99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro

METRA 99-3010S-LC AFTERMARKET DOUBLE OR SINGLE DIN RADIO INSTALL KIT FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO STRIPPED DOWN WITH JUST THE BASICS (RAP RETENTION & ACCESSORY POWER). This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. This Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. If you would like a complete set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING for this kit. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). AFTERMARKET RADIO INSTALLATION KIT. PAINTED SILVER TO MATCH FACTORY COLOR AND TEXTURE. TURBO2 RADIO INSTALL DASH KIT. DIN Head Unit Provision with Pocket. ISO DIN Head Unit Provision with Pocket. Double DIN Head Unit Provision. ISO Stacked Head Unit Provision. Stripped Down Version with just the Basics Retains R. P and Accessory Power. Comprehensive Instruction Manual, Including Step-By-Step Disassembly and Assembly. (1) 99-3010S Metra Radio Trim Panel. (1) ISO Trim Plate. (2) Double DIN Brackets. (1) Double DIN Trim Plate. (1) 20-Pin GM Harness. This ITEM ships FREE in the (48 States) Contiguous U. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-3010S-LC Car Stereo Single & Double Din Radio Install Dash Kit for Camaro” is in sale since Wednesday, November 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam.
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Supported Radio Sizes: Double Din, 2 ISO Din Radios, ISO Din with Pocket
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Interchange Part Number: ISO Din Aftermarket Trim Plate & Wiring Harness
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!
  • Color: Painted Silver to Match Factory Color & Finish
  • Manufacturer Part Number: Metra 99-3010S-LC
  • Placement on Vehicle: Front
  • Other Part Number: 2-Din Installation Mounting Panel & Wire Interface
  • Brand: Metra 99-3010S-LC CD Player DVD Adapter Bezel

Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount

Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount

METRA 99-7510 NOT COMPATIBLE WITH CLIMATE CONTROLS. MUST HAVE STANDARD A/C AND HEATER CONTROLS. AFTERMARKET SINGLE DIN RADIO INSTALL KIT. FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO. THIS ITEM IS 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. This Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. If you would like a complete set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING for this kit. Factory Sealed Packaging and 100% BRAND NEW! (Additional Features and Item Specifics Below). AFTERMARKET RADIO INSTALLATION KIT. NOT COMPATIBLE WITH ELECTRONIC CLIMATE CONTROLS. AVAILABLE IN TWO FINISHES: HIGH GLOSS PIANO BLACK & MATTE BLACK. METRA TURBO2 RADIO INSTALLATION DASH KIT. DIN Radio Provision with Pocket. ISO Mount Radio Provision with Pocket. Includes Built-In Oversized Storage Pocket. Painted Matte Black to Match Factory Color and Finish. Retains Full Functionality Of Factory HVAC Controls. Put Your Own Text Within The Factory Display. Includes All Necessary Hardware For A Complete Install. Comprehensive Instruction Manual, Including Step-By-Step Disassembly and Assembly. (1) 99-7510 Metra Radio/ Climate Control Housing with Pocket. (1) ISO Trim Plate. (1) Hazard Switch Extension Cable. (1) Radio Harness, Plugs Into Car Harness at Radio. (1) Interface to OBDII Jumper Harness (Used with Navigation Features Only). (2) Climate Control Extension Harnesses. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “Metra 99-7510 Single Din Radio Install Dash Kit for RX-8 RX8, Car Stereo Mount” is in sale since Wednesday, November 2, 2011. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation, Dominican republic, El salvador.
  • Interchange Part Number: Aftermarket Trim Plate & Wiring Harness
  • Color: Painted Matte Black
  • Manufacturer Part Number: Metra 99-7510
  • Placement on Vehicle: Front
  • Other Part Number: Installation Mounting Panel & Wire Interface
  • Brand: Metra 99-7510 CD Player DVD Adapter Bezel
  • Supported Radio Sizes: Single Din & ISO Din Mount With Pocket
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!

99-7010 Car Stereo Single & Double-Din Radio Install Dash Kit for Eclipse with Amp

99-7010 Car Stereo Single & Double-Din Radio Install Dash Kit for Eclipse with Amp

FOR PREMIUM AMPLIFIED FACTORY SYSTEM RADIO REPLACEMENT. DOUBLE-DIN and SINGLE-DIN PROVISIONS INCLUDED (COMBO INCLUDES : DASH KIT and DATA BUS INTERFACE). This Item Is 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. Some “SELLERS” say they will send you what is “available” at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn’t you rather get what you paid for? Don’t fall for cheap substitutions that come in plain plastic bags, don’t fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). DASH KIT and DATA BUS INTERFACE. DIN Radio Provision with Pocket. ISO DIN Radio Provision with Pocket. Double DIN Radio Provision. Stacked ISO Mount Units Provision. Retains Factory Climate Controls in Original Locations. Quick-Release, Snap-In ISO Mount System with Custom Trim Ring. Removable Oversized Storage Pocket with Built-In Radio Supports. Contoured and Textured to Match the Factory Dash. METRA DATA BUS INTERFACE. Designed to be used in vehicles that have the Rockford Fosgate audio system. The MITO-01 supplies a digital signal to turn the amplifier on. Also eliminates the “COM ERROR” message on the display when the OEM radio is removed. The radios speaker wires will provide the audio for the dash and rear speakers. The RCA’s will provide the audio to the amplifier to power the door speakers and woofer. (1) Metra Radio Housing 99-7010. (1) ISO Trim Plate. (2) Double DIN Brackets. (1) Double DIN Trim Plate. (1) Removable Storage Pocket. (1) Metra MITO-01 Interface. (1) 14-Pin Harness with RCA’s. (1) Factory Radio Side Harness. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The free listing tool. The item “99-7010 Car Stereo Single & Double-Din Radio Install Dash Kit for Eclipse with Amp” is in sale since Wednesday, June 13, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Russian federation.
  • Special Notes: Compatible w/ Premium Amplified Systems Only
  • Interchange Part Number: 2-Din Aftermarket Trim Plate & Wiring Harness
  • Color: Painted Silver
  • Manufacturer Part Number: Metra 99-7010 + MITO-01
  • Placement on Vehicle: Front
  • Other Part Number: Installation Mounting Panel & Wire Plug
  • Brand: Metra 99-7010 D-Din CD Player DVD Adapter Bezel
  • Supported Radio Sizes: Double Din, 2 ISO Din Radios, Single Din w/ Pocket
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • International Buyers (Outside U.S.A.): International Buyers (Outside U.S.A.)

99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount

99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount

METRA 99-7803G AFTERMARKET DOUBLE OR SINGLE DIN RADIO INSTALL KIT FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO. THIS ITEM IS 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you’ll want to get the right parts with the best fit and finish, get genuine Metra Products. This Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. If you would like a complete set with Wiring Harness and Antenna Adapter (if required), please see the COMBO LISTING for this kit. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below). SHOWN IN DOUBLE DIN CONFIGURATION. SHOWN IN SINGLE DIN W/POCKET CONFIGURATION. AFTERMARKET RADIO INSTALLATION KIT. PAINTED GRAY TO MATCH FACTORY COLOR AND FINISH. METRA RADIO INSTALLATION DASH KIT. Double DIN Radio Provision. Single/ISO-DIN Provision with Pocket. Retains all Climate Control Systems Including Both Single-Zone and Dual-Zone. Painted Gray to Match Factory Color and Finish. (No Additional Harness Needed). ASWC (Steering Wheel Control Interface) Ready. Heavy Duty ABS Plastic Construction. (1) Metra 99-7803G Radio Housing Trim Panel. (2) Radio Mounting Brackets. (2) Panel Clip Legs. (2) Panel Clip s. (2) Speed Clip s. (4) #4 x 3/8 Phillips Screws. (2) #10 x 3/4 Phillips Screws. (8) #8 x 3/8 Truss Head Screws. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA). We are a U. To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item “99-7803G Single & Double Din Radio Install Dash Kit for Accord, Car Stereo Mount” is in sale since Friday, April 19, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.
  • Interchange Part Number: 2-Din Aftermarket Trim Plate & Wiring Harness
  • Color: Painted Gray
  • Manufacturer Part Number: Metra 99-7803G
  • Placement on Vehicle: Front
  • Other Part Number: ISO- Din Installation Mounting Panel & Wire Plug
  • Brand: Metra 99-7803G CD Player DVD D-Din Adapter Bezel
  • Supported Radio Sizes: ISO Din w/Pocket, Double Din, ISO Din Stacked
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios
  • International Buyers (Outside U.S.A.): Products Sold are for Vehicles in the USA Only!

Car Radio Stereo Single 2 Din Dash Kit Wire Harness for 2013-2017 Honda Accord

Car Radio Stereo Single 2 Din Dash Kit Wire Harness for 2013-2017 Honda Accord

Car Radio Stereo Single 2 Din Dash Kit Wire Harness for 2013-2017 Honda Accord

Kid’s & Video Games. Car Stereo Single Double Din Installation Dash Kit Radios. Compatible with Honda Accord 2013-Up vehicles. Accommodates ISO Single DIN mount. Accommodates ISO Double DIN mount. Retains factory color screen. Includes a storage pocket below for single DIN mounting. Designed and manufactured with precision tolerances. Painted two-tone to match factory dash color. Factory matched texture style. High-grade ABS plastic construction. Color: Black with silver accent. Local pick-up is available by appointment only, please inquire for more information. We are not responsible for any excess charges. Return for replacement within: 14 days. Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution. The item “Car Radio Stereo Single 2 Din Dash Kit Wire Harness for 2013-2017 Honda Accord” is in sale since Wednesday, March 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “coast_national_sales” and is located in Los Angeles, California. This item can be shipped worldwide.
  • Brand: Metra
  • Manufacturer Part Number: Does Not Apply
  • Custom Bundle: Yes
  • Fitment Type: Direct Replacement
  • Superseded Part Number: Metra 99-7804B
  • Other Dash Part: Scosche HA1717B
  • Interchange Antenna Part: Metra 40-HD10
  • Alternate Antenna Part: Best Kits HO-6 HO8
  • Other Antenna Part: Scosche HAA2B
  • Market Type: US Domestic Vehicles Only
  • Type: Installation car stereo dash kit Harness

Holden Hq Hj V8 Chev 350 Engine Single Headlight Wiring Loom Harness Looms

Holden Hq Hj V8 Chev 350 Engine Single Headlight Wiring Loom Harness Looms

Holden Hq Hj V8 Chev 350 Engine Single Headlight Wiring Loom Harness Looms

NEW REWIRED HOLDEN HQ HJ V8 350/ 454 CHEV Complete Engine & Single Headlight wiring harness. This wire harness has been rewired as per the STD Loom with new wires & terminals. This is a complete loom from fire wall plug forward. 8cl with internal reg & coil. The alt coil temp and oil sender wires are left long to be cut to suit your motor setup all crimps are. Supplied to be fitted makes a neater looking loom. This is used to replace old hard cracked STD engine looms. To be used in a performance application this loom does not have emission / aircon or idle solenoid wires. It has a 6mm main red (std one is 5mm) with a fusible link, 4mm headlight wire we use heat shrink & we solder the terminals. If you need emission wires and or idle solenoid wire in loom. Now made with wire colours as best we. To match the std gmh loom the loom will be fitted with H4 plugs these do fit the old school std headlights and have the parkers with the turn lights. (IF YOU SUPPLY YOUR OLD HEADLIGHT PLUGS LOOM CAN BE MADE TO SUIT). LOOM WILL BE SENT WITH NO MAIN PLUG (YOU REUSE YOURS) IF YOUR SUPPLY ONE it will be fitted. As this model loom was made so many ways as STD you will have to make sure this will fit you car and read all the listing. We allso need to know on what side of the main plug your wiper motor wires are on as some of the hq-j have them with the headlight loom and others are on the engine and if your loom uses a horn relay and twin horns etc. For headlight looms Unless you supply useable Std headlight plastic plugs This loom will be fitted with the newer H4 plug these do fit the std headlight but has no parkers in with the headlights or you can send us your ones to be fitted. Photos are for display purposes only. The item “HOLDEN HQ HJ V8 CHEV 350 ENGINE SINGLE HEADLIGHT WIRING LOOM HARNESS LOOMS” is in sale since Saturday, August 18, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Headlights”. The seller is “capri1276″ and is located in Mooroolbark, VIC. This item can be shipped worldwide.
  • Compatible Makes: Holden
  • Manufacturer: NKAParts
  • Product Type: Wiring loom
  • Holden Series: HQ HJ
  • Modified Item: No
  • Custom Bundle: No
  • Non-Domestic Product: No
  • Manufacturer Part Number: Does Not Apply

99-7524B Single & Double Din Radio Install Dash Kit for Mazda 6 Car Stereo Mount

99-7524B Single & Double Din Radio Install Dash Kit for Mazda 6 Car Stereo Mount

99-7524B Single & Double Din Radio Install Dash Kit for Mazda 6 Car Stereo Mount

99-7524B Single & Double Din Radio Install Dash Kit for Mazda 6 Car Stereo Mount

99-7524B Single & Double Din Radio Install Dash Kit for Mazda 6 Car Stereo Mount

(PLEASE CHECK VEHICLE APPLICATIONS CHART AND EXCLUSIONS). For Use When Replacing the Factory OEM Radio With an Aftermarket Single or Double-Din Radio. THIS ITEM IS 100% BRAND NEW! Aftermarket Single & Double-DIN Radio Installation Kit. New (Factory Sealed Packaging). Painted Charcoal Black to Match Factory Color and Finish. With 7×4 Inch Double Din Radios (See Notes Below). Recently Some Radio Manufacturers started making Double Din Radios with 7 Inch Screens (some slightly smaller). These Double Din Radios are about (7″ W x 4″ H) 7 inches wide by 4 inches tall. Unfortunately this new size “DOES NOT” work with Metra Installation Kits without some modifications. Some of these kits have been manufactured for many years before this new size radio became available. As far as we know, none of the Aftermarket Kit Manufacturers are using this new size opening at this time. The Standard Radio Opening for this kit is approximately (6 7/8 in x 3 7/8 in) or (173mm x 98mm). If you have one of these larger radios, you will need to “SAND” or “FILE” the opening of the TRIM RING or BEZEL to make it large enough to clear the “FACE” of your radio. Unfortunately at this time there are no other alternatives that we know of. AN EXPLANATION OF DIFFERENT TYPES OF RADIOS AND COMPATIBILITY. ” NOT COMPATIBLE ” WHEN INSTALLING A FACTORY OEM RADIO OR ATTEMPTING A FACTORY RADIO SWAP. ” COMPATIBLE ” WHEN INSTALLING AN AFTERMARKET DOUBLE DIN RADIO. A DOUBLE DIN RADIO IS ABOUT 7 X 4 INCHES IN SIZE. ” COMPATIBLE ” WHEN INSTALLING (2) STACKED ISO-DIN RADIOS TOGETHER. SEE ISO-DIN DESCRIPTION BELOW, BOTH UNITS SHOULD MATCH DESCRIPTION BELOW. ” WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITH THE USE OF A RADIO SLEEVE OR CAN (USUALLY PROVIDED WITH YOUR RADIO). A SINGLE DIN RADIO IS ABOUT 7 X 2 INCHES IN SIZE AND HAS A METAL SLEEVE AROUND THE FIRST 3 INCHES OF THE RADIO. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITHOUT ” THE USE OF A RADIO SLEEVE OR CAN, UNIT IS SCREW MOUNTED, MUST HAVE MOUNTING HOLES ON SIDE OF CHASSIS. UNIT IS A SINGLE DIN RADIO ABOUT 7 X 2 INCHES IN SIZE. If you are not sure if your radio will work with this kit. Please use the “ASK A QUESTION” link on the bottom of the page. Please include your Radio Brand and Model Number for faster service. SINGLE & DOUBLE DIN. Double Din Radio Provision. ISO Din Radio Provision. Retains Both Manual & Electronic Climate Control Systems. Heavy Duty ABS Plastic Construction. All Necessary Hardware Included for Easy Installation. Before you replace your factory radio with your New Aftermarket Radio, make sure you get the same parts a Professional Installer would use. Whether you’re installing an Alpine, Blaupunkt, Clarion, Dual, Jensen, JVC, Kenwood, Panasonic, Pioneer, Sony, Soundstream, Valor or another stereo, you’ll want to get the right parts with the BEST Fit and Finish. Don’t be fooled by cheap or generic brands, only use Genuine Metra Products. Do you have Steering Wheel Controls like Volume, Track and Seek Buttons? Are these used on a daily basis? Maybe during a morning or evening commute? If so, the ASWC-1 Steering Wheel Control Interface might be the perfect addition. It works with most major brands like Alpine, Clarion, Kenwood, Pioneer, Sony and more. Please see the ASWC-1 LISTING. For complete list of brands and details. If you have any questions, kindly use the “ASK A QUESTION” link on the bottom of the page. (1) METRA 99-7524B Radio/Climate Control Housing. (2) ISO Mounting Brackets. (1) Radio Wiring Harness. (1) Climate Control / Accessory Harness. (4) #8 x 3/8 Phillips Screws. (2) #8 x 1 Phillips Screws. This ITEM ships “FREE” in the U. Protectorates and APO/FPO Addresses. Must have a valid U. We provide our services as a courtesy to all International Buyers. We are a U. Although these parts work with many vehicles outside the U. To research whether the part they are ordering will MATCH , FIT , WORK or is COMPATIBLE with their vehicle before purchasing. We suggest you check the online forums for your particular vehicle, normally you will find someone who has already posted on this topic and provided the needed information. We apologize, we cannot join every forum to do this. We do our very best to correctly represent all items we sell. Unfortunately, sometimes there may be incidents beyond our control. We realize this can be very frustrating and upsetting, but if you give us a chance, you might be pleasantly surprised to find that there can be solutions to just about any problem. By using the “ASK A QUESTION” link on the bottom of the page. We normally will respond to you within 24 hours or within the next day. Please describe the problem as throughly as possible, pictures are always helpful, so we can see what you are seeing. We reserve the right to determine whether the part(s) will need to be exchanged or another course of action may be taken to resolve this matter quickly and efficiently. We provide our services as a courtesy for all International Buyers ANYONE OUTSIDE THE U. The item “99-7524B Single & Double Din Radio Install Dash Kit for Mazda 6 Car Stereo Mount” is in sale since Tuesday, June 5, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “honestdee” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam, China, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Macao, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Russian federation.
  • Interchange Part Number: Aftermarket 2-Din Trim Plate & Wiring Harness
  • Color: Painted Charcoal Black
  • Manufacturer Part Number: Metra 99-7524B
  • Other Part Number: ISO-Din Installation Mounting Panel & Plugs
  • Brand: Metra 99-7524B CD Player DVD D-Din Adapter Bezel

Peterbilt 378 379 Single Lrg Headlight Wire Harness 16-07412 (1-8008)(pair)

Peterbilt 378 379 Single Lrg Headlight Wire Harness 16-07412 (1-8008)(pair)

KC TRUCK PARTS FOR YOUR HEAVY DUTY CLASS 8 TRUCK PARTS. VERY LARGE TRUCK JUNK YARD/HEAVY DUTY CLASS 8 TRUCK WRECKING/SALVAGE YARD, AND TRUCK RECYCLING. LOCATED IN THE GREAT NORTHWEST. NEW AFTERMARKET PETERBILT STYLE HEADLIGHT HARNESS’S, (PAIR) FITTING PETERBILT TRUCKS WITH SINGLE LARGE RECTANGLE HEADLIGHTS WITH SIGNAL LIGHTS ON END OF ALUMINUM PODS. Track Page Views With. Auctiva’s FREE Counter. The item “PETERBILT 378 379 SINGLE LRG HEADLIGHT WIRE HARNESS 16-07412 (1-8008)(PAIR)” is in sale since Thursday, March 15, 2018. This item is in the category “eBay Motors\Parts & Accessories\Commercial Truck Parts\Lighting\Headlights”. The seller is “kctruckparts509″ and is located in Spokane, Washington. This item can be shipped worldwide.
  • Manufacturer Part Number: 1-8008
  • Warranty: Yes
  • Brand: LKQ
  • Part Type: HEADLIGHT HARNESS’S
  • Country/Region of Manufacture: United States

Incoming search terms:

  • 2003 peterbilt complete headlight wiring harness

ITCFD04B Car Stereo Single & Double Din Radio Install Kit for F-Series Trucks

ITCFD04B Car Stereo Single & Double Din Radio Install Kit for F-Series Trucks

ITCFD04B Car Stereo Single & Double Din Radio Install Kit for F-Series Trucks

ITCFD04B Car Stereo Single & Double Din Radio Install Kit for F-Series Trucks

SCOSCHE ITCFD04B Aftermarket Single and Double-Din Radio Installation Kit For Select Ford F Series Trucks (PLEASE CHECK VEHICLE APPLICATIONS CHART AND EXCLUSIONS). For Use When Replacing the Factory OEM Radio With an Aftermarket Single or Double-Din Radio. THIS ITEM IS 100% BRAND NEW! Aftermarket Single & Double-DIN Radio Installation Kit. New (Factory Sealed Packaging). Painted Charcoal to Match Factory Finish & Texture. With 7×4 Inch Double Din Radios (See Notes Below). Compatible with Single Zone Climate Control and Two Buttons Above Radio Display. Recently Some Radio Manufacturers started making Double Din Radios with 7 Inch Screens (some slightly smaller). These Double Din Radios are about (7″ W x 4″ H) 7 inches wide by 4 inches tall. Unfortunately this new size “DOES NOT” work with Scosche Installation Kits without some modifications. Some of these kits have been manufactured for many years before this new size radio became available. As far as we know, none of the Aftermarket Kit Manufacturers are using this new size opening at this time. The Standard Radio Opening for this kit is approximately (6 7/8 in x 3 7/8 in) or (173mm x 98mm). If you have one of these larger radios, you will need to “SAND” or “FILE” the opening of the TRIM RING or BEZEL to make it large enough to clear the “FACE” of your radio. Unfortunately at this time there are no other alternatives that we know of. AN EXPLANATION OF DIFFERENT TYPES OF RADIOS AND COMPATIBILITY. ” NOT COMPATIBLE ” WHEN INSTALLING A FACTORY OEM RADIO OR ATTEMPTING A FACTORY RADIO SWAP. WHEN INSTALLING AN AFTERMARKET DOUBLE DIN RADIO. A DOUBLE DIN RADIO IS ABOUT 7 X 4 INCHES IN SIZE. ” NOT COMPATIBLE ” WHEN INSTALLING (2) STACKED ISO-DIN RADIOS TOGETHER. SEE ISO-DIN DESCRIPTION BELOW, BOTH UNITS SHOULD MATCH DESCRIPTION BELOW. ” NOT COMPATIBLE ” WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITH ” THE USE OF A RADIO SLEEVE OR CAN (USUALLY PROVIDED WITH YOUR RADIO). A SINGLE DIN RADIO IS ABOUT 7 X 2 INCHES IN SIZE AND HAS A METAL SLEEVE AROUND THE FIRST 3 INCHES OF THE RADIO. WHEN MOUNTING AN AFTERMARKET DIN SIZE RADIO ” WITHOUT ” THE USE OF A RADIO SLEEVE OR CAN, UNIT IS SCREW MOUNTED, MUST HAVE MOUNTING HOLES ON SIDE OF CHASSIS. UNIT IS A SINGLE DIN RADIO ABOUT 7 X 2 INCHES IN SIZE. If you are not sure if your radio will work with this kit, please use the “ASK A QUESTION” link on the bottom of the page. Please include your Radio Brand and Model Number for faster service. SCOSCHE ITCFD04B AFTERMARKET SINGLE & DOUBLE DIN RADIO INSTALLATION KIT. Allows Aftermarket Stereo to be Installed in Factory Location. Includes Dual Full Color Touch Screen System to Control A/C or Climate Controls, Steering Wheel Controls, Heated Seats (if Factory Equipped), Door Locks and Hazard Controls. Precision Designed for a Gapless Fit Between Dash and Kit. Painted and Textured to Match Factory Dash. Plugs Directly into Factory A/C Harness. Configurable for Single and Dual Climate Controls. Full Touchscreen A/C Controller. Includes Stereo Replacement Interface (Wiring Harness) and Antenna Adapter. Allows Factory Steering Wheel Control Retention for Most Aftermarket Stereos, Including Sony, Alpine, Kenwood, Clarion and JVC. High Quality Automotive Grade ABS Construction. No Special Tools Required, Easy Installation. If you have any questions, kindly use the “ASK A QUESTION” link on the bottom of the page. Ford F-250 Super Duty (2017-Up). Ford F-350 Super Duty (2017-Up). Ford F-450 Super Duty (2017-Up). Ford F-550 Super Duty (2017-Up). (1) SCOSCHE ITCFD04B Radio Trim Panel with Integrated Touchscreen Controls. (1) SCOSCHE Plug N Play A/C Adapter Harness. (1) SCOSCHE Radio Replacement Interface. (1) SCOSCHE Antenna Adapter. This ITEM ships “FREE” in the U. Protectorates and APO/FPO Addresses. Must have a valid U. We provide our services as a courtesy to all International Buyers. We are a U. Although these parts work with many vehicles outside the U. To research whether the part they are ordering will MATCH , FIT , WORK or is COMPATIBLE with their vehicle before purchasing. We suggest you check the online forums for your particular vehicle, normally you will find someone who has already posted on this topic and provided the needed information. We apologize, we cannot join every forum to do this. We do our very best to correctly represent all items we sell. Unfortunately, sometimes there may be incidents beyond our control. We realize this can be very frustrating and upsetting, but if you give us a chance, you might be pleasantly surprised to find that there can be solutions to just about any problem. By using the “ASK A QUESTION” link on the bottom of the page. We normally will respond to you within 24 hours or within the next day. Please describe the problem as throughly as possible, pictures are always helpful, so we can see what you are seeing. We reserve the right to determine whether the part(s) will need to be exchanged or another course of action may be taken to resolve this matter quickly and efficiently. INTERNATIONAL BUYERS: We provide our services as a courtesy for all International Buyers ANYONE OUTSIDE THE U. The item “ITCFD04B Car Stereo Single & Double Din Radio Install Kit for F-Series Trucks” is in sale since Tuesday, May 22, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts”. The seller is “installersonly” and is located in Seal Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Superseded Part Number: ITCFDO4B
  • Interchange Part Number: Aftermarket 2 Din ISO Trim Plate & Wiring Harness
  • Color: Painted Charcoal to Match Factory Color & Finish
  • Surface Finish: Textured and Painted to Match
  • Manufacturer Part Number: Scosche ITCFD04B
  • Other Part Number: Installation Mounting Dash Panel & Antenna Plug
  • Brand: Scosche ITCFD04B CD Player DVD D-Din Adapter Bezel
  • Supported Radio Sizes: Double Din, ISO Din Radio with Pocket
  • Product Type: Aftermarket Radio Car Stereo Installation Kit
  • Radio Opening Dimensions: 6 x 3 Inches (173mm x 98mm)
  • Radio Size Exclusions: DOES NOT Work With 7 x 4 IN (180mm x 100mm) Radios

Holden Hq Hj V8 253 308 Engine Single Headlight Wiring Loom Harness Looms

Holden Hq Hj V8 253 308 Engine Single Headlight Wiring Loom Harness Looms

NEW REWIRED HOLDEN HQ HJ V8 253 308 Complete Engine & Single Headlight wiring harness. This wire harness has been rewired as per the STD Loom with new wires & terminals. This is a complete loom from fire wall plug forward. Looms will fit 308 253 8cl with internal reg ALT & coil on the PASSENGERS side. This is used to replace old hard cracked STD engine looms. To be used in a performance application this loom does not have emission / aircon or idle solenoid wires. It has a 6mm main red (std one is 5mm) with a fusible link, 4mm headlight wire we use heat shrink & we solder the terminals. As this model loom was made so many ways as STD you will have to make sure this will fit you car and read all the listing. We allso need to know on what side of the main plug your wiper motor wires are on as some of the hq-j have them with the headlight loom and others are on the engine and if your loom uses a horn relay and twin horns etc. For headlight looms Unless you supply useable Std headlight plastic plugs This loom will be fitted with the newer plastic halogen headlight ones and have no parkers in with the headlights or you can send us your ones to be fitted. Photos are for display purposes only. The item “HOLDEN HQ HJ V8 253 308 ENGINE SINGLE HEADLIGHT WIRING LOOM HARNESS LOOMS” is in sale since Monday, January 9, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Lights, Indicators\Headlights”. The seller is “capri1276″ and is located in Mooroolbark, VIC. This item can be shipped worldwide.
  • Compatible Makes: Holden
  • Manufacturer: NKAParts
  • Product Type: Wiring loom
  • Holden Series: HQ HJ