since Friday, August 07, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “pstbay” and is located in Boonton, New Jersey. This item can be shipped worldwide.
  • Manufacturer Part Number: 510177
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Brand: American Autowire

1967-68 Ford Mustang American Autowire Wiring Harness

1967-68 Ford Mustang American Autowire Wiring Harness

1967-68 Ford Mustang American Autowire Wiring Harness

As the owner of a classic, you know adding amenities is very limited with OE wiring. These kits include all you need to modernize and upgrade your classic vehicle and are made in the USA specific for your year, make and model. Now you can easily add power accessories such as windows, fuel injection, air conditioning and more easily. Order your kit today. Keys not included in this kit. Correct replacement headlight switch with internal circuit breaker. Original Ford styled headlight switch connector. Headlight enhancement relays allow you to run high-powered halogen headlights. Complete wiring for all running lights, brake lights and directional lights, and license lights and third brake lights. Separate relay controlled circuit for cars that have stock or aftermarket fog or driving lamps. Correct replacement ignition switch for use with your original bezel and tumbler. Correct original ignition switch connector. Standard turn signal flasher and hazard flasher mounted on fuse panel; horn relay mounted on harness. New ATO fuse box fits in center of the firewall away from heater and A/C ducts and allows for easy fuse and circuit breaker accessibility. Harness allows for most after market accessories such as; gauge packages, heat and air conditioning systems, power windows, etc. All required hardware supplied. Original switch connector bodies! (Exclusive to American Autowire). Steering column connectors will plug directly into most after market steering columns. Directions and an adapter with terminals are included for running a stock Mustang steering column. Separate optional under-dash light sockets along with original dome/interior light wiring. Instrument cluster wiring is designed with a cluster harness disconnect system for easy service and assembly. The best aspect of the disconnect system is that any gauge cluster package can be easily and neatly wired in. This includes AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, and VDO just to name a few. Rear body harness assembly plugs into the main harness behind the left hand kick panel for easy accessibility and allows for original or custom routing. Rear body wiring includes backup light lead and ground wires, stop and tail light lead and ground wires with proper focal length light sockets, third brake light wire and the correct license plate lead connection for use with your stock tag lamp. Fuel tank sender wire and sending unit extension are included. New floor dimmer switch is provided. Wire length and connection accommodate original floor mount dimmer switch location. Engine wiring includes feeds for coil, tach, water temperature, oil pressure, brake warning (with later updated extension if necessary), and electronic speedometer (if necessary). A heavy gauge alternator feed wire is provided for a typical 1 wire high-powered installation. Front lighting includes extra long leads for special routing when custom under hood appearance is desired. All headlight, park light, fog light, and directional light leads are provided, as well as a switched trigger wire for electric fan relay (usually recommended with AC). Color schematics and easy to understand installation instructions included. Made in the U S A! The item “1967-68 Ford Mustang American Autowire Wiring Harness” is in sale since Wednesday, August 05, 2015. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Other Parts”. The seller is “pstbay” and is located in Boonton, New Jersey. This item can be shipped worldwide.
  • Manufacturer Part Number: 510055
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Brand: American Autowire