Land Rover Defender 90 110 130 Puma heated seat wiring kit switch loom harness

Land Rover Defender 90 110 130 Puma heated seat wiring kit switch loom harness

2 x Genuine YUF 500150LNF heated front seat switches to suit Land Rover Defenders made from 2007 until 2016. This is the Tdci or “Puma” engine Defender with either the 2.2 or 2.4 engine complete with a pre made wiring loom with one end to plug into the switch and the opposite end will plug into any genuine Land Rover Defender heated seat. The power in and out cables are approx 3.0m long so can reach easily to the battery box and to each seat. At the seat end the cable is fitted with the Land Rover OE heated seat connector so plugs directly into the seat harness. The illumination and negative cables from the switch are 0.5m long so are suitable for splicing into an existing adjacent switch, the power in and power out cables are 3200mm long. When factory fitted heated seats run from fuse position 33, this is not normally wired so a connection to an ignition live would be required in order to operate the seats. To save time and make the installation easier we offer a kit with a small box which is connected directly to the battery and when the engine is running allows power through to the seats to save connecting into any existing circuits. The cables are colour coded to match the OEM Defender wiring. The switches are genuine Land Rover but supplied in our packaging. If you have a Land Rover Defender Td5 made between 2002 and 2006 go here. As this requires different switches. The item “Land Rover Defender 90 110 130 Puma heated seat wiring kit switch loom harness” is in sale since Tuesday, October 4, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Switches”. The seller is “mobilecentre” and is located in Evesham. This item can be shipped worldwide.
  • Model/ Series: All Models
  • Manufacturer Part Number: 11DTD4HSK6
  • Brand: Mobile Centre

Land Rover Defender 90 110 130 Td4 heated seat wiring kit switch loom harness

Land Rover Defender 90 110 130 Td4 heated seat wiring kit switch loom harness

2 x Genuine YUF 500150LNF heated front seat switches to suit Land Rover Defenders made from 2007 until 2016. This is the Tdci or “Puma” engine Defender with either the 2.2 or 2.4 engine complete with a pre made wiring loom with one end to plug into the switch and the opposite end will plug into any genuine Land Rover Defender heated seat. The power in and out cables are approx 3.0m long so can reach easily to the battery box and to each seat. At the seat end the cable is fitted with the Land Rover OE heated seat connector so plugs directly into the seat harness. The illumination and negative cables from the switch are 0.5m long so are suitable for splicing into an existing adjacent switch, the power in and power out cables are 3200mm long. When factory fitted heated seats run from fuse position 33, this is not normally wired so a connection to an ignition live would be required in order to operate the seats. To save time and make the installation easier we offer a kit with a small box which is connected directly to the battery and when the engine is running allows power through to the seats to save connecting into any existing circuits. The cables are colour coded to match the OEM Defender wiring. The switches are genuine Land Rover but supplied in our packaging. If you have a Land Rover Defender Td5 made between 2002 and 2006 go here. As this requires different switches. The item “Land Rover Defender 90 110 130 Td4 heated seat wiring kit switch loom harness” is in sale since Saturday, July 25, 2015. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Switches”. The seller is “mobilecentre” and is located in Evesham. This item can be shipped worldwide.
  • Model/ Series: All Models
  • Manufacturer Part Number: 11DTD4HSK6
  • Brand: Mobile Centre

Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit

Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit

Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit

Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit

Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit

I have modify a new EW 7975 harness for a battery in the seat post to get rid that the ugly Di2 battery on the frame. If you’re building a new Di2 bike this is a clean way to finish off the build. This kit includes a internal modified harness, seat post battery, 2 grommets, 4 shrink sleeve, plug removal tool, and harness. Please indicate size and type of frame at checkout. This modified version can be custom build to any buyers special. Special hard to fit frames like some Look, Cervelo, Felt. And any custom frame… Just tell me what length for any section and I’ll make it. DOES NOT REQUIRE YOU TO REMOVE THE SEAT POST TO RECHARGE THE BATTERY! It charges through the harness via. FD/RD(4pin) harness plug, it can also charge any standard Shimano battery without removing the battery, so if you have another bike with the standard Di2 battery you can charge with this charger as well. If you are looking for Ultegra see my other listing. New size battery is a smaller round battery 800mah, will last 5-7 months on one charge 40 grams, 0.748″ (19mm) diameter x 3.6 ” battery can be placed anywhere in the frame, seat tube, down tube, doesn’t matter where you place the battery since it does not need to be removed to charge. High discharge rate capacity. 7.4V 650mAh 14500 li ion battery. Discharge from 4.2V to 3.0V at 0.2C mA. Charge with constant current 1C to 4.2V, then charge with constant voltage 4.2V till charge current is less than 0.01C. 3.0 V, the over-discharge detection voltage of PCM. Charging, 0°C 45°C ; 65±20%RH. Storage for a long time(>3 months) and the storage condition shall be. Charger for 7.2V/7.4V Li-ion or Li-Polymer rechargeable battery Pack connected by 2 cells in series. Automatic stop after full charged. Light is green: power on (standby) or full charged. Light is red: in charging. DC 8.4V 500mA Max. This battery will fit in all 26.8 seat post AND LARGER. If you can fit a AA battery in your post with a little wiggle room, than this battery will fit. I also do custom installs on non Di2 specific frames using a complete internal harness, if you need my service just ask. If you need a complete internal harness with this option, with the battery in the seat post (see my other listing). I have an option for just the battery in the seat post if you already have a bike with an internal harness (see my other listing for just the cable). Note: wire and connector color varies, depending on what I have in stock. To install the battery. Apply electrical tape around the battery so it fits snug inside your seat post (see pictures). Push it in I provided zip-tie around the battery for removal see pic. Plug the battery connector into the seat tube cable coming out the top of the seat tube in the frame. Put the seat post back in the bike, and your ready to ride. Seat post not included. Battery can only be charged through the harness! Your kit will arrive soon and the battery is fully charged, but some time next year it will need to be recharged please follow these instructions, and always remember to unplug both front and rear derailleurs when charging just to be safe. Plug the charger plug into the front junction plug of the harness if your charger plug has 5 pins, if it has 4 pins it plugs into the rear derailleur. Your kit will arrive soon and the battery is fully charged, but some time next year it will need to be recharged please follow these instructions, for EU buyers due to the unstable 240ac power systems. Always remember to unplug both front and rear derailleurs, or use a surge protector when charging just to be safe. The light on the charger will be red when charging, green when charged, 60-90 minutes. To check the battery level. Press and hold either shifting switch for 0.5 seconds or more. You can check the amount of battery charge remaining using the. Battery indicator on top of junction (A). 100 % Illuminates green (for 2 seconds). 50 % Flashes green (5 times). 25 % Illuminates red (for 2 seconds). 0 % Flashes red (5 times). When the battery charge is low, first the front derailleur will stop operating, and then the rear derailleur will. When the battery is fully spent, the derailleurs will stop at the positions where they were last. If the battery indicator is illuminated red, it is recommended that you recharge the battery as. As is the case with ALL Lithium-ion rechargeable batteries running them completely dead can damage the battery, including the OEM Shimano battery. If this happens it may not be possible to charge the battery without removing it, and although it MAY be possible to revived the the battery, the cells may still be damaged, and the battery may run dead in a matter of days… So it is your responsibility to check your battery and recharge it before it goes completely dead. Nternational Buyers Please Note. The item “Shimano Dura-Ace Di2 7970 EW-7975 Modified Internal Wiring Seat Post Battery Kit” is in sale since Tuesday, October 27, 2020. This item is in the category “Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components”. The seller is “eapathome” and is located in Altadena, California. This item can be shipped worldwide.
  • Battery Type: Lithium Ion (Li-Ion)
  • Compatible Brand: Shimano
  • Color: Black
  • Part Type: Harness
  • Brand: Di2diy
  • Set Includes: Seatpost Battery

Land Rover Defender 90 110 130 heated seat wiring loom harness Td5 2002 2006

Land Rover Defender 90 110 130 heated seat wiring loom harness Td5 2002 2006

SEATS ARE NOT SUPPLIED THIS IS THE WIRING LOOM ONLY. Land Rover Defender Td5 made from 2002 until 2006 wiring loom with IGNSENS to suit YUG 102430 & YUG 102440 heated front seat switches fitted with OEM Land Rover heated seat connectors. The illumination and negative cables are 500mm long so are suitable for splicing into an existing switch. The power in and out cables are 3200mm long so can reach easily to the battery box and to each seat. When seats are fitted in the factory fuse position 33 is used and normally not wired unless seats were fitted so this kit is supplied with out 23IGNGEN02. To make the install easier we supply a small box which is wired directly to the battery and provides outputs for the left and right seat which are only live when the engine is running. The cables are colour coded to match the OEM Defender wiring and will plug straight into the original Land Rover heated seats as fitted from 2002 and will only require a suitable earth connection for the black wire. This listing is for TWO harnesses and switches. If you have a Td4 Tdci Defender made between 2007 and 2016 go here. The item “Land Rover Defender 90 110 130 heated seat wiring loom harness Td5 2002 2006″ is in sale since Tuesday, September 18, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Switches”. The seller is “mobilecentre” and is located in Evesham. This item can be shipped worldwide.
  • Country/Region of Manufacture: United Kingdom
  • Model/ Series: All Models
  • Manufacturer Part Number: 11DTD5HSK7
  • Brand: Mobile Centre

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

BLUETOOTH WIRING HARNESS CABLE. MFD3 RNS510 RCD510 MODELS. AND 9W2, 9W7 ETC BLUETOOTH MODULES. Suitable for the following VW / Audi Bluetooth handsfree. 1Z0035729 A / B / C / D. 5N0035730 A / B / C / D. RNS 510 RNS 315 / RNS 310 / MFD 3 / RCD 510, etc. Specific set of cables for the retrofit of an original Bluetooth handsfree kit, version “Bluetooth Only “. Parts needed in addition. Original Bluetooth control unit. While using the loom for the rSAP Premium hands free an additional antenna loom is needed. Uncomplicated installation of the handsfree due to exact manufactured cables. There is no difference to the OEM handsfree from factory. High quality audio output (also at high speeds). Place, accept and terminate calls. Set of cables plug & play. Not suitable for head units with ISO connection – Only for head units with Quadlock connection. Please obey the compatibilty to your bluetooth cellphone (compatibility list from VW). You can find a detailed description of functions of the handsfree in the Infotainment manual of the car, chapter name, tel. NOW FOR THE BORING BIT. The item “VW SEAT GENUINE SKODA BLUETOOTH WIRING HARNESS CABLE MFD3 RNS510 RCD510 MODELS” is in sale since Sunday, October 22, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “partsdealers234″ and is located in Gatwick. This item can be shipped worldwide.
  • Brand: VW
  • Manufacturer Part Number: Does Not Apply
  • Manufacturer: Volkswagen

Genuine Vw Seat Skoda MDI Media In Wiring Harness Cable Mfd3 Rns510 Rcd510

Genuine Vw Seat Skoda MDI Media In Wiring Harness Cable Mfd3 Rns510 Rcd510

RNS510/ RCD510/ RNS315/ RCD310 / RNS310. VW / SKODA / SEAT. Harness length: 1.8M. FOR CONNECTING YOUR AUDIO UNIT WITH MDI UNIT. The factory fitted AUX-IN connector will be work. Device control (depending of audio source) as well as track information on radio screen. NOW FOR THE BORING BIT. The item “GENUINE VW SEAT SKODA MDI MEDIA IN WIRING HARNESS CABLE MFD3 RNS510 RCD510″ is in sale since Tuesday, October 3, 2017. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Terminals & Wiring\Audio Interface Cables”. The seller is “partsdealers234″ and is located in Gatwick. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Unit Quantity: 1
  • Brand: VW

Genuine Vw Seat Skoda Bluetooth + MDI Wiring Harness Cable Mfd3 Rns510 Rcd510

Genuine Vw Seat Skoda Bluetooth + MDI Wiring Harness Cable Mfd3 Rns510 Rcd510

Genuine Vw Seat Skoda Bluetooth + MDI Wiring Harness Cable Mfd3 Rns510 Rcd510

Genuine Vw Seat Skoda Bluetooth + MDI Wiring Harness Cable Mfd3 Rns510 Rcd510

BLUETOOTH WIRING HARNESS CABLE. MFD3 RNS510 RCD510 MODELS. AND 9W2, 9W7 ETC BLUETOOTH MODULES. Suitable for the following VW / Audi Bluetooth handsfree. 1Z0035729 A / B / C / D. 5N0035730 A / B / C / D / E / J. RNS 510 RNS 315 / RNS 310 / MFD 3 / RCD 510, etc. Specific set of cables for the retrofit of an original Bluetooth handsfree kit, version “Bluetooth Only “. Parts needed in addition. Original Bluetooth control unit. While using the loom for the rSAP Premium hands free an additional antenna loom is needed. Uncomplicated installation of the handsfree due to exact manufactured cables. There is no difference to the OEM handsfree from factory. High quality audio output (also at high speeds). Place, accept and terminate calls. Set of cables plug & play. Not suitable for head units with ISO connection – Only for head units with Quadlock connection. Please obey the compatibilty to your bluetooth cellphone (compatibility list from VW). You can find a detailed description of functions of the handsfree in the Infotainment manual of the car, chapter name, tel. VW IPOD / IPHONE MEDIA IN MDI UNIT WIRING HARNESS. NOW FOR THE BORING BIT. The item “GENUINE VW SEAT SKODA BLUETOOTH + MDI WIRING HARNESS CABLE MFD3 RNS510 RCD510″ is in sale since Friday, November 17, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “bargainhunter3210″ and is located in Gatwick. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: VW
  • Unit Quantity: 1
  • Manufacturer: Volkswagen

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

Vw Seat Genuine Skoda Bluetooth Wiring Harness Cable Mfd3 Rns510 Rcd510 Models

BLUETOOTH WIRING HARNESS CABLE. MFD3 RNS510 RCD510 MODELS. AND 9W2, 9W7 ETC BLUETOOTH MODULES. Suitable for the following VW / Audi Bluetooth handsfree. 1Z0035729 A / B / C / D. 5N0035730 A / B / C / D / E / J / E / K etc. RNS 510 RNS 315 / RNS 310 / MFD 3 / RCD 510, etc. Specific set of cables for the retrofit of an original Bluetooth handsfree kit, version “Bluetooth Only “. Parts needed in addition. Original Bluetooth control unit. While using the loom for the rSAP Premium hands free an additional antenna loom is needed. Uncomplicated installation of the handsfree due to exact manufactured cables. There is no difference to the OEM handsfree from factory. High quality audio output (also at high speeds). Place, accept and terminate calls. Set of cables plug & play. Not suitable for head units with ISO connection – Only for head units with Quadlock connection. Please obey the compatibilty to your bluetooth cellphone (compatibility list from VW). You can find a detailed description of functions of the handsfree in the Infotainment manual of the car, chapter name, tel. NOW FOR THE BORING BIT. The item “VW SEAT GENUINE SKODA BLUETOOTH WIRING HARNESS CABLE MFD3 RNS510 RCD510 MODELS” is in sale since Friday, November 17, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “bargainhunter3210″ and is located in Gatwick. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: VW
  • Manufacturer: Volkswagen

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033m

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033m

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033m

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033m

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033m

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033m

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033m

Item listed is a new genuine adapter cable loom injection nozzle OE part number 03G 971 033 M and applies to the following brands and their respective models within the years listed for a more accurate reading please refer to vehicle compatibility NB Part is also influence by model engine code and VIN number i will be glad to assist to choose correct one for you simply ask for help. GOLF 2006 – 2009 JETTA 2006 – 2008. A3 2004 – 2008 A4 2005 – 2008 A4 QUATTRO 2005 – 2008. The application data supplied serves as guide only. If you are not sure of compatibility please ASK and forward me your registration number or your chassis (VIN) number and i will gladly confirm. AS I have the latest up to date electronic parts Catalogues. The item “NEW GENUINE VW AUDI SEAT SKODA DIESEL INJECTOR WIRING LOOM 03G971033M” is in sale since Saturday, August 19, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Intake & Fuel Delivery\Fuel Injection Parts”. The seller is “1avit1″ and is located in Berkshire. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.
  • Placement on Vehicle: Front
  • Brand Type: Genuine OEM
  • Manufacturer Part Number: 03G971033M
  • Country/Region of Manufacture: Germany
  • Reference OE/OEM Number: ADAPTOR CABLE LOOM
  • Unit Type: Unit
  • Other Part Number: 03G971033M
  • Unit Quantity: 1
  • Brand: VAG (Genuine OE)
  • Type: Wiring Harness
  • Modified Item: No
  • Classic Car Part: No

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

New Genuine Vw Audi Seat Skoda Diesel Injector Wiring Loom 03g971033l

Item listed is a new genuine adapter cable loom injection nozzle OE part number 03G 971 033 L and applies to the following brands and their respective models within the years listed for a more accurate reading please refer to vehicle compatibility or simply ask for help. GOLF 2004 – 2009 GOLF PLUS 2005 – 2009 JETTA 2006 – 2011 T. OURAN 2006 – 2010. A3 2004 – 2008 A4 2005 – 2008 A4 QUATTRO 2005 – 2008 A6 2005 – 2008 A6 QUATTRO 2005 – 2008. ALTEA 2007 – 2013 LEON 2006 – 2013 TOLEDO 2005 – 2009. OCTAVIO 2004 – 2013 SUPERB 2008 – 2013. The application data supplied serves as guide only. If you are not sure of compatibility please ASK and forward me your registration number or your chassis (VIN) number and i will gladly confirm. AS I have the latest up to date electronic parts Catalogues. The item “NEW GENUINE VW AUDI SEAT SKODA DIESEL INJECTOR WIRING LOOM 03G971033L” is in sale since Tuesday, November 15, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Intake & Fuel Delivery\Fuel Injection Parts”. The seller is “1avit1″ and is located in Berkshire. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.
  • Manufacturer Part Number: 03G971033L
  • Modified Item: No
  • Country/Region of Manufacture: Germany
  • Custom Bundle: No
  • Reference OE/OEM Number: ADAPTOR CABLE LOOM
  • Unit Type: Unit
  • Other Part Number: 03G133033L
  • Unit Quantity: 1
  • Brand: VW
  • Non-Domestic Product: No
  • Placement on Vehicle: Front
  • Brand Type: Genuine OEM
  • Type: Wiring Harness